h1

 

Vita

Christian Konrad, M.Sc. studied Mechanical Engineering at the University of Kaiserslauten from 2009 until 2014 with a specialization in design technology and machine construction.

Mr. Konrad wrote his Diploma dissertation about the "Investigation, comparison and implementation of modularization approaches to optimize a tram's model structure for dynamic multi-body simulation and driving comfort in SIMPACK".

He has been employed as a research associate at the MSE (formerly IKT) in the Department of Systems Engineering - Process Development (formerly PLM & VPE) since 2015. His research interests include model-based system development and variance control for integral products.

 

Publications

Source	Author(s)
[Contribution to a book, Contribution to a conference proceedings] Methode zur Analyse schlafender Fehler innerhalb einer Fehlermöglichkeits- und -einflussanalyse In: 15. Gemeinsames Kolloquium Konstruktionstechnik : Interdisziplinäre Produktentwicklung / Klaus Brökel, Gerhard Scharr, Karl-Heinrich Grote, Ralph H. Stelzer, Frank Rieg, Jörg Feldhusen, Norbert Müller, Armin Lohrengel, Peter Köhler, 99-108, 2017	Moselewski, Daniel (Corresponding author) Jacobs, Georg Löwer, Manuel Sulejmani, Fatmir Konrad, Christian et al.
[Contribution to a book, Contribution to a conference proceedings] Varianzsteuerung integraler Produkte durch den prozessbegleitenden Einsatz von Data-Mining Werkzeugen In: 15. Gemeinsames Kolloquium Konstruktionstechnik : Interdisziplinäre Produktentwicklung / Klaus Brökel, Gerhard Scharr, Karl-Heinrich Grote, Ralph H. Stelzer, Frank Rieg, Jörg Feldhusen, Norbert Müller, Armin Lohrengel, Peter Köhler, 213-222, 2017	Konrad, Christian (Corresponding author) Jacobs, Georg Löwer, Manuel Schmidt, Walter
[Contribution to a book, Contribution to a conference proceedings] Beiträge und Herausforderungen modellbasierter Systementwicklung in frühen Phasen des PEP aus Sicht der Forschung In: 15. Gemeinsames Kolloquium Konstruktionstechnik : Interdisziplinäre Produktentwicklung / Klaus Brökel, Gerhard Scharr, Karl-Heinrich Grote, Ralph H. Stelzer, Frank Rieg, Jörg Feldhusen, Norbert Müller, Armin Lohrengel, Peter Köhler, 171-181, 2017	Katzwinkel, Tim (Corresponding author) Jacobs, Georg Löwer, Manuel Konrad, Christian Moselewski, Daniel et al.
[Contribution to a book, Contribution to a conference proceedings] MBSE on parameter level In: Berechnung und Simulation: Anwendungen, Entwicklungen, Trends : NAFEMS 18 DACH Conference : 14-16 May, Bamberg, Germany : conference proceedings / NAFEMS, the International Association for the Engineering Modelling, Analysis and Simulation Community ; the conference is organized by NAFEMS Deutschland, Österreich, Schweiz GmbH, 129-132, 2018	Katzwinkel, Tim Jacobs, Georg von Fürstenberg, Franz Konrad, Christian Berroth, Joerg Karl
[Contribution to a conference proceedings] Implementing PLM by using a PDM-system in university education : evaluating 3 years of teaching In: [20th International Conference on Engineering & Product Design Education, E&PDE 2018, 2018-09-06 - 2018-09-07, London, UK], 80-85, 2018	Dittmann, Claudia Jacobs, Georg Katzwinkel, Tim Konrad, Christian Sulejmani, Fatmir et al.
[Contribution to a book, Contribution to a conference proceedings] Teaching virtual product design at university level : a review of 3 years of Freshman student education In: [20th International Conference on Engineering and Product Design Education (E&PDE 2018), Dyson School of Engineering, Imperial College, E&PDE 2018, 2018-09-06 - 2018-09-07, London, UK], 720-725, 2018	Weigel, Chantal Denise Jacobs, Georg Katzwinkel, Tim Dittmann, Claudia Konrad, Christian et al.
[Contribution to a book, Contribution to a conference proceedings] Sensordatenintegration in ein modellbasiertes Anforderungsmanagement In: Antriebstechnisches Kolloquium : ATK 2019, Aachen 12.-13. März : Tagungsband / Herausgegeben von Univ.-Prof. Dr.-Ing. Georg Jacobs und Jonas Marheineke, M.Sc. (Institut für Maschinenelemente und Systementwicklung); MSE, Institut für Maschinenelemente und Systementwicklung, RWTH Aachen University, 71-83, 2019 [DOI: 10.18154/RWTH-2019-05393]	Konrad, Christian Katzwinkel, Tim Jacobs, Georg
[Contribution to a conference proceedings, Journal Article] Enabling complexity management through merging business process modeling with MBSE In: Procedia CIRP, 84, 451-456, 2019 [DOI: 10.1016/j.procir.2019.04.267]	Konrad, Christian (Corresponding author) Jacobs, Georg Rasor, Rik Riedel, Ricarda Katzwinkel, Tim et al.
[Contribution to a conference proceedings] Application of data mining for the identification of parts for additive manufacturing In: [2020 International Conference on Intelligent Engineering and Management, ICIEM], 2020 [DOI: 10.1109/ICIEM48762.2020.9160307]	Winkler, Marcel Frederik (Corresponding author) Jacobs, Georg (Corresponding author) Stürmer, Stefan (Corresponding author) Konrad, Christian (Corresponding author)
[Contribution to a conference proceedings, Journal Article] Model-based product configuration of high variety product portfolios In: Proceedings of the Design Society / DESIGN conference, 1, 2435-2444, 2020 [DOI: 10.1017/dsd.2020.287]	Wyrwich, Christian Johannes (Corresponding author) Jacobs, Georg Siebrecht, Justus Konrad, Christian
[Contribution to a conference proceedings, Journal Article] Customer specific compatibility matrices for functional integral product architectures In: Proceedings of the Design Society / DESIGN conference, 1, 1105-1114, 2020 [DOI: 10.1017/dsd.2020.303]	Siebrecht, Justus (Corresponding author) Jacobs, Georg Konrad, Christian Wyrwich, Christian Johannes Schäfer, W.
[Contribution to a conference proceedings, Journal Article] Managing knowledge and parameter dependencies with MBSE in textile product development processes In: Procedia CIRP, 91, 170-175, 2020 [DOI: 10.1016/j.procir.2020.01.138]	Riedel, Ricarda (Corresponding author) Jacobs, Georg Konrad, Christian Singh, Rahul Sprehe, Jonathan
[Journal Article] Systematische Nutzung von Modellen in künftigen Produktentwicklungsprozessen In: News / Mitteilungen der WiGeP, 2020 (2), 8-10, 2020	Jacobs, Georg Berroth, Joerg Karl Höpfner, Gregor Sprehe, Jonathan Konrad, Christian
[Contribution to a book, Contribution to a conference proceedings] Mechanical concept development using principle solution models In: 19th Drive Train Technology Conference (ATK 2021) : 9th-11th March 2021, Aachen, Germany / editorial board: Prof. Dr.-Ing. Georg Jacobs, Sebastian Stein, M.Sc., 012001, 2021 [DOI: 10.1088/1757-899X/1097/1/012001]	Zerwas, Thilo (Corresponding author) Jacobs, Georg Spütz, Kathrin Höpfner, Gregor Drave, Imke Helene et al.
[Contribution to a book, Contribution to a conference proceedings] Evaluation of the Additive Manufacturability of CAD-Parts for initial Data Labelling in AI-based Part Identification In: 19th Drive Train Technology Conference (ATK 2021) : 9th-11th March 2021, Aachen, Germany / editorial board: Prof. Dr.-Ing. Georg Jacobs, Sebastian Stein, M.Sc., 012020, 2021 [DOI: 10.1088/1757-899X/1097/1/012020]	Winkler, Marcel Frederik (Corresponding author) Stürmer, Stefan Konrad, Christian
[Contribution to a book, Contribution to a conference proceedings] Evaluation of Parts for Additive Manufacturing utilizing System Models of AM Plants In: 19th Drive Train Technology Conference (ATK 2021) : 9th-11th March 2021, Aachen, Germany / editorial board: Prof. Dr.-Ing. Georg Jacobs, Sebastian Stein, M.Sc., 012022, 1-12, 2021 [DOI: 10.1088/1757-899X/1097/1/012022]	Winkler, Marcel Frederik (Corresponding author) Jacobs, Georg Spütz, Kathrin Konrad, Christian
[Contribution to a conference proceedings] Integration von Produktportfolios in die funktionsorientierte modellbasierte Systementwicklung In: Stuttgarter Symposium für Produktentwicklung SSP 2021 : Konferenz zum 6. Stuttgarter Symposium 2021 : Stuttgart, 20. Mai 2021, wissenschaftliche Konferenz / Fraunhofer-Institut für Arbeitswirtschaft und Organisation IAO ; Hansgeorg Binz, Bernd Bertsche, Dieter Spath, Daniel Roth (HRSG.), 211-222, 2021	Wyrwich, Christian Johannes Jacobs, Georg Spütz, Kathrin Zerwas, Thilo Konrad, Christian
[Book, Dissertation / PhD Thesis] Strategie zur Varianzbeherrschung kundenindividueller integraler Produkte In: Schriftenreihe Produktentwicklung und Konstruktionsmethodik 32, 2021	Konrad, Christian
[Contribution to a book] Function-Oriented Model-Based Product Development In: Design Methodology for Future Products : Data Driven, Agile and Flexible / Dieter Krause, Emil Heyden, 131, 2021	Jacobs, Georg Konrad, Christian Berroth, Joerg Karl Zerwas, Thilo Höpfner, Gregor et al.
[Journal Article] Integration of Production and Cost Models in Model-Based Product Development In: Open Journal of Social Sciences, 9 (12), 53-64, 2021 [DOI: 10.4236/jss.2021.912004]	Spütz, Kathrin (Corresponding author) Jacobs, Georg Konrad, Christian Wyrwich, Christian Johannes
[Contribution to a conference proceedings, Journal Article] Methodical approach for manufacturing-oriented concept development for Tailored Textiles In: Procedia CIRP, 109, 125-133, 2022 [DOI: 10.1016/j.procir.2022.05.225]	Stein, Sebastian Andreas (Corresponding author) Jacobs, Georg Riedel, Ricarda Steinlein, Julius Spütz, Kathrin et al.
[Contribution to a conference proceedings, Journal Article] Classification of Simulation Models for the Model-based Design of Plastic-Metal Hybrid Joints In: Procedia CIRP, 109, 37-42, 2022 [DOI: 10.1016/j.procir.2022.05.211]	Spütz, Kathrin (Corresponding author) Berges, Julius Moritz Jacobs, Georg Berroth, Joerg Karl Konrad, Christian
[Contribution to a conference proceedings, Journal Article] Classification of Simulation Models for the Model-based Design of Plastic-Metal Hybrid Joints In: Procedia CIRP, 109, 37-42, 2022	Spütz, Kathrin (Corresponding author) Berges, Julius Moritz Jacobs, Georg Berroth, Joerg Karl Konrad, Christian
[Contribution to a conference proceedings, Journal Article] Methodical approach for manufacturing-oriented concept development for Tailored Textiles In: Procedia CIRP, 109, 125-133, 2022	Stein, Sebastian Andreas (Corresponding author) Jacobs, Georg Riedel, Ricarda Steinlein, Julius Spütz, Kathrin et al.
[Journal Article] Von der Idee zum Bauteil : digitaler Produktionsentstehungsprozess zur Auslegung von Tailored-Fibre-Placement-Bauteilen In: AVK-composites report, 2022 (6), 19-21, 2022	Emmerich, Rebecca Quadflieg, Till Arne Gries, Thomas Aguirre Guerrero, Diego Armando Konrad, Christian et al.
[Contribution to a book, Journal Article] Automated Identification of Valid Model Networks Using Model-Based Systems Engineering In: Systems : open access journal, 10 (6), 250, 2022 [DOI: 10.3390/systems10060250]	Berges, Julius Moritz (Corresponding author) Spütz, Kathrin Jacobs, Georg Kowalski, Julia Zerwas, Thilo et al.
[Contribution to a book, Contribution to a conference proceedings] Automated Identification of Geometric Structures with Potential for Functional Integration In: Innovative product development by additive manufacturing / Roland Lachmayer, Behrend Bode, Stefan Kaierle Editors, 243-256, 2022 [DOI: 10.1007/978-3-031-05918-6_16]	Winkler, Marcel Frederik (Corresponding author) Jacobs, Georg Fastabend, Philipp Jonas Konrad, Christian
[Contribution to a book] Automation in Active Surface-Based Design Generation for Additive Manufacturing In: Innovative Product Development by Additive Manufacturing 2022 / Lachmayer, Roland (Editor), 2023 [DOI: 10.1007/978-3-031-27261-5_2]	Winkler, Marcel Frederik Jacobs, Georg Gessert, Jo Konrad, Christian Keßler, Stefan
[Journal Article] Modeling language for the function-oriented development of mechatronic systems with motego : Modellierungssprache für die funktionsorientierte Entwicklung von mechatronischen Systemen mit motego In: Forschung im Ingenieurwesen = Engineering research, 12 Seiten, 2023 [DOI: 10.1007/s10010-023-00623-4]	Spütz, Kathrin (Corresponding author) Jacobs, Georg Zerwas, Thilo Konrad, Christian