Person
Apl. Prof. Dr.Ralf Schelenz
Head of Plant and Farm Design
Address
Building: 4741
Room: 404
Campus Boulevard 61
52074 Aachen
Contact
- WorkPhone
- Phone: +49 241 80 96797
Office Hours
- by appointment
Vita
Prof. Dr. R. Schelenz studied construction design at RWTH Aachen University from 1984 to 1989. In 1994 he received his doctorate in mechanical engineering at the Institute for Machine Elements and Machine Design (IME), where he has been working as Senior Research Engineer with the Drive Technology group from 1995 on. Focusing on the drivetrain, the group has been investigating on the complex dynamical behavior of wind turbines in numerous research and bilateral industrial projects over the last 20 years. Today the institute works on system simulation codes as well as component and whole nacelle system test rigs.
Since 2013, Mr. Schelenz has been Managing Director of the Center for Wind Power Drives and coordinates the interdisciplinary projects.
Publications
Source | Author(s) |
---|---|
A system modeling process based on SysML to support data consistency across system requirement, function, and solution model layers Journal Article (2023) | Zhang, Yizhe (Corresponding author) Jacobs, Georg Yu, Wei Höpfner, Gregor Berroth, Joerg Karl |
Calculation of tooth pair stiffness by finite element analysis for the multibody simulation of flexible gear pairs with helical teeth and flank modifications Journal Article (2023) | Andary, Faysal (Corresponding author) Heinzel, Christine Wischmann, Stefan Tobias Berroth, Joerg Karl Jacobs, Georg |
An Improved Method for Fem Modeling and Param- Eter Identification of Damping in Bolted Lap Joints Using Zero-Thickness Elements Contribution to a conference proceedings (2023) | Wischmann, Stefan Tobias Berroth, Joerg Karl König, Florian Jacobs, Georg |
Identification and Evaluation of Parameter Conflicts in Product Development Processes Contribution to a conference proceedings, Journal Article (2023) | Riedel, Ricarda (Corresponding author) Jacobs, Georg Florides, Constantinos Spütz, Kathrin Konrad, Christian Wieja, Franziska Anna |
Knowledge-supported Development of Function Models for Mechanical Products Using Intelligent Function Libraries Contribution to a conference proceedings, Journal Article (2023) | Spütz, Kathrin (Corresponding author) Jacobs, Georg Konrad, Christian Wieja, Franziska Anna Stürmer, Stefan |
Sensorintegrierende Gleitlager - Energieautarkes, temperaturbasiertes Zustandsüberwachungssystem Contribution to a book, Contribution to a conference proceedings (2023) | Baszenski, Julian Thao Jacobs, Georg Lehmann, Benjamin Felix Kauth, Kevin Kratz, Karl-Heinz Gemmeke, Tobias |
Schlussbericht: Integration menschlichen Expertenwissens in die Steuerung von Baumaschinen durch Machine Learning Methoden zum IGF-Vorhaben Nr. 21250N Report (2023) | Gentz, Christian Robert Maria Zhou, Hans Aoyang Gannouni, Aymen Keller, Dennis Abdelrazeq, Anas Neumann, Stephan Habermehl, Christian Höpfner, Gregor Jacobs, Georg Hees, Erhard |
Optimization workflow to parameterize elastomer material models based on arbitrary time‐domain measurement data Journal Article (2023) | Rapp, Tobias (Corresponding author) Jacobs, Georg Berroth, Joerg Karl Bauermeister, Ralf Wischmann, Stefan Tobias |
Rechnergestützte Prognose des dynamischen Verhaltens von Elastomerkupplungen in stoßbelasteten Antriebssträngen - Abschlussbericht Report (2023) | Rapp, Tobias Jacobs, Georg Berroth, Joerg Karl |
CWD & DSEC 2023 Proceedings (2023) | Jacobs, Georg (Editor) |
Towards hierarchical workflows in sysml to support virtual validation of technical systems Contribution to a book, Journal Article (2023) | Zhang, Yizhe (Corresponding author) Jacobs, Georg Höpfner, Gregor Berroth, Joerg Karl |
Fügestellenmodellierung für die Sytemsimulation - Abschlussbericht Report (2023) | Wischmann, Stefan Tobias Berroth, Joerg Karl Jacobs, Georg |
Experimental Validation of a Structure-Borne Sound Model of a Direct Drive Wind Turbine Generator Journal Article (2023) | Decker, Thomas Matthias (Corresponding author) Cardaun, Martin Mülder, Christoph Duda, Tobias Philipp Roman Bosse, Dennis Jacobs, Georg Büschel, Alexander |
Numerische Transferpfadanalyse zur modellbasierten Optimierung des Geräuschverhaltens von Antriebssträngen Contribution to a conference proceedings (2023) | Wischmann, Stefan Tobias Pasch, Gerwin Jacobs, Georg Berroth, Joerg Karl |
Customer-centric and function-oriented development of mechatronic systemsKundenzentrierte und funktionsorientierte Entwicklung mechatronischer Systeme Contribution to a conference proceedings, Journal Article (2023) | Zerwas, Thilo (Corresponding author) Jacobs, Georg Brand, L. Dehn, Simon Michael Spütz, Kathrin Höpfner, Gregor Matz, C. Guist, C. Berroth, Joerg Karl Konrad, Christian Kohl, J. |
On identifying possible artificial intelligence applications in requirements engineering processes Contribution to a conference proceedings, Journal Article (2023) | Dehn, Simon Michael (Corresponding author) Jacobs, Georg Zerwas, Thilo Berroth, Joerg Karl Hötter, Matthis Peter Korten, Matthias Müller, Marvin Gossen, Nico Striegel, Serena Fleischer, Dirk |
An Interdisciplinary Approach to Local Strength Assessment of Cast Iron Components to Exploit Unused Component Potential Contribution to a conference proceedings (2023) | Weber, Felix Züch, Vitali Gebhardt, Nils Christian Bezold, Alexander Broeckmann, Christoph Bosse, Dennis Jacobs, Georg Gurevich, Vitalii Bodenburg, Mathias |
Multi-domain optimization of cast iron components in wind turbines Contribution to a conference proceedings, Journal Article (2023) | Weber, Felix (Corresponding author) Broeckmann, Christoph Züch, Vitali Jacobs, Georg Zimmermann, Jannik Schröder, Kai-Uwe Bami, Youness Jakumeit, Jürgen Bodenburg, Mathias Weiß, Reinhard |
Model-based NVH optimization of a tractor drivetrain during different phases of a design adaption Contribution to a conference proceedings, Journal Article (2023) | Müller, Julius (Corresponding author) Jacobs, Georg Ramm, Marco Wischmann, Stefan Tobias Jagla, Patrick Karol Berroth, Joerg Karl |
Combining and evaluating function-oriented solutions in model-based systems engineering Contribution to a conference proceedings, Journal Article (2023) | Irnich, Lukas (Corresponding author) Jacobs, Georg Zerwas, Thilo Konrad, Christian |
An investigation into the transferability of dynamic elastomer dampers’ properties between different damper sizes using FEM Contribution to a conference proceedings, Journal Article (2023) | Rapp, Tobias (Corresponding author) Jacobs, Georg Berroth, Joerg Karl Kleinewegen, Stefan |
Reduction of wind turbine gearbox damage risk due to electrical faults via component design optimization Contribution to a conference proceedings, Journal Article (2023) | Röder, Julian (Corresponding author) Jacobs, Georg Bosse, Dennis Herzog, Fabian Zang, Aaron |
Comparison of transfer path characteristics for different wind turbine drivetrain variations Contribution to a conference proceedings, Journal Article (2023) | Schünemann, Wilhelm Franz Nikolaus (Corresponding author) Schelenz, Ralf Jacobs, Georg |
Influence of drivetrain efficiency determination on the torque control of wind turbines Contribution to a conference proceedings, Journal Article (2023) | Zweiffel, Maximilian (Corresponding author) Jacobs, Georg Song, Z. Weidinger, P. Decker, Thomas Matthias Röder, Julian Bosse, Dennis |
CFD investigation of starvation behaviors in a grease lubricated EHL rolling contact : CFD-Simulation von Starvation im fettgeschmierten EHL-Wälzkontakt Journal Article (2023) | Zhang, Shuo (Corresponding author) Jacobs, Georg Vafaei, Seyedmohammad von Goeldel, Stephan Michael Eike König, Florian |
Reusable workflows for virtual testing of multidisciplinary products in system models Contribution to a conference proceedings, Journal Article (2023) | Berges, Julius Moritz (Corresponding author) Spütz, Kathrin Zhang, Yizhe Höpfner, Gregor Berroth, Joerg Karl Konrad, Christian Jacobs, Georg |
Simulation methodology for the identification of critical operating conditions of planetary journal bearings in wind turbines Contribution to a conference proceedings, Journal Article (2023) | Lucassen, Mattheüs Antonius Theodoor Hubertus (Corresponding author) Decker, Thomas Matthias Guzmán, Francisco Gutiérrez Lehmann, Benjamin Felix Bosse, Dennis Jacobs, Georg |
Classification of function-oriented solution elements for MBSE Contribution to a conference proceedings, Journal Article (2023) | Jagla, Patrick Karol (Corresponding author) Jacobs, Georg Spütz, Kathrin Berroth, Joerg Karl |
Development of a pre-screening-method for the qualification of environmentally acceptable lubricants for stern tube systems—The evaluation of friction efficiency and scuffing capacity Contribution to a book, Journal Article (2023) | Bürger, Marius (Corresponding author) Jacobs, Georg von Goeldel, Stephan Michael Eike König, Florian |
Investigation on the impact of electrical faults on the loads and exposures of wind turbine gears Contribution to a conference proceedings, Journal Article (2023) | Roth, Laurenz Fabian (Corresponding author) Röder, Julian Brimmers, Jens Bosse, Dennis Brecher, Christian Jacobs, Georg |
Modeling language for the function-oriented development of mechatronic systems with motego : Modellierungssprache für die funktionsorientierte Entwicklung von mechatronischen Systemen mit motego Journal Article (2023) | Spütz, Kathrin (Corresponding author) Jacobs, Georg Zerwas, Thilo Konrad, Christian |
Automation in Active Surface-Based Design Generation for Additive Manufacturing Contribution to a book (2023) | Winkler, Marcel Frederik Jacobs, Georg Gessert, Jo Konrad, Christian Keßler, Stefan |
Effect of Electrification on the Quantitative Reliability of an Offshore Crane Winch in Terms of Drive-Induced Torque Ripples Journal Article (2023) | Mohamed, Mohamed Yousri Abdelmeguid (Corresponding author) Jacobs, Georg (Corresponding author) Neumann, Stephan (Corresponding author) |
From Strain to Loads : Development of a Measurement Solution for Wind Turbine Transmission Input Loads during Drivetrain Testing Contribution to a book, Journal Article (2023) | Bilen, Eren Azzam, Baher (Corresponding author) Schelenz, Ralf Runkel, Tim Raddatz, Malte Jacobs, Georg |
Towards a Holistic and Functional Model-Based Design Method for Mechatronic Cyber-Physical Systems Journal Article (2023) | Höpfner, Gregor (Corresponding author) Nachmann, Imke Helene Zerwas, Thilo Berroth, Joerg Karl Kohl, Jens Guist, Christian Rumpe, Bernhard Jacobs, Georg |
Sensor integrating plain bearings : design of an energy-autonomous, temperature-based condition monitoring system Contribution to a conference proceedings, Journal Article (2023) | Baszenski, Julian Thao (Corresponding author) Kauth, Kevin Kratz, Karl-Heinz Gutierrez Guzman, Francisco Gerardo Antonio Jacobs, Georg Gemmeke, Tobias |
Combining sensitivity and uncertainty analysis to efficiently quantify parametric uncertainties in NVH system simulation models Contribution to a conference proceedings, Journal Article (2023) | Wischmann, Stefan Tobias (Corresponding author) Drichel, Pascal Jacobs, Georg Berges, Julius Moritz Berroth, Joerg Karl |
Preface CWD & DSEC 2023 Contribution to a conference proceedings, Journal Article (2023) | Jacobs, Georg (Corresponding author) |
Model Signatures for Design and Usage of Simulation-Capable Model Networks in MBSE Contribution to a book, Contribution to a conference proceedings (2023) | Husung, Stephan (Corresponding author) Gerhard, Detlef Jacobs, Georg Kowalski, Julia Rumpe, Bernhard Zeman, Klaus Zerwas, Thilo |
Machine learning based surrogate modelling for the prediction of maximum contact temperature in EHL line contacts Journal Article (2022) | Singh, Ankit (Corresponding author) Wolf, M. Jacobs, Georg König, Florian (Corresponding author) |
From Simulations to Accelerated Testing : Design of Experiments for Accelerated Load Testing of a Wind Turbine Drivetrain Based on Aeroelastic Multibody Simulation Data Contribution to a book, Journal Article (2022) | Azzam, Baher (Corresponding author) Schelenz, Ralf Cardaun, Martin Jacobs, Georg |
Investigation of Microflow Effects in Textures on Hydrodynamic Performance of Journal Bearings Using CFD Simulations Journal Article (2023) | Wang, Yujun (Corresponding author) Jacobs, Georg (Corresponding author) König, Florian Zhang, Shuo von Goeldel, Stephan Michael Eike |
Prediction of film thickness in starved EHL point contacts using two-phase flow CFD model Journal Article (2022) | Zhang, Shuo (Corresponding author) Jacobs, Georg von Goeldel, Stephan Michael Eike Vafaei, Seyedmohammad König, Florian |
Automated Identification of Geometric Structures with Potential for Functional Integration Contribution to a book, Contribution to a conference proceedings (2022) | Winkler, Marcel Frederik (Corresponding author) Jacobs, Georg Fastabend, Philipp Jonas Konrad, Christian |
Enhanced method for optimum driving point identification for modal testing Journal Article (2022) | Pasch, Gerwin (Corresponding author) Wischmann, Stefan Tobias Drichel, Pascal Jacobs, Georg Berroth, Joerg Karl |
Wear prediction for plain bearings under start-stop conditions Contribution to a conference proceedings (2022) | König, Florian Jacobs, Georg |
Classification of Engineering Models by Physical Effects Contribution to a book, Contribution to a conference proceedings (2022) | Jagla, Patrick Karol (Corresponding author) Jacobs, Georg (Corresponding author) Höpfner, Gregor (Corresponding author) Berroth, Joerg Karl (Corresponding author) Jin, Kaihao (Corresponding author) |
Development of System Alternatives using Generative Engineering Contribution to a book, Contribution to a conference proceedings (2022) | Menninger, Bastian (Corresponding author) Berroth, Joerg Karl (Corresponding author) Jacobs, Georg (Corresponding author) |
Towards Digitalization of Physical Effect Libraries Contribution to a book, Contribution to a conference proceedings (2022) | Meißner, Maximilian (Corresponding author) Dehn, Simon Michael (Corresponding author) Jacobs, Georg (Corresponding author) Berges, Julius Moritz (Corresponding author) Berroth, Joerg Karl (Corresponding author) Guist, Christian (Corresponding author) |
Automated Identification of Valid Model Networks Using Model-Based Systems Engineering Contribution to a book, Journal Article (2022) | Berges, Julius Moritz (Corresponding author) Spütz, Kathrin Jacobs, Georg Kowalski, Julia Zerwas, Thilo Berroth, Joerg Karl Konrad, Christian |
Von der Idee zum Bauteil : digitaler Produktionsentstehungsprozess zur Auslegung von Tailored-Fibre-Placement-Bauteilen Contribution to a book, Journal Article (2022) | Emmerich, Rebecca (Corresponding author) Quadflieg, Till Arne Gries, Thomas Aguirre Guerrero, Diego Armando Konrad, Christian Jacobs, Georg Jang, Seoyoon Bäß, Moritz Schröder, Kai-Uwe |
Characterization of elastohydrodynamic contact film thickness under high frequency force excitation using a 2D unwrapping-based image processing technique Journal Article (2022) | Golafshan, Reza (Corresponding author) Su, Boquan Jacobs, Georg Berroth, Joerg Karl |
Towards a Model-Based Approach for the Optimization of the Mechanical and Economical Properties of Laser-Based Plastic-Metal Joints Journal Article (2022) | Berges, Julius Moritz (Corresponding author) van der Straeten, Kira Martina (Corresponding author) Jacobs, Georg (Corresponding author) Berroth, Joerg Karl (Corresponding author) |
Vernetzung von Simulationsmodellen und Model-Based Systems Engineering zur virtuellen Produktentwicklung Contribution to a conference proceedings (2022) | Berges, Julius Moritz Jacobs, Georg Höpfner, Gregor Zhang, Yizhe Berroth, Joerg Karl |
FVA 137 VII - MatLab-Anwendung zur Freilauf-Dimensionierung Report (2022) | Saleh, Ahmed Jacobs, Georg Gutierrez Guzman, Francisco Gerardo Antonio |
Development of a Methodology for a WT Gearbox Robustness Test Journal Article (2022) | Gnauert, Jonas (Corresponding author) Krause, Alexander Wilhelm Jacobs, Georg Bosse, Dennis |
Method to identify insufficient sub-models in MBS models of wind turbine drivetrains Contribution to a conference proceedings, Journal Article (2022) | Züch, Vitali (Corresponding author) Jacobs, Georg Loriemi, Amin Jakobs, Timm Nievelstein, Lucas |
Evaluating the Communication Infrastructure of a Digital Process Platform for Future Construction Sites Contribution to a book, Contribution to a conference proceedings (2022) | Gannouni, Aymen (Corresponding author) Otte, Thomas (Corresponding author) Zhou, Hans Aoyang (Corresponding author) Hosan, Arif (Corresponding author) Odenthal, Jonas (Corresponding author) Abdelrazeq, Anas (Corresponding author) Neumann, Stephan (Corresponding author) Jacobs, Georg (Corresponding author) Hees, Frank (Corresponding author) |
Model Signatures for the Integration of Simulation Models into System Models Journal Article (2022) | Zerwas, Thilo (Corresponding author) Jacobs, Georg Kowalski, Julia Husung, Stephan Gerhard, Detlef Rumpe, Bernhard Zeman, Klaus Vafaei, Seyedmohammad König, Florian Höpfner, Gregor |
A Numerical Approach for the Efficient Concept Design of Laser-Based Hybrid Joints Contribution to a book, Journal Article (2022) | Berges, Julius Moritz (Corresponding author) Jacobs, Georg Berroth, Joerg Karl |
A Classification Method for the Systematic Identification of Models and Workflows in MBSE Abstract, Contribution to a conference proceedings (2022) | Höpfner, Gregor (Corresponding author) Kowalski, Julia Faustmann, Clemens Zerwas, Thilo Kranabitl, Philipp Vafaei, Seyedmohammad Jacobs, Georg Hick, Hannes |
Umweltverträgliche Esterschmierstoffe - Schmierstoffqualifizierung für den Einsatz in Stevenrohrlagern Contribution to a conference proceedings (2022) | Bürger, Marius Jacobs, Georg von Goeldel, Stephan Michael Eike König, Florian |
Modellierung und Analyse funktionaler Varianz komplexer technischer Systeme Contribution to a conference proceedings (2022) | Menninger, Bastian Wiechel, Dominik Rackow, Sascha Höpfner, Gregor Oleff, Christian Berroth, Joerg Karl Gräßler, Iris Jacobs, Georg |
Virtual Testing Workflows Based on the Function-Oriented System Architecture in SysML: A Case Study in Wind Turbine Systems Contribution to a book, Journal Article (2022) | Zhang, Yizhe (Corresponding author) Röder, Julian Jacobs, Georg Berroth, Joerg Karl Höpfner, Gregor |
FVA 830 I - Mindestlast von Wälzlagern Report (2022) | Sebteini, Seiedardeshir Rüth, Lukas Hudak, R. Sous, Christopher Gutierrez Guzman, Francisco Gerardo Antonio Sauer, Bernd Koch, Oliver Jacobs, Georg |
Planetenradgleitlager : theoretische Modellbildung und experimentelle Analyse zur Beschreibung der hydrodynamischen Verhältnisse in Planetenradgleitlagern : FVA-Nr. 794 I : Abschlussbericht Book, Report (2022) | Baumann, Frank Wiersch, Petra Arnold, D. Radtke, E. Marheineke, Jonas Hagemann, Thomas Sous, Christopher Gutierrez Guzman, Francisco Gerardo Antonio Schwarze, H. Jacobs, Georg |
FVA 776 I - Rollenfreilauf Härteprofil Report (2022) | Dreiseidler, Simon Martinewski, Viktor Sous, Christopher Gutierrez Guzman, Francisco Gerardo Antonio Jacobs, Georg Lohrengel, Armin |
FVA 707 VII - WEC: Wärmebehandlung und Werkstoffe Gegenmaßnahmen Report (2022) | Habermehl, Christian Steinweg, Florian Mikitisin, Adrian Gutierrez Guzman, Francisco Gerardo Antonio Janitzky, Thomas L. M. Mayer, Joachim Broeckmann, Christoph Jacobs, Georg |
Formation of White Etching Crack under sliding, boundary lubrication and additional current passage using modern lubricant compositions Contribution to a book, Contribution to a conference proceedings (2022) | Cornel, Daniel Steinweg, Florian Gutierrez Guzman, Francisco Gerardo Antonio Jacobs, Georg Mikitisin, Ardrian |
Simulation based prediction of ring creep on a planetary bearing of a 1MW wind turbine gearbox Contribution to a conference proceedings, Journal Article (2022) | Gnauert, Jonas (Corresponding author) Krause, Alexander Wilhelm Jacobs, Georg Bosse, Dennis Zang, Aaron |
Experimental Analysis of Planet Carrier Bearing Loads under Torque and Bending Moment in a Four-Point-Suspension Drive Train Contribution to a conference proceedings, Journal Article (2022) | Krause, Alexander Wilhelm (Corresponding author) Gnauert, Jonas Jacobs, Georg Bosse, Dennis Schmitz, Lukas |
Electrical Bearing Damage, A Problem in the Nano- and Macro-Range Contribution to a book, Journal Article (2022) | Schneider, Volker (Corresponding author) Behrendt, Cara Höltje, Pauline Cornel, Daniel Becker-Dombrowsky, Florian Michael Puchtler, Steffen Gutiérrez Guzmán, Francisco Gerardo Antonio Ponick, Bernd Jacobs, Georg Kirchner, Eckhard |
Einfluss von Eiskollisionslasten am Propeller auf die Kontaktzustände in den Antriebsstranggleitlagern von Schiffen Journal Article (2022) | Lehmann, Benjamin Felix Gutierrez Guzman, Francisco Gerardo Antonio Jacobs, Georg |
Methodical approach for manufacturing-oriented concept development for Tailored Textiles Contribution to a book, Contribution to a conference proceedings, Journal Article (2022) | Stein, Sebastian Andreas (Corresponding author) Jacobs, Georg Riedel, Ricarda Steinlein, Julius Spütz, Kathrin Konrad, Christian |
Classification of Simulation Models for the Model-based Design of Plastic-Metal Hybrid Joints Contribution to a book, Contribution to a conference proceedings, Journal Article (2022) | Spütz, Kathrin (Corresponding author) Berges, Julius Moritz Jacobs, Georg Berroth, Joerg Karl Konrad, Christian |
Classification of Simulation Models for the Model-based Design of Plastic-Metal Hybrid Joints Contribution to a conference proceedings, Journal Article (2022) | Spütz, Kathrin (Corresponding author) Berges, Julius Moritz Jacobs, Georg Berroth, Joerg Karl Konrad, Christian |
Methodical approach for manufacturing-oriented concept development for Tailored Textiles Contribution to a conference proceedings, Journal Article (2022) | Stein, Sebastian Andreas (Corresponding author) Jacobs, Georg Riedel, Ricarda Steinlein, Julius Spütz, Kathrin Konrad, Christian |
On the influence of surface sealant on the nonlinear dynamics of jointed structures Journal Article (2022) | Wischmann, Stefan Tobias (Corresponding author) Seifert, Karl-Heinz Berroth, Joerg Karl Jacobs, Georg |
Optimization Workflows for Linking Model-Based Systems Engineering (MBSE) and Multidisciplinary Analysis and Optimization (MDAO) Contribution to a book, Journal Article (2022) | Habermehl, Christian (Corresponding author) Höpfner, Gregor Berroth, Joerg Karl Neumann, Stephan Jacobs, Georg |
Synthesis and tribological behavior of bio-based lubrication greases with bio-based polyester thickener systems Journal Article (2022) | Vafaei, Seyedmohammad (Corresponding author) Jopen, Max Jacobs, Georg König, Florian Weberskirch, Ralf (Corresponding author) |
Reduction of gearbox loads of a DFIG wind turbine during grid faults with optimized converter configurations Contribution to a conference proceedings, Journal Article (2022) | Röder, Julian (Corresponding author) Jacobs, Georg Bosse, Dennis Izal, J. L. R. |
Multi-Physical Simulation Toolchain for the Prediction of Acoustic Emissions of Direct Drive Wind Turbines Contribution to a conference proceedings, Journal Article (2022) | Cardaun, Martin (Corresponding author) Mülder, Christoph Decker, Thomas Matthias Dilba, Boris Duda, Tobias Philipp Roman Schelenz, Ralf Jacobs, Georg Hameyer, Kay Keuchel, Sören |
Sensitivity analysis of geometrical design parameters on the performance of conical plain bearings for use as main bearings in wind turbines Contribution to a conference proceedings, Journal Article (2022) | Rolink, Amadeus Franziskus (Corresponding author) Jacobs, Georg Pérez, Alex Bosse, Dennis Jakobs, Timm |
Investigation of manufacturing-related deviations of the bearing clearance on the performance of a conical plain bearing for the application as main bearing in a wind turbine Contribution to a conference proceedings, Journal Article (2022) | Rolink, Amadeus Franziskus (Corresponding author) Jacobs, Georg Müller, Matthias S. Jakobs, Timm Bosse, Dennis |
Simulative Investigation of the Risk of Smearing Damage for a WT Gearbox Roller Bearing during Rotor-Induced Excitations Journal Article (2022) | Euler, Jan (Corresponding author) Jacobs, Georg Röder, Julian Bosse, Dennis |
Investigation of a converter fault for a DFIG wind turbine and analysis of the resulting gearbox component loads Contribution to a conference proceedings, Journal Article (2022) | Röder, Julian (Corresponding author) Jacobs, Georg Bosse, Dennis Herzog, Fabian Graf, Lukas |
Sensor Screening Methodology for Virtually Sensing Transmission Input Loads of a Wind Turbine Using Machine Learning Techniques and Drivetrain Simulations Contribution to a book, Journal Article (2022) | Azzam, Baher (Corresponding author) Schelenz, Ralf Jacobs, Georg |
Auto-informative Gleitlager - Konzept einer autarken, temperaturbasierten Zustandsüberwachung Contribution to a book, Contribution to a conference proceedings (2022) | Marheineke, Jonas Jacobs, Georg Gutierrez Guzman, Francisco Gerardo Antonio Gemmeke, Tobias Kauth, Kevin Baszenski, Julian Thao Kratz, Karl-Heinz |
Polymer-coated plain bearings during start-stop operation - an experimental and numerical assessment Contribution to a book, Contribution to a conference proceedings (2022) | König, Florian Jacobs, Georg |
High pressure, high shear viscometry - Lubricant characterization for highly loaded contacts Contribution to a book, Contribution to a conference proceedings (2022) | Mebus, Julian Lukas Jacobs, Georg Larriere, Clément Riss, Arnaud Raisin, Jonathan König, Florian |
Determining Dynamic Properties of Elastomer-Dampers by Means of Impact Testing Journal Article (2022) | Rapp, T. (Corresponding author) Jacobs, Georg Berroth, Joerg Karl Guenther, J. |
Wind turbine drivetrains : state-of-the-art technologies and future development trends Journal Article (2022) | Nejad, Amir R. (Corresponding author) Keller, Jonathan Guo, Yi Sheng, Shawn Polinder, Henk Watson, Simon Dong, Jianning Qin, Zian Ebrahimi, Amir Schelenz, Ralf Gutierrez Guzman, Francisco Gerardo Antonio Cornel, Daniel Golafshan, Reza Jacobs, Georg Blockmans, Bart Bosmans, Jelle Pluymers, Bert Carroll, James Koukoura, Sofia Hart, Edward McDonald, Alasdair Natarajan, Anand Torsvik, Jone Moghadam, Farid K. Daems, Pieter-Jan Verstraeten, Timothy Peeters, Cédric Helsen, Jan |
Estimation of rotor and main bearing loads using artificial neural networks Journal Article (2022) | Loriemi, Amin (Corresponding author) Jacobs, Georg Bosse, Dennis |
Accelerated White Etch Cracking (WEC) FE8 type tests of different bearing steels using ceramic rollers Journal Article (2021) | Danielsen, H. K. (Corresponding author) Gutierrez Guzman, Francisco Gerardo Antonio Fæster, S. Shirani, M. Rasmussen, B. H. Linzmayer, Martin Jacobs, Georg |
Method for holistic wind turbine drivetrain comparison exemplarily applied to geared and direct drive systems Journal Article (2021) | Harzendorf, Freia (Corresponding author) Schelenz, Ralf Jacobs, Georg |
Development and validation of a parametric human mandible model to determine internal stresses for the future design optimization of maxillofacial implants Journal Article (2021) | Wieja, Franziska Anna (Corresponding author) Jacobs, Georg Stein, Sebastian Andreas Kopp, Alexander van Gaalen, Kerstin Kröger, Nadja Zinser, Max |
Einfluss von impulsartigen Belastungen auf die elastohydrodynamischen Kontaktzustände in Gleitlagern von Schiffsantrieben Contribution to a conference proceedings (2021) | Lehmann, Benjamin Felix Jacobs, Georg Gutierrez Guzman, Francisco Gerardo Antonio |
Risse auf Lagerringe III: Gefügeveränderungen in Wälzlagerringen mit Rissen als Folgeschaden Book, Report (2021) | Steinweg, Florian Mikitisin, Adrian Cornel, Daniel Gutierrez Guzman, Francisco Gerardo Antonio Janitzky, Thomas L. M. Schwedt, Alexander Burghardt, Gero Sous, Christopher Mayer, Joachim Broeckmann, Christoph Jacobs, Georg |
19th Drive Train Technology Conference (ATK 2021) : 9th-11th March 2021, Aachen, Germany Book, Proceedings (2021) | Jacobs, Georg (Editor) Stein, Sebastian Andreas (Editor) |
Running-in of plain bearings with polyamide-imide anti-friction coatings during start-stop operation Contribution to a conference proceedings (2021) | König, Florian Jacobs, Georg von Goeldel, Stephan Michael Eike |
White Etching Cracks in oil lubricated rolling/sliding contacts - Influencing factors on WEC formation Contribution to a conference proceedings (2021) | Steinweg, Florian Mikitisin, Adrian Peela, Agastya Cornel, Daniel Janitzky, Thomas L. M. Schwedt, A. Gutierrez Guzman, Francisco Gerardo Antonio Broeckmann, Christoph Mayer, J. Jacobs, Georg |
Towards a data-driven assistance system for operating segment erectors in tunnel boring machines Contribution to a book, Contribution to a conference proceedings (2021) | Zhou, Hans Aoyang (Corresponding author) Gannouni, Aymen Gentz, Christian Robert Maria Trondle, Johannes Neumann, Stephan Abdelrazeq, Anas Jacobs, Georg Hees, Frank (Last author) |
Integration of Production and Cost Models in Model-Based Product Development Journal Article (2021) | Spütz, Kathrin (Corresponding author) Jacobs, Georg Konrad, Christian Wyrwich, Christian Johannes |
Investigation of Dynamic Loads in Wind Turbine Drive Trains Due to Grid and Power Converter Faults Contribution to a book, Journal Article (2021) | Röder, Julian (Corresponding author) Jacobs, Georg Duda, Tobias Philipp Roman Bosse, Dennis Herzog, Fabian |
Function-Oriented Model-Based Product Development Contribution to a book (2021) | Jacobs, Georg Konrad, Christian Berroth, Joerg Karl Zerwas, Thilo Höpfner, Gregor Spütz, Kathrin |
Towards Holistic System Models Including Domain-Specific Simulation Models Based on SysML Journal Article (2021) | Zhang, Yizhe (Corresponding author) Höpfner, Gregor Berroth, Joerg Karl Pasch, Gerwin Jacobs, Georg |
Daten von Land- und Baumaschinen gewinnbringend nutzen : Analyse derzeitiger Monetarisierungsmechanismen und Handlungsempfehlungen für die Zukunft Contribution to a book (2021) | Lehmann, Benjamin Felix (Corresponding author) Jacobs, Georg Habermehl, Christian Gentz, Christian Robert Maria Neumann, Stephan |
Integration von Produktportfolios in die funktionsorientierte modellbasierte Systementwicklung Contribution to a conference proceedings (2021) | Wyrwich, Christian Johannes Jacobs, Georg Spütz, Kathrin Zerwas, Thilo Konrad, Christian |
A Combined Experimental and Atomistic Investigation of PTFE Double Transfer Film Formation and Lubrication in Rolling Point Contacts Journal Article (2021) | von Goeldel, Stephan Michael Eike (Corresponding author) Reichenbach, Thomas König, Florian Mayrhofer, Leonhard Moras, Gianpietro Jacobs, Georg Moseler, Michael (Corresponding author) |
County Clustering with Bioenergy as Flexible Power Unit in a Renewable Energy System Contribution to a book, Journal Article (2021) | Stößel, Laura Deborah (Corresponding author) Poddie, Leila Spratte, Tobias Schelenz, Ralf Jacobs, Georg |
Model-Based Estimation of the Strength of Laser-Based Plastic-Metal Joints Using Finite Element Microstructure Models and Regression Models Contribution to a book, Journal Article (2021) | Berges, Julius Moritz (Corresponding author) van der Straeten, Kira Martina Jacobs, Georg Berroth, Joerg Karl Gillner, Arnold |
Investigation of Tribological Behavior of Lubricating Greases Composed of Different Bio-Based Polymer Thickeners Contribution to a book, Journal Article (2021) | Vafaei, Seyedmohammad (Corresponding author) Fischer, Dennis Jopen, Max Jacobs, Georg König, Florian Weberskirch, Ralf |
On magnetization deviations as the dominant cause for vibration harmonics in the spectrum of a PMSM drive Journal Article (2021) | Jaeger, Markus (Corresponding author) Drichel, Pascal (Corresponding author) Schröder, Michael Berroth, Joerg Karl Jacobs, Georg Hameyer, Kay |
Influence of temperature on wear performance of greases in rolling bearings Journal Article (2021) | Rosenkranz, Laura Richter, Silvia Jacobs, Georg Mikitisin, Adrian Mayer, Joachim Stratmann, Andreas König, Florian |
Methodology for the Concept Design of Locally Reinforced Composites Journal Article (2021) | Berges, Julius Moritz (Corresponding author) Jacobs, Georg Stein, Sebastian Andreas Sprehe, Jonathan |
Model based systems engineering as enabler for rapid engineering change management Contribution to a book, Contribution to a conference proceedings, Journal Article (2021) | Meißner, Maximilian Jacobs, Georg Jagla, Patrick Karol Sprehe, Jonathan |
Model based systems engineering as enabler for rapid engineering change management Contribution to a conference proceedings, Journal Article (2021) | Meißner, Maximilian (Corresponding author) Jacobs, Georg Jagla, Patrick Karol Sprehe, Jonathan |
Identification of dependencies between product parameters and process stakeholders Contribution to a book, Contribution to a conference proceedings, Journal Article (2021) | Riedel, Ricarda (Corresponding author) Jacobs, Georg Wyrwich, Fabian Johannes Siebrecht, Justus |
Identification of dependencies between product parameters and process stakeholders Contribution to a conference proceedings, Journal Article (2021) | Riedel, Ricarda (Corresponding author) Jacobs, Georg Wyrwich, Fabian Johannes Siebrecht, Justus |
Using SysML to Support Impact Analysis on Structural Dynamics Simulation Models Contribution to a book, Contribution to a conference proceedings, Journal Article (2021) | Jagla, Patrick Karol (Corresponding author) Jacobs, Georg Siebrecht, Justus Wischmann, Stefan Tobias Sprehe, Jonathan |
Correlation-Based Transfer Path Analysis for Brake System-Induced Interfering Noise in the Vehicle Interior Journal Article (2021) | Drichel, Pascal Jacobs, Georg Wegerhoff, Matthias Stegmann, Philippe |
Influence of Model Detail Level on the Prognosis Quality of the Perceived Sound of an Electrified Passenger Car Powertrain Contribution to a book, Contribution to a conference proceedings (2021) | Drichel, Pascal (Corresponding author) Jaeger, Markus (Corresponding author) Möller-Giebeler, Mark (Corresponding author) Berroth, Joerg Karl Schröder, Marc Behler, Gottfried Kurt Jacobs, Georg Hameyer, Kay Vorländer, Michael |
Fault detection for sliding bearings using acoustic emission signals and machine learning methods Contribution to a book, Contribution to a conference proceedings (2021) | König, Florian (Corresponding author) Jacobs, Georg Stratmann, Andreas Cornel, Daniel |
Why homogenization should be the averaging method of choice in hydrodynamic lubrication Journal Article (2021) | Rom, Christian Michael (Corresponding author) König, Florian Müller, Siegfried Jacobs, Georg |
Interlaboratory comparison : Round robin test for the damage reproduction of white etching crack in cylindrical roller thrust bearings Journal Article (2021) | Linzmayer, Martin (Corresponding author) Jacobs, Georg Sous, Christopher Gutierrez Guzman, Francisco Gerardo Antonio |
Using SysML to Support Impact Analysis on Structural Dynamics Simulation Models Contribution to a conference proceedings, Journal Article (2021) | Jagla, Patrick Karol (Corresponding author) Jacobs, Georg Siebrecht, Justus Wischmann, Stefan Tobias Sprehe, Jonathan |
Reducing cost uncertainty in the drivetrain design decision with a focus on the operational phase Journal Article (2021) | Harzendorf, Freia (Corresponding author) Schelenz, Ralf Jacobs, Georg |
Damage Diagnosis of Cardan Shafts in Mobile Mining Machines using Vibration Analysis Contribution to a book, Contribution to a conference proceedings (2021) | Golafshan, Reza (Corresponding author) Dascaliuc, Catalin Jacobs, Georg Roth, David Johannes Berroth, Joerg Karl Neumann, Stephan |
Optimization-based Component Sizing Method for Electrified Heavy-Duty Powertrain Concepts Contribution to a book, Contribution to a conference proceedings (2021) | Roth, David Johannes (Corresponding author) Habermehl, Christian Jacobs, Georg Neumann, Stephan Juretzki, Björn Bayer, D. |
Does laser surface texturing really have a negative impact on the fatigue lifetime of mechanical components? Journal Article (2021) | Hsu, Chia-Jui (Corresponding author) Stratmann, Andreas Medina, Simon Jacobs, Georg Mücklich, Frank Gachot, Carsten |
Early stage white etching crack identification using artificial neural networks Journal Article (2021) | Liu, Xiaodi Azzam, Baher Harzendorf, Freia (Corresponding author) Kolb, Johann Schelenz, Ralf Hameyer, Kay Jacobs, Georg |
Model-Based Design Workflows for Cyber-Physical Systems Applied to an Electric-Mechanical Coolant Pump Contribution to a book, Contribution to a conference proceedings (2021) | Höpfner, Gregor (Corresponding author) Jacobs, Georg Zerwas, Thilo Drave, Imke Helene Berroth, Joerg Karl Guist, Christian Rumpe, Bernhard Kohl, Jens |
Identification of relevant acoustic transfer paths for WT drivetrains with an operational transfer path analysis Journal Article (2021) | Schünemann, Wilhelm Franz Nikolaus (Corresponding author) Schelenz, Ralf Jacobs, Georg Vocaet, W. |
Integration of electromagnetic finite element models in a multibody simulation to evaluate vibrations in direct-drive generators Journal Article (2021) | Duda, Tobias Philipp Roman (Corresponding author) Mülder, Christoph Jacobs, Georg Hameyer, Kay Bosse, Dennis Cardaun, Martin |
Simulative investigation of ring creep on a planetary bearing of a wind turbine gearbox Journal Article (2021) | Gnauert, Jonas (Corresponding author) Schlüter, Felix Matthew Jacobs, Georg Bosse, Dennis Witter, Stefan |
Method to determine the local load cycles of a blade bearing using flexible multi-body simulation Journal Article (2021) | Leupold, Samuel Gotthard Herrmann (Corresponding author) Schelenz, Ralf Jacobs, Georg |
Method for airborne measurement of the spatial wind speed distribution above complex terrain Journal Article (2021) | Ingenhorst, Christian (Corresponding author) Jacobs, Georg Stößel, Laura Deborah Schelenz, Ralf Juretzki, Björn |
Experimental and simulation-based analysis of asymmetrical spherical roller bearings as main bearings for wind turbines Journal Article (2021) | Loriemi, Amin (Corresponding author) Jacobs, Georg Reisch, Sebastian Bosse, Dennis Schröder, Tim |
Development of a wind turbine gearbox virtual load sensor using multibody simulation and artificial neural networks Journal Article (2021) | Azzam, Baher (Corresponding author) Schelenz, Ralf Roscher, Björn Baseer, Abdul Jacobs, Georg |
Simulative investigation of wind turbine gearbox loads during power converter fault Journal Article (2021) | Röder, Julian (Corresponding author) Jacobs, Georg Duda, Tobias Philipp Roman Bosse, Dennis Herzog, Fabian |
Development of test methodologies for experimental lifetime investigations of tidal turbines Journal Article (2021) | Rapp, Tobias (Corresponding author) Jacobs, Georg Bosse, Dennis Schröder, Tim Starzmann, Ralf Kaufmann, Nicholas Grassow, Matthias Scholl, Stefan Zweiffel, Maximilian |
Condition monitoring of roller bearings using acoustic emission Journal Article (2021) | Cornel, Daniel (Corresponding author) Gutiérrez Guzmán, Francisco Gerardo Antonio Jacobs, Georg Neumann, Stephan |
Model-Based Analysis of a Combined Heat and Power System Featuring a Hydrogen-Fired Gas Turbine With On-Site Hydrogen Production and Storage Journal Article (2021) | Bexten, Thomas (Corresponding author) Wirsum, Manfred Roscher, Björn Schelenz, Ralf Jacobs, Georg |
Methodology for the systematic design of conical plain bearings for use as main bearings in wind turbines Journal Article (2021) | Rolink, Amadeus Franziskus (Corresponding author) Jacobs, Georg Schröder, Tim Keller, Dennis Jakobs, Timm Bosse, Dennis Lang, Jochen Rainer Knoll, Gunter |
Investigation of lubricant supply in rolling point contacts under starved conditions using CFD simulations Contribution to a book, Contribution to a conference proceedings (2021) | Fischer, Dennis (Corresponding author) von Goeldel, Stephan Michael Eike Jacobs, Georg Stratmann, Andreas König, Florian |
Numerical investigation of effects on replenishment in rolling point contacts using CFD simulations Journal Article (2021) | Fischer, Dennis (Corresponding author) von Goeldel, Stephan Michael Eike Jacobs, Georg Stratmann, Andreas |
Evaluation of Parts for Additive Manufacturing utilizing System Models of AM Plants Contribution to a book, Contribution to a conference proceedings (2021) | Winkler, Marcel Frederik (Corresponding author) Jacobs, Georg Spütz, Kathrin Konrad, Christian |
Mechanical concept development using principle solution models Contribution to a book, Contribution to a conference proceedings (2021) | Zerwas, Thilo (Corresponding author) Jacobs, Georg Spütz, Kathrin Höpfner, Gregor Drave, Imke Helene Berroth, Joerg Karl Guist, Christian Konrad, Christian Rumpe, Bernhard Kohl, Jens |
Acoustic Optimization of a Power Take-off Gear Box Using Numerical Transfer Path Analysis Contribution to a book, Contribution to a conference proceedings (2021) | Wischmann, Stefan Tobias (Corresponding author) Pasch, Gerwin Berroth, Joerg Karl Jacobs, Georg |
Numerical Transfer Path Analysis for NVH System-Simulation Models Contribution to a book, Contribution to a conference proceedings (2021) | Pasch, Gerwin (Corresponding author) Jacobs, Georg Berroth, Joerg Karl |
Calculation of structure-borne sound in a direct drive wind turbine Journal Article (2021) | Cardaun, Martin (Corresponding author) Schelenz, Ralf Jacobs, Georg Duda, Tobias Philipp Roman |
Data-driven wear monitoring for sliding bearings using acoustic emission signals and long short-term memory neural networks Contribution to a conference proceedings, Journal Article (2021) | König, Florian (Corresponding author) Marheineke, Jonas Jacobs, Georg Sous, Christopher Zuo, Ming J. Tian, Zhigang |
Future economic perspective and potential revenue of non-subsidized wind turbines in Germany Journal Article (2021) | Blickwedel, Lucas (Corresponding author) Harzendorf, Freia Schelenz, Ralf Jacobs, Georg |
Machine learning based anomaly detection and classification of acoustic emission events for wear monitoring in sliding bearing systems Journal Article (2020) | König, Florian (Corresponding author) Sous, Christopher Ouald Chaib, Achraf Jacobs, Georg |
Post-testing measurement of freely movable and diffusible hydrogen in context of WEC formation at cylindrical roller thrust bearings from 100Cr6 Journal Article (2020) | Linzmayer, Martin (Corresponding author) Gutierrez Guzman, Francisco Gerardo Antonio Manke, Gregor Jacobs, Georg Sous, Christopher Pohl, Michael |
Numerical prediction of the frictional losses in sliding bearings during start-stop operation Journal Article (2020) | König, Florian (Corresponding author) Sous, Christopher Jacobs, Georg |
Systematische Nutzung von Modellen in künftigen Produktentwicklungsprozessen Journal Article (2020) | Jacobs, Georg Berroth, Joerg Karl Höpfner, Gregor Sprehe, Jonathan Konrad, Christian |
Transferability of component tests to systems based on the example of plain bearings in planetary gearboxes Contribution to a conference proceedings (2020) | Marheineke, Jonas Jacobs, Georg König, Florian Sous, Christopher |
Influence of Off-Centered Gear Load Distribution on Planetary Bearing Outer Ring Creep Journal Article (2020) | Schlüter, Felix Matthew (Corresponding author) Jacobs, Georg (Corresponding author) Bosse, Dennis (Corresponding author) Schröder, Tim (Corresponding author) |
Cage Loads of Wind Turbine Blade Bearing Contribution to a conference proceedings (2020) | Büscher, Max Karim (Corresponding author) Jacobs, Georg Leupold, Samuel Gotthard Herrmann Schelenz, Ralf |
Full-Size Test Bench Measurements and Validation of a Novel Conical sliding Bearing for the Main Shaft of Wind Turbines Journal Article (2020) | Schröder, Tim (Corresponding author) Rolink, Amadeus Franziskus Jacobs, Georg Bosse, Dennis |
Comparison of a Direct Drive Wind Turbine with and without LSS-Coupling Regarding Air Gap Displacement Contribution to a conference proceedings, Journal Article (2020) | Baseer, Abdul (Corresponding author) He, Y. Schelenz, Ralf Kari, A. Roscher, Björn Jacobs, Georg |
Abschlussbericht: Erweiterte Planetenradlagerauslegung bei Getrieben von Windenergieanlagen (WEA) - PlaBeD - Planetary Bearing Design Report (2020) | Schlüter, Felix Matthew Jacobs, Georg Bosse, Dennis Vriesen, Johannes W. Walter, Matthias |
Model-Based Analysis of a Combined Heat and Power System Featuring a Hydrogen-Fired Gas Turbine With On-Site Hydrogen Production and Storage Contribution to a book, Contribution to a conference proceedings (2020) | Bexten, Thomas Wirsum, Manfred Roscher, Björn Schelenz, Ralf Jacobs, Georg |
Impact of fiber versus steel ropes on the lifetime of crane winches Journal Article (2020) | Mohamed, Mohamed Yousri Abdelmeguid (Corresponding author) Jacobs, Georg (Corresponding author) Neumann, Stephan (Corresponding author) |
Investigation of the individual load distribution of a blade bearing test rig by means of finite element simulation Contribution to a conference proceedings, Journal Article (2020) | Leupold, Samuel Gotthard Herrmann (Corresponding author) Schelenz, Ralf Jacobs, Georg |
Cage Loads of Wind Turbine Blade Bearing Contribution to a conference proceedings, Journal Article (2020) | Büscher, Max Karim (Corresponding author) Leupold, Samuel Gotthard Herrmann Schelenz, Ralf Jacobs, Georg |
Multicriterial Evaluation of Renewable Energy Expansion Projects at Municipal Level for the Available Biomass Potential Contribution to a book, Journal Article (2020) | Blickwedel, Lucas (Corresponding author) Stößel, Laura Deborah Schelenz, Ralf Jacobs, Georg |
NVH System Simulation of a Tractor with Hydrostatic-Mechanical Power Split Transmission Journal Article (2020) | Pasch, Gerwin (Corresponding author) Jacobs, Georg Berroth, Joerg Karl |
Corrigendum to : Correlation of Planetary Bearing Outer RingCreep and Gear Load Distribution in a Full-Size Wind Turbine Report (2020) | Schlüter, Felix Matthew (Corresponding author) Jacobs, Georg Bosse, Dennis Brügge, Thilo Schlegel, Felix |
Influence of global and local process gas shielding on surface topography in laser micro polishing (LμP) of stainless steel 410 Journal Article (2020) | Temmler, A. (Corresponding author) Ross, I. Luo, J. Jacobs, Georg Schleifenbaum, Johannes Henrich |
Model approach for electromagnetically excited mechanical vibrations in direct-drive wind turbines Contribution to a conference proceedings, Journal Article (2020) | Mülder, Christoph (Corresponding author) Duda, Tobias Philipp Roman (Corresponding author) Jacobs, Georg Hameyer, Kay |
Modeling Mechanical Functional Architectures in SysML Contribution to a book, Contribution to a conference proceedings (2020) | Drave, Imke Helene Rumpe, Bernhard Wortmann, Andreas Berroth, Joerg Karl Höpfner, Gregor Jacobs, Georg Spütz, Kathrin Zerwas, Thilo Guist, Christian Kohl, Jens |
Estimation of Internal Gearbox Loads for Condition Monitoring in Wind Turbines Based on Physical Modeling Contribution to a conference proceedings, Journal Article (2020) | Pagitsch, Michael (Corresponding author) Jacobs, Georg Bosse, Dennis Duda, Tobias Philipp Roman |
Investigation of the load distribution on a planetary carrier bearing of a wind turbine gearbox to identify trigger for ring creep Contribution to a conference proceedings (2020) | Gnauert, Jonas Jacobs, Georg Krause, Alexander Wilhelm Bosse, Dennis |
Impact of Carrier Position and Surrounding Stiffness on Planet Carrier Bearing Loads Contribution to a conference proceedings, Journal Article (2020) | Krause, Alexander Wilhelm (Corresponding author) Gnauert, Jonas Jacobs, Georg Bosse, Dennis |
Influence of Drivetrain Hybridization on Transmission Lifetime Contribution to a book, Journal Article (2020) | Habermehl, Christian (Corresponding author) Jacobs, Georg Neumann, Stephan Weißenfels, Kevin |
Simulative investigation of the load propagation in a wind turbine drive train during a power converter fault Contribution to a conference proceedings, Journal Article (2020) | Röder, Julian (Corresponding author) Jacobs, Georg Duda, Tobias Philipp Roman Bosse, Dennis |
Koppelung von KI-Methoden und AVL EXCITE™ Power Unit zur Verschleißprognose von Gleitlagern Contribution to a conference proceedings (2020) | König, Florian Jacobs, Georg Sous, Christopher |
Machine Learning based condition monitoring and anomaly detection for wear lifetime prediction of journal bearing drivetrains Contribution to a conference proceedings (2020) | König, Florian Jacobs, Georg Ouald Chaib, Achraf Sous, Christopher |
Improvement of the pitch bearing load distribution by shape-optimized stiffening plates Contribution to a conference proceedings, Journal Article (2020) | Loriemi, Amin (Corresponding author) Jacobs, Georg Bosse, Dennis Zweiffel, Maximilian |
Feasibility study for the use of hydrodynamic plain bearings with balancing support characteristics as main bearing in wind turbines Contribution to a conference proceedings, Journal Article (2020) | Rolink, Amadeus Franziskus (Corresponding author) Schröder, Tim (Corresponding author) Jacobs, Georg Bosse, Dennis Hölzl, Johannes (Corresponding author) Bergmann, Philipp (Corresponding author) |
Wirkungsgrenzen des Verschleißschutzes verschiedener Schmierfettformulierungen in Wälzlagern Book, Report (2020) | Rosenkranz, Laura Jacobs, Georg Stratmann, Andreas Mikitisin, Adrian Mayer, Joachim Richter, Silvia |
Design study for a multicomponent transducer for wind turbine test benches Journal Article (2020) | Gnauert, Jonas (Corresponding author) Jacobs, Georg Kock, Stefan Bosse, Dennis Janik, Benjamin |
Managing knowledge and parameter dependencies with MBSE in textile product development processes Contribution to a conference proceedings, Journal Article (2020) | Riedel, Ricarda (Corresponding author) Jacobs, Georg Konrad, Christian Singh, Rahul Sprehe, Jonathan |
Thermally sprayed coatings for highly stressed sliding bearings Journal Article (2020) | Bobzin, Kirsten Wietheger, Wolfgang (Corresponding author) Jacobs, Georg Bosse, Dennis Schröder, Tim Rolink, Amadeus Franziskus |
Verzahnungsmodellierung für Systemsimulation - Abschlussbericht Report (2020) | Andary, Faysal Jacobs, Georg Zalfen, Moritz Johannes Wischmann, Stefan Tobias Berroth, Joerg Karl |
Schlussbericht DUETT - Diesel-Hybridfahrzeuge für eine umweltbewusste Mobilität: Eine vernetzte Systementwicklung in physischer und virtueller Umgebung Report (2020) | Habermehl, Christian Jacobs, Georg Neumann, Stephan |
A modeling method for gear transmission efficiency in transient operating conditions Journal Article (2020) | Habermehl, Christian (Corresponding author) Jacobs, Georg Neumann, Stephan |
Availability Increase of Mobile Machinery through Condition Prognosis Journal Article (2020) | Habermehl, Christian (Corresponding author) Jacobs, Georg (Corresponding author) Neumann, Stephan Lehmann, Benjamin Felix |
Verfügbarkeitssteigerung mobiler Arbeitsmaschinen durch Zustandsprognose Journal Article (2020) | Habermehl, Christian (Corresponding author) Jacobs, Georg Neumann, Stephan Lehmann, Benjamin Felix |
Customer specific compatibility matrices for functional integral product architectures Contribution to a conference proceedings, Journal Article (2020) | Siebrecht, Justus (Corresponding author) Jacobs, Georg Konrad, Christian Wyrwich, Christian Johannes Schäfer, W. |
Model-based product configuration of high variety product portfolios Contribution to a conference proceedings, Journal Article (2020) | Wyrwich, Christian Johannes (Corresponding author) Jacobs, Georg Siebrecht, Justus Konrad, Christian |
Schlussbericht ProMaschinenDaten - Verfügbarkeitssteigerung mobiler Arbeitsmaschinen durch Prognose des Maschinenzustands auf Basis globaler Daten Report (2020) | Roth, David Johannes Jacobs, Georg Habermehl, Christian Golafshan, Reza Keller, Dennis Lehmann, Benjamin Felix Neumann, Stephan |
Schlussbericht: Dezentrale kompakte Hydraulikversorgung durch High-Speed-Komponenten Report (2020) | Roth, David Johannes Pietrzyk, Tobias Jacobs, Georg Schmitz, Katharina Neumann, Stephan |
Die Kopplung elektrotechnischer und strukturdynamischer Domänen zu einem NVH-Systemmodell eines elektrischen Antriebsstrangs Journal Article (2020) | Jaeger, Markus (Corresponding author) Drichel, Pascal Schröder, Michael Berroth, Joerg Karl Jacobs, Georg Hameyer, Kay |
Elektrisch-Mechanisch leistungsverzweigte Getriebe (eLVG) als modularer Baukasten für mobile Arbeitsmaschinen und -geräte : gemeinschaftlicher Schlussbericht zum Vorhaben : Berichtszeitraum: 01.08.2016-31.07.2019 Report (2020) | Jacobs, Georg (Responsible party) Gentz, Christian Robert Maria (Responsible party) Wyrwich, Christian Johannes (Responsible party) |
Investigation of the tire in-plane vibration property using an improved ring model Journal Article (2020) | Yang, Jianing (Corresponding author) Jacobs, Georg Kramer, Achim Drichel, Pascal Liu, Chenxi |
Application of data mining for the identification of parts for additive manufacturing Contribution to a conference proceedings (2020) | Winkler, Marcel Frederik (Corresponding author) Jacobs, Georg (Corresponding author) Stürmer, Stefan (Corresponding author) Konrad, Christian (Corresponding author) |
Revealing the interface nature of ZDDP tribofilm by X-ray photoelectron spectroscopy and atom probe tomography Journal Article (2020) | Hsu, Chia-Jui (Corresponding author) Barrirero, Jenifer Merz, Rolf Stratmann, Andreas Aboulfadl, Hisham Jacobs, Georg Kopnarski, Michael Mücklich, Frank Gachot, Carsten |
Correlation of Planetary Bearing Outer Ring Creep and Gear Load Distribution in a Full-Size Wind Turbine Contribution to a conference proceedings, Journal Article (2020) | Schlüter, Felix Matthew (Corresponding author) Jacobs, Georg Bosse, Dennis Brügge, Thilo Schlegel, Felix |
Remaining Useful Life Determination for Wind Turbines Contribution to a conference proceedings, Journal Article (2020) | Pagitsch, Michael (Corresponding author) Jacobs, Georg Bosse, Dennis |
Development of a Low-Friction Radial Shaft Seal : Using CFD Simulations to Optimise the Microstructured Sealing Lip Contribution to a book, Journal Article (2020) | Keller, Dennis (Corresponding author) Jacobs, Georg Neumann, Stephan |
Suitability of Wear Coefficients from Tribometer Testing for Wear Prediction in Sliding Bearings Contribution to a book, Contribution to a conference proceedings (2020) | König, Florian Georgiou, Emmanuel Drees, Dirk Jacobs, Georg Sous, Christopher |
Entwicklung einer Prüfmethode zur Bewertung der Energieeffizienz von Radladern : Schlussbericht zum IGF-Vorhaben Nr. 19088N1 : Berichtszeitraum 01.01.2017 - 31.07.2019 : Forschungsvereinigung: Forschungskuratorium Maschinenbau e.V., Lyoner Straße 18, 60528 Frankfurt/Main, Forschungseinrichtung(en): Institut für Maschinenelemente und Systementwicklung, Schinkelstraße 10, 52062 Aachen Report (2020) | Gentz, Christian Robert Maria Jacobs, Georg Neumann, Stephan |
Effect of thickener type in lubricating greases on the film formation in EHD contacts Contribution to a book, Contribution to a conference proceedings (2020) | Fischer, Dennis (Corresponding author) Jacobs, Georg Stratmann, Andreas |
Load Estimation for Condition Monitoring in Wind Turbines Based on Physical Modeling Conference Presentation (2020) | Pagitsch, Michael Jacobs, Georg Bosse, Dennis Duda, Tobias Philipp Roman |
Aeroelastic response of a multi-megawatt upwind horizontal axis wind turbine (HAWT) based on fluid-structure interaction simulation Journal Article (2020) | Shkara, Yasir (Corresponding author) Cardaun, Martin Schelenz, Ralf Jacobs, Georg |
An energetic approach for the prognosis of thermally induced white etching layers in bearing steel 100CrMn6 Journal Article (2019) | Gutierrez Guzman, Francisco Gerardo Antonio (Corresponding author) Sous, Christopher van Lier, Hermann Jacobs, Georg |
Design of a High Speed Internal Gear Pump to Increase the Power Density of Electro Hydraulic Actuators (EHA) in Mobile Applications Contribution to a book, Contribution to a conference proceedings (2019) | Pietrzyk, Tobias Roth, David Johannes Jacobs, Georg (Corresponding author) Schmitz, Katharina (Corresponding author) |
Effect of single- and multi-scale surface patterns on the frictional performance of journal bearings : A numerical study Journal Article (2019) | König, Florian (Corresponding author) Rosenkranz, Andreas Grützmacher, Philipp G. Mücklich, Frank Jacobs, Georg |
Acoustic response of roller bearings under critical operating conditions Contribution to a book, Contribution to a conference proceedings (2020) | Cornel, Daniel (Corresponding author) Gutierrez Guzman, Francisco Gerardo Antonio Jacobs, Georg Neumann, Stephan |
FutureSite - Test Center for the Development of Tomorrow's Construction Site Journal Article (2019) | Odenthal, Jonas (Corresponding author) Jacobs, Georg Kramer, Achim Lipp, Johannes |
Erweiterung der Simulationsmöglichkeiten für maschinenakustische Untersuchungen an E-Motive-Antrieben im Kontext zur Fahrzeugstruktur Report (2019) | Jaeger, Markus Drichel, Pascal Müller-Giebeler, Mark Behrang Schröder, Michael Berroth, Joerg Karl Behler, Gottfried Kurt Hameyer, Kay Jacobs, Georg Vorländer, Michael |
Load analysis of special operation conditions and implementation of derived load states in Bearing Robustness Test (BRT) Journal Article (2019) | Hirt, Andreas (Corresponding author) Jacobs, Georg Neumann, Stephan Kock, Stefan Bosse, Dennis |
Investigating the impact of wakes on single turbine availability Contribution to a book, Contribution to a conference proceedings, Journal Article (2019) | Roscher, Björn (Corresponding author) Redder, Florian Schelenz, Ralf Jacobs, Georg |
Analysis of transient elastohydrodynamic lubrication of point contact subjected to sinusoidal dynamic loads Contribution to a book, Contribution to a conference proceedings (2019) | Cupu, D. R. P. (Corresponding author) Stratmann, Andreas Jacobs, Georg |
FutureSite - Test Center for the Development of Tomorrow's Construction Site Preprint (2019) | Odenthal, Jonas (Corresponding author) Jacobs, Georg Kramer, Achim Lipp, Johannes |
FVA-Nr. 685 II Kupplungsstöße : Systemverhalten von Elastomerkupplungen unter stoßartiger Belastung Report (2019) | Rapp, Tobias Jacobs, Georg Berroth, Joerg Karl |
Development of a Wind Turbine Gearbox Virtual Sensor using Multibody Simulation and Artificial Neural Networks Poster (2019) | Azzam, Baher Baseer, Abdul Schelenz, Ralf Jacobs, Georg |
Risse auf Lagerringen : Ringversuch : Abschlussbericht : Forschungsvorhaben Nr. 707 : Ringversuch zur reproduzierbaren Erzeugung von Gefügeveränderungen in Wälzlagern mit Rissen als Folgeschaden Book, Report (2019) | Linzmayer, Martin Jacobs, Georg Sous, Christopher |
Risse auf Lagerringen : Wasserstoffdetektion : Abschlussbericht : Forschungsvorhaben Nr. 707 : Detektion von diffusiblem Wasserstoff in Hinblick auf Gefügeveränderungen in Wälzlagern mit Rissen als Folgeschaden Book, Report (2019) | Linzmayer, Martin Gutierrez Guzman, Francisco Gerardo Antonio Steinweg, Florian Özel, Mehmet Ozan Mikitisin, Adrian Manke, Georg Sous, Christopher Janitzky, Thomas L. M. Schwedt, Alexander Jacobs, Georg Broeckmann, Christoph Mayer, Joachim Pohl, Michael |
Electromechanical Simulation of a Direct-Drive Generator Considering Parasitic Magnetic Forces and External Loads Contribution to a book, Contribution to a conference proceedings (2019) | Duda, Tobias Philipp Roman Jacobs, Georg Bosse, Dennis |
Aktive mechanische Variation der Breitenlastverteilung einer WEA-Planetenradlagerung Contribution to a conference proceedings (2019) | Schlüter, Felix Matthew Jacobs, Georg Vriesen, Johannes W. Walter, Matthias Bosse, Dennis |
Einfluss der Schmierfettzusammensetzung auf den Schmierfilmaufbau im EHD-Kontakt : Abschlussbericht : FVA-Nr. 580-II Dünne Schmierfilme II Book, Report (2019) | Fischer, Dennis Jacobs, Georg Stratmann, Andreas |
Pattern Discovery in White Etching Crack Experimental Data Using Machine Learning Techniques Contribution to a book, Journal Article (2019) | Azzam, Baher (Corresponding author) Harzendorf, Freia Schelenz, Ralf Holweger, Walter Jacobs, Georg |
Multi-Domain Simulation for the Assessment of the NVH Behaviour of a Tractor with Hydrostatic-Mechanical Power Split Transmission Contribution to a book, Contribution to a conference proceedings (2019) | Pasch, Gerwin Jacobs, Georg Höpfner, Gregor Berroth, Joerg Karl |
Modellbildung und Analyse des NVH-Verhaltens moderner Antriebsstrangkonzepte am Beispiel eines elektrifizierten PKW sowie eines Traktors Contribution to a book, Contribution to a conference proceedings (2019) | Höpfner, Gregor Jacobs, Georg Pasch, Gerwin Drichel, Pascal Berroth, Joerg Karl |
Investigation of Modelling Depths for an Electromechanical Simulation of a Direct-Drive Generator Considering Parasitic Airgap Forces and External Loads Contribution to a conference proceedings, Journal Article (2019) | Duda, Tobias Philipp Roman (Corresponding author) Jacobs, Georg Bosse, Dennis |
Die Reibung dynamischer Elastomerdichtungen reduzieren : Simulationsgestützte Optimierung der mikrostrukturierten Dichtfläche Journal Article (2019) | Keller, Dennis Jacobs, Georg Kramer, Achim Neumann, Stephan |
Einsatzgrenzen von Gleitlagern im Bereich der Mischreibung Contribution to a book, Contribution to a conference proceedings (2019) | König, Florian Jacobs, Georg Sous, Christopher |
"FlexPad" - Innovative conical sliding bearing for the main shaft of wind turbines Contribution to a conference proceedings, Journal Article (2019) | Schröder, Tim (Corresponding author) Jacobs, Georg Rolink, Amadeus Franziskus Bosse, Dennis |
Wear prediction in sliding bearings subjected to start-stop operation Contribution to a conference proceedings (2019) | König, Florian Jacobs, Georg Sous, Christopher |
Electric mechanic power split PTO for implements Contribution to a book, Contribution to a conference proceedings (2019) | Gentz, Christian Robert Maria Jacobs, Georg Wyrwich, Christian Johannes Münch, Jakob Marsel, Matthias Lindner, Mirko Herlitzius, Thomas |
FutureSite - Testcenter zur Entwicklung der Baustelle von morgen Journal Article (2019) | Odenthal, Jonas Jacobs, Georg Kramer, Achim Lipp, Johannes |
Temperaturabhängigkeit des Verschleißschutzes von fettgeschmierten Wälzlagern Contribution to a book, Contribution to a conference proceedings (2019) | Rosenkranz, Laura Jacobs, Georg Mikitisin, Adrian Richter, Silvia Stratmann, Andreas Mayer, Joachim |
Effect of over rolling frequency on the film formation in grease lubricated EHD contacts under starved conditions Contribution to a book, Contribution to a conference proceedings (2019) | Mues, Helko (Corresponding author) Jacobs, Georg (Corresponding author) Fischer, Dennis (Corresponding author) Stratmann, Andreas (Corresponding author) |
Effect of over rolling frequency on the film formation in grease lubricated EHD contacts under starved conditions Abstract, Journal Article (2019) | Mues, Helko Fischer, Dennis Jacobs, Georg Stratmann, Andreas |
Branchenübergreifendes Benchmarking von variantenreichen Produktportfolios auf Basis von Produktstrukturen Contribution to a book, Contribution to a conference proceedings (2019) | Wyrwich, Christian Johannes Jacobs, Georg |
White Etching Crack Bearing Failure : Identification of High Risk Lubricant Compounds using Artificial Neural Networks Contribution to a book, Contribution to a conference proceedings (2019) | Azzam, Baher Harzendorf, Freia Schelenz, Ralf Jacobs, Georg Holweger, Walter |
Decentralized Compact Hydraulic Power Supply by High Speed Components Journal Article (2019) | Roth, David Johannes (Corresponding author) Jacobs, Georg Pietrzyk, Tobias Schmitz, Katharina |
Design study for a multi-component transducer for wind turbine test benches Contribution to a book, Contribution to a conference proceedings (2019) | Gnauert, Jonas Jacobs, Georg Kock, Stefan Bosse, Dennis Janik, Benjamin |
Enabling complexity management through merging business process modeling with MBSE Contribution to a conference proceedings, Journal Article (2019) | Konrad, Christian (Corresponding author) Jacobs, Georg Rasor, Rik Riedel, Ricarda Katzwinkel, Tim Siebrecht, Justus |
Mit elektrischem Antrieb und modellbasierter Systemanalyse nahezu lautlos in die Zukunft Journal Article (2019) | Drichel, Pascal (Corresponding author) Jaeger, Markus Müller-Giebeler, Mark Behrang Jacobs, Georg Hameyer, Kay Vorländer, Michael |
FE8 type laboratory testing of white etching crack (WEC) bearing failure mode in 100Cr6 Journal Article (2019) | Danielsen, H. K. (Corresponding author) Gutierrez Guzman, Francisco Gerardo Antonio Muskulus, M. Rasmussen, B. H. Shirani, M. Cornel, Daniel Sauvage, Paul Wu, J. Petrov, R. Jacobs, Georg |
NVH-Systemanalyse und -simulation am Beispiel eines E-Fahrzeug-Antriebsstrangs Conference Presentation (2019) | Höpfner, Gregor Jacobs, Georg Drichel, Pascal Berroth, Joerg Karl |
Reducing cost uncertainty in the drivetrain design decision with a focus on the operational phase Conference Presentation (2019) | Harzendorf, Freia Jacobs, Georg Schelenz, Ralf |
Real scale test of a white etching crack condition monitoring system Conference Presentation (2019) | Barteldes, Soeren Bley, Torsten Harzendorf, Freia Schelenz, Ralf Jacobs, Georg Holweger, Walter Esmaeili, Kamran |
Development of a low-friction radial shaft seal: Using CFD simulations to optimise the microstructured sealing lip Abstract, Contribution to a book, Contribution to a conference proceedings (2019) | Keller, Dennis Jacobs, Georg Kramer, Achim |
Interconnected Drivetrain Development in a Physical and Virtual Environment Journal Article (2019) | Habermehl, Christian (Corresponding author) Kramer, Achim Jacobs, Georg |
Vernetzte Antriebsstrangentwicklung in physischer und virtueller Umgebung Journal Article (2019) | Habermehl, Christian (Corresponding author) Kramer, Achim Jacobs, Georg |
Robustheitstest für Getriebewälzlagerungen in Windenergieanlagen Contribution to a book, Contribution to a conference proceedings (2019) | Oberdörfer, Sergej Jacobs, Georg Neumann, Stephan |
White Etching Crack Bearing Failure : Risk Classification of Lubricants and Identification of High Risk Lubricant Compounds using Random Forests and Support Vector Machines Conference Presentation (2019) | Azzam, Baher Harzendorf, Freia Schelenz, Ralf Holweger, Walter Jacobs, Georg |
Analysis of Wind-Turbine Main Bearing Loads Due to Constant Yaw Misalignments over a 20 Years Timespan Contribution to a book, Journal Article (2019) | Cardaun, Martin (Corresponding author) Roscher, Björn Schelenz, Ralf Jacobs, Georg |
Load Duration Distribution based on SCADA history Contribution to a book, Contribution to a conference proceedings (2019) | Werkmeister, Alexander Torsten Jacobs, Georg Roscher, Björn Schelenz, Ralf |
Validation of MBS modeling methods to calculate bearing and tooth loads in the planetary gear stage of a wind turbine Contribution to a book, Contribution to a conference proceedings (2019) | Matzke, Daniel Jacobs, Georg Schelenz, Ralf |
Hydrodynamic Plain Bearings for the Main Bearing Arrangement of a 6 MW Offshore Wind Turbine Contribution to a book, Contribution to a conference proceedings (2019) | Kasiri, Azadeh Blumberg, Andreas Schelenz, Ralf Jacobs, Georg |
Electromechanical Simulation of a Direct-Drive Generator Considering Parasitic Magnetic Forces and External Loads Conference Presentation (2019) | Duda, Tobias Philipp Roman Jacobs, Georg Bosse, Dennis |
Mischreibungsbetrieb von Gleitlagern : Einfluss der Oberflächentopographie auf Reibung und Verschleiß Contribution to a book, Contribution to a conference proceedings (2019) | Sous, Christopher König, Florian Jacobs, Georg |
Methodik zur modellbasierten NVH-Analyse von Traktoren mit hydrostatisch-mechanischen Leistungsverzweigungsgetrieben Contribution to a book, Contribution to a conference proceedings (2019) | Pasch, Gerwin Jacobs, Georg Höpfner, Gregor Berroth, Joerg Karl |
Detektion von diffusiblem Wasserstoff im Zusammenhang mit der Entstehung und Ausbreitung von WEC Contribution to a book, Contribution to a conference proceedings (2019) | Linzmayer, Martin Jacobs, Georg Gutierrez Guzman, Francisco Gerardo Antonio Sous, Christopher Pohl, Michael |
Sensordatenintegration in ein modellbasiertes Anforderungsmanagement Contribution to a book, Contribution to a conference proceedings (2019) | Konrad, Christian Katzwinkel, Tim Jacobs, Georg |
A Benchmark Study for MEMS-Sensors-Based Fault Diagnosis for Rolling Bearings Contribution to a book, Contribution to a conference proceedings (2019) | Golafshan, Reza Jacobs, Georg Andary, Faysal Berroth, Joerg Karl |
Entwicklung eines elektrisch-mechanisch leistungsverzweigten Getriebes als Baukastensystem für landwirtschaftliche Anbaugeräte Contribution to a book, Contribution to a conference proceedings (2019) | Gentz, Christian Robert Maria Jacobs, Georg Kramer, Achim Wyrwich, Christian Johannes |
Bauraumreduktion durch Drehzahlanhebung - Einsatz von High-Speed-Antrieben in elektrohydraulischen Linearaktuatoren für mobile Anwendungen Contribution to a book, Contribution to a conference proceedings (2019) | Roth, David Johannes Jacobs, Georg Kramer, Achim Krech, Max Pietrzyk, Tobias (Corresponding author) Schmitz, Katharina |
Entwicklung und Auslegung einer elektro-hydraulischen Achse mit einem 48 V High-Speed-Antrieb zur Dezentralisierung der Arbeitshydraulik eines Kompaktbaggers Contribution to a book, Contribution to a conference proceedings (2019) | Pietrzyk, Tobias (Corresponding author) Schmitz, Katharina Lee, Seong-Ryeol Roth, David Johannes Jacobs, Georg |
Dezentrale kompakte Hydraulikversorgung durch High Speed-Komponenten Journal Article (2019) | Roth, David Johannes (Corresponding author) Jacobs, Georg Pietrzyk, Tobias Schmitz, Katharina |
Determination of a Load Spectrum for a Robustness Test of WT Gearbox-Bearings Contribution to a book, Contribution to a conference proceedings (2019) | Oberdörfer, Sergej Jacobs, Georg Kock, Stefan Neumann, Stephan Bosse, Dennis |
An Energy-Based Load Distribution Approach for the Application of Gear Mesh Stiffness on Elastic Bodies Journal Article (2019) | Andary, Faysal (Corresponding author) Berroth, Joerg Karl Jacobs, Georg |
Precise MN∙m Torque Measurement in Wind Turbine Test Benches Report (2019) | Kock, Stefan Jacobs, Georg Bosse, Dennis |
CWD 2019 : Conference for Wind Power Drives (CWD) : Aachen, 12th & 13th of March : conference proceedings / publisher : Univ.-Prof. Dr.-Ing. Dirk Abel (Institut für Regelungstechnik), Univ.-Prof. Dr.-Ing. Christian Brecher (Werkzeugmaschinenlabor der RWTH Aachen), Univ.-Prof. Dr. ir. Rik W. De Doncker (Power Generation and Storage Systems), Univ.-Prof. Dr.-Ing. Dr. h.c. Kay Hameyer (Institut für elektrische Maschinen), Univ.-Prof. Dr.-Ing. Georg Jacobs (Chair for Wind Power Drives), Univ.-Prof. Dr.-Ing. Antonello Monti (Automation of Complex Power Systems), Univ.-Prof. Dr.-Ing. Wolfgang Schröder (Aerodynamisches Institut), Andreas Hirt (Chair for Wind Power Drives) ; CWD - Center for Wind Power Drives, RWTH Aachen University Book, Proceedings (2019) | Abel, Dirk (Editor) Brecher, Christian (Editor) de Doncker, Rik W. (Editor) Hameyer, Kay (Editor) Jacobs, Georg (Editor) Monti, Antonello (Editor) Schröder, Wolfgang (Editor) Hirt, Andreas (Editor) |
Conference for Wind Power Drives, CWD 2019 : Aachen 12th-13th of March : conference proceedings, Aachen, 12th-13th of March 2019 Book, Proceedings (2019) | Abel, Dirk (Editor) Brecher, Christian (Editor) de Doncker, Rik W. (Editor) Hameyer, Kay (Editor) Jacobs, Georg (Editor) Monti, Antonello (Editor) Schröder, Wolfgang (Editor) Hirt, Andreas (Editor) |
A multiscale-approach for wear prediction in journal bearing systems : from wearing-in towards steady-state wear Contribution to a conference proceedings, Journal Article (2019) | König, Florian (Corresponding author) Ouald Chaib, Achraf Jacobs, Georg Sous, Christopher |
Antriebstechnisches Kolloquium : ATK 2019, Aachen 12.-13. März : Tagungsband Book, Proceedings (2019) | Jacobs, Georg (Editor) Marheineke, Jonas (Editor) |
Test method for local load analysis of planetary bearings Contribution to a book, Contribution to a conference proceedings (2019) | Kock, Stefan Jacobs, Georg Neumann, Stephan Bosse, Dennis Sedlatschek, Tobias |
Study of Direct Drive Turbine Concept with respect to Air Gap Sensitivity by means of Multibody Simulation Contribution to a book, Contribution to a conference proceedings (2019) | Baseer, Abdul Jacobs, Georg Schelenz, Ralf Cardaun, Martin Duda, Tobias Philipp Roman |
The Impact of the Modelling Depth of Mechanical and Electrical Sub-Models on the Simulated Electrical Properties of Wind Turbines Contribution to a book, Contribution to a conference proceedings (2019) | Baseer, Abdul Müllner, Markus von den Hoff, Daniel Mülder, Christoph Jassmann, Uwe Schelenz, Ralf Jacobs, Georg Abel, Dirk |
Erprobung von thermisch gespritzten Schichtsystemen in Gleitlagerversuchen Contribution to a book, Contribution to a conference proceedings (2019) | Rolink, Amadeus Franziskus Jacobs, Georg Bosse, Dennis Schröder, Tim Bobzin, Kirsten Öte, Mehmet Königstein, Tim Denis Stefan Wietheger, Wolfgang |
Einfluss des Grundöltypes in Schmierfetten auf die Schmierfilmausbildung in EHD Kontakten Contribution to a book, Contribution to a conference proceedings (2019) | Fischer, Dennis Jacobs, Georg Stratmann, Andreas |
Modellierungsmethodik zur multiaxialen Abbildung des höherfrequenten Übertragungsverhaltens von Elastomerlagern in der NVH-Systemsimulation Contribution to a book, Contribution to a conference proceedings (2019) | Drichel, Pascal Jacobs, Georg Wischmann, Stefan Tobias Berroth, Joerg Karl |
A universal and extensible data model for operational data of wind turbines Contribution to a book, Contribution to a conference proceedings (2019) | Pagitsch, Michael (Corresponding author) Jacobs, Georg Bosse, Dennis |
Effect of over rolling frequency on the film formation in grease lubricated EHD contacts under starved conditions Journal Article (2019) | Fischer, Dennis (Corresponding author) Mues, Helko Jacobs, Georg Stratmann, Andreas |
3D X-ray computerized tomography of White Etching Cracks (WEC) Journal Article (2019) | Danielsen, H. K. (Corresponding author) Carrasco, A. J. Fæster, S. Dahl, K. V. Gutierrez Guzman, Francisco Gerardo Antonio Sauvage, Paul Jacobs, Georg |
Noise, vibration and harshness validation methodology for complex elastic multibody simulation models: With application to an electrified drive train Journal Article (2018) | Wegerhoff, Matthias (Corresponding author) Jacobs, Georg Drichel, Pascal |
New Material Concepts for Thermally Sprayed Hydrodynamic Bearings Journal Article (2019) | Bobzin, Kirsten Öte, Mehmet Königstein, Tim Denis Stefan Wietheger, Wolfgang (Corresponding author) Schröder, Tim Jacobs, Georg Bosse, Dennis |
Tribolayer formation during macro- and microscale cyclic contact Journal Article (2018) | Brinckmann, Steffen (Corresponding author) Stratmann, Andreas Dehm, Gerhard Jacobs, Georg |
Optimal Operation of a Gas Turbine Cogeneration Unit With Energy Storage for Wind Power System Integration Journal Article (2019) | Bexten, Thomas (Corresponding author) Wirsum, Manfred Roscher, Björn Schelenz, Ralf Jacobs, Georg Weintraub, Daniel Jeschke, Peter |
Sliding moment bearing as a main bearing in wind turbine generators Conference Presentation (2019) | Schröder, Tim Jacobs, Georg Bosse, Dennis |
Investigation of Rolling Bearing Condition Monitoring Techniques Based on Long Term Run-to-Failure Vibration Data Journal Article (2018) | Golafshan, Reza Jacobs, Georg Berroth, Joerg Karl |
Simulationsbasierte Prognose von Gleitlagerverschleiß Conference Presentation (2018) | König, Florian Jacobs, Georg Sous, Christopher |
Estimation of 1Hz Distribution based on 10min SCADA Data Conference Presentation (2018) | Roscher, Björn Werkmeister, Alexander Torsten Schelenz, Ralf Jacobs, Georg |
In-process integration of fibre optical sensors for structural condition monitoring of braided composite shaft Contribution to a conference proceedings (2018) | Bareiro, Oscar (Corresponding author) Janetzko-Preisler, Andreas Drichel, Pascal Ackermann, Philippe Schröder, Kai-Uwe Gries, Thomas Jacobs, Georg Schmitt, Robert H. |
Entwicklung eines elektrisch-leistungsverzweigten Anbaugeräteantriebs Contribution to a book, Contribution to a conference proceedings (2018) | Gentz, Christian Robert Maria Jacobs, Georg Kramer, Achim Wyrwich, Christian Johannes |
Efficient development by means of automated calibration of tractor control units Contribution to a book, Contribution to a conference proceedings (2018) | Körtgen, Christopher Morandi, G. Jacobs, Georg Kramer, Achim |
Strukturoptimierung und Modularisierung - geht das? Journal Article (2018) | Stein, Sebastian Andreas (Corresponding author) Jacobs, Georg Sprehe, Jonathan Bolk, Johannes |
Einfach ins Blaue oder methodisch ins Grüne? Contribution to a book, Journal Article (2018) | Kozlowski, Marian Jacobs, Georg Sprehe, Jonathan |
Towards a cohesive methodology for sustainable materials selection in multi-material systems Contribution to a book, Contribution to a conference proceedings (2018) | Kozlowski, Marian (Corresponding author) Jacobs, Georg Sprehe, Jonathan Stein, Sebastian Andreas Akram, Adeel |
Digitalisierung in der Windenergie - die nächste Stufe der Effizienz Journal Article (2018) | Pagitsch, Michael Jacobs, Georg Bosse, Dennis |
Friction Reduction of dynamic Elastomer Seals by Microstructuring of the Seal Sliding Surface Contribution to a book, Contribution to a conference proceedings (2018) | Keller, Dennis Jacobs, Georg Kramer, Achim Neumann, Stephan Paulkowski, D. Eifel, Stephan |
Wear prediction of journal bearings in start-stop operation Contribution to a book, Contribution to a conference proceedings (2018) | König, Florian Jacobs, Georg Sous, Christopher |
Simulation Method for the Characterisation of the Torque Transducers in MN·m range Contribution to a conference proceedings, Journal Article (2018) | Kock, Stefan (Corresponding author) Jacobs, Georg Bosse, Dennis Strangfeld, Florian |
Measurement uncertainty estimation of a novel torque transducer for wind turbine test benches Contribution to a conference proceedings, Journal Article (2018) | Gnauert, Jonas (Corresponding author) Jacobs, Georg Kock, Stefan Bosse, Dennis |
FVA 707 IV - Risse auf Lagerringen - Wasserstoffdetektion Contribution to a conference proceedings (2018) | Linzmayer, Martin Jacobs, Georg Gutierrez Guzman, Francisco Gerardo Antonio Sous, Christopher Steinweg, Florian Özel, Mehmet Ozan Janitzky, Thomas L. M. Broeckmann, Christoph Mikitisin, Adrian Schwedt, Alexander Mayer, Joachim Manke, Gregor Pohl, Michael |
Manufacturing cost : a critical evaluation criteria for new developments in wind turbine drivetrain technologies Contribution to a book, Contribution to a conference proceedings, Journal Article (2018) | Harzendorf, Freia (Corresponding author) Azzam, Baher Schelenz, Ralf Jacobs, Georg |
Reibungsreduzierung dynamischer Elastomerdichtungen durch die simulationsgestützte Optimierung der mikrostrukturierten Dichtfläche Contribution to a book, Contribution to a conference proceedings (2018) | Keller, Dennis Jacobs, Georg Kramer, Achim Neumann, Stephan |
Entwicklung der Betriebsstrategie eines elektrisch-mechanisch leistungsverzweigten Hybridantriebs für dieselbetriebene Nahverkehrszüge Contribution to a book, Contribution to a conference proceedings (2018) | Hoffmann, Hendrik Jacobs, Georg Kramer, Achim Pelger, Christian Martin Odenthal, Jonas |
Schädlicher Wälzlagerschlupf: thermische Werkstoffschäden durch schädlichen Wälzlagerschlupf : Forschungsvorhaben Nr. 663 II : Abschlussbericht II Book, Report (2018) | Gutierrez Guzman, Francisco Gerardo Antonio Jacobs, Georg Günther, Jonathan Burghardt, Gero |
Development of a Thick Plate Folding Mechanism as a Cover for a 3D printer Poster (2018) | Siebrecht, Justus (Corresponding author) Jacobs, Georg Dehn, Simon Michael Spütz, Kathrin Weigel, Chantal Denise (Corresponding author) Hoffmann, Susanne Buffart, Henri Trautz, Martin Paris, Jascha Norman Corves, Burkhard |
The effect of blade-tower interaction on the structure loading of multi megawatt horizontal axis wind turbine Contribution to a book, Contribution to a conference proceedings, Journal Article (2018) | Shkara, Yasir (Corresponding author) Schelenz, Ralf Jacobs, Georg |
Experimental and Model-based Analysis of the Force Transmission in a Rotor Bearing Support System Contribution to a book, Contribution to a conference proceedings, Journal Article (2018) | Reisch, Sebastian (Corresponding author) Jacobs, Georg Bosse, Dennis Loriemi, Amin |
Comparison of wind turbine loads inside a wake between engineering model and CFD calculation Contribution to a book, Contribution to a conference proceedings, Journal Article (2018) | Roscher, Björn (Corresponding author) Schelenz, Ralf Werkmeister, Alexander Torsten Shkara, Yasir Stößel, Laura Deborah Jacobs, Georg |
Validation of the gearbox load calculation of a wind turbine MBS model Contribution to a book, Contribution to a conference proceedings, Journal Article (2018) | Matzke, Daniel (Corresponding author) Schelenz, Ralf Reisch, Sebastian Roscher, Björn Jacobs, Georg Theling, Julian Anselm Schroers, Marius Gregor Löpenhaus, Christoph Brecher, Christian |
Multi-domain simulation for the assessment of the NVH-behavior of electric vehicles with special attention to the influence of rotor eccentricity Conference Presentation (2018) | Drichel, Pascal Müller-Giebeler, Mark Behrang Jaeger, Markus Berroth, Joerg Karl Jacobs, Georg Vorländer, Michael Hameyer, Kay |
Investigation of dynamic drivetrain behaviour of a wind turbine during a power converter fault Contribution to a book, Contribution to a conference proceedings, Journal Article (2018) | Duda, Tobias Philipp Roman (Corresponding author) Jacobs, Georg Bosse, Dennis |
Investigation of dynamic drivetrain behaviour of a wind turbine during a power converter fault Poster (2018) | Duda, Tobias Philipp Roman (Corresponding author) Jacobs, Georg Bosse, Dennis |
Effect of over rolling frequency on lubricant film formation in starved EHD contacts Contribution to a conference proceedings (2018) | Fischer, Dennis Jacobs, Georg Mues, Helko Stratmann, Andreas |
Teaching virtual product design at university level : a review of 3 years of Freshman student education Contribution to a book, Contribution to a conference proceedings (2018) | Weigel, Chantal Denise Jacobs, Georg Katzwinkel, Tim Dittmann, Claudia Konrad, Christian Sulejmani, Fatmir van Issum, Daniel Mirko |
Comparison and Derivable Benefits of Technical Folding Contribution to a book, Contribution to a conference proceedings (2018) | Weigel, Chantal Denise Jacobs, Georg Katzwinkel, Tim Merz, Judith Paris, Jascha Norman Corves, Burkhard Buffart, Henri Hoffmann, Susanne Trautz, Martin |
Technische Faltung : ein praktischer Entwicklungsansatz Contribution to a book, Contribution to a conference proceedings (2018) | Weigel, Chantal Denise Jacobs, Georg Katzwinkel, Tim Siebrecht, Justus Merz, Judith Paris, Jascha Norman Corves, Burkhard Buffart, Henri Hoffmann, Susanne Trautz, Martin |
Measurement uncertainty estimation of a novel torque transducer for wind turbine test benches Conference Presentation (2018) | Gnauert, Jonas Jacobs, Georg Kock, Stefan Bosse, Dennis |
Simulation method for the characterisation of torque transducers Conference Presentation (2018) | Kock, Stefan (Corresponding author) Jacobs, Georg Bosse, Dennis Strangfeld, Florian |
Range Extender Module Transmission Topology Study Journal Article (2018) | Herold, Konrad Ludwig Böhmer, Marius Savelsberg, Rene Müller, Alexander Schröter, Jan Karthaus, Jan Seo, Ŭn-jae Jacobs, Georg Hameyer, Kay Andert, Jakob Lukas (Corresponding author) |
On Using Tessellation Properties for the Development of Classifying Criteria for Foldable Mechanisms Contribution to a book, Contribution to a conference proceedings (2018) | Siebrecht, Justus Jacobs, Georg Weigel, Chantal Denise Dehn, Simon Michael Buffart, Henri Hoffmann, Susanne Paris, Jascha Norman Trautz, Martin Corves, Burkhard |
Implementing PLM by using a PDM-system in university education : evaluating 3 years of teaching Contribution to a conference proceedings (2018) | Dittmann, Claudia Jacobs, Georg Katzwinkel, Tim Konrad, Christian Sulejmani, Fatmir Weigel, Chantal Denise van Issum, Daniel Mirko |
Vollständiges Modell zur Simulation und Auralisation des Fahrzeuggeräusches in Elektrofahrzeugen Conference Presentation (2018) | Behler, Gottfried Kurt Müller-Giebeler, Mark Behrang (Corresponding author) Drichel, Pascal Jaeger, Markus Vorländer, Michael Jacobs, Georg Hameyer, Kay |
Potentials of power-split CVTs for small mobile machines Contribution to a book, Contribution to a conference proceedings (2018) | Pelger, Christian Martin Jacobs, Georg Schneider, Heinz-Dieter |
From lab to application : Improved frictional performance of journal bearings induced by single- and multi-scale surface patterns Journal Article (2018) | Grützmacher, Philipp G. (Corresponding author) Rosenkranz, Andreas Szurdak, Adam König, Florian Jacobs, Georg Hirt, Gerhard Mücklich, Frank |
Lifetime Calculation of Irregularly Oscillating Bearings in Offshore Winches Journal Article (2018) | Wöll, Lothar Christof (Corresponding author) Jacobs, Georg (Corresponding author) Kramer, Achim (Corresponding author) |
Analysis of main influencing factors on critical loads at transmission bearings and identification of critical operation states Conference Presentation (2018) | Hirt, Andreas (Corresponding author) Jacobs, Georg Neumann, Stephan Bosse, Dennis |
Cost-efficient long-term estimation of gear oil filterability considering stresses in service Journal Article (2018) | Burghardt, Gero Flórez, Andrew Jacobs, Georg |
Resource-efficient CFRP design methodology for automotive systems Contribution to a conference proceedings (2018) | Sprehe, Jonathan Beger, Anna-Lena Jacobs, Georg |
Robustness Test for Wind Turbine Gearbox Bearings Conference Presentation (2018) | Kock, Stefan Jacobs, Georg Hirt, Andreas Oberdörfer, Sergej Neumann, Stephan Bosse, Dennis |
Robustness Test for Wind Turbine Gearbox Bearings Contribution to a conference proceedings, Journal Article (2018) | Kock, Stefan (Corresponding author) Jacobs, Georg Hirt, Andreas Oberdörfer, Sergej Neumann, Stephan Bosse, Dennis |
Friction as a major uncertainty factor on torque measurement in wind turbine test benches Contribution to a conference proceedings, Journal Article (2018) | Kock, Stefan (Corresponding author) Jacobs, Georg Bosse, Dennis Sharma, Avinash |
Design of an independent smart service platform for wind turbines Contribution to a conference proceedings, Journal Article (2018) | Pagitsch, Michael (Corresponding author) Jacobs, Georg Bosse, Dennis Kock, Stefan |
Optimal operation of a gas turbine cogeneration unit with energy storage for wind power system integration Contribution to a book, Contribution to a conference proceedings (2018) | Bexten, Thomas Wirsum, Manfred Roscher, Björn Schelenz, Ralf Jacobs, Georg Weintraub, Daniel Jeschke, Peter |
Reduced Levelized Cost of Energy through Optimization of Tower Height, Rotor Diameter and Wind Farm Layout Journal Article (2018) | Roscher, Björn (Corresponding author) Jacobs, Georg Harzendorf, Freia Schelenz, Ralf |
Characterisation of elastic-plastic material characteristics of Sn solid solution, SbSn and Cu 6 Sn 5 in the tin-based sliding bearing alloy SnSb12Cu6ZnAg Journal Article (2018) | Sous, Christopher (Corresponding author) Jacobs, Georg Lutz, T. |
Influence of slip and electrical loading on the formation of White Etching Cracks on two- and four-disc test rigs Contribution to a conference proceedings (2018) | Cornel, Daniel Jacobs, Georg Gutierrez Guzman, Francisco Gerardo Antonio Özel, Mehmet Ozan Mikitisin, Adrian |
Investigation of the formation and morphology of White Etching Cracks using a two-disc test rig Contribution to a conference proceedings (2018) | Gutierrez Guzman, Francisco Gerardo Antonio Jacobs, Georg Özel, Mehmet Ozan Burghardt, Gero Broeckmann, Christoph Janitzky, Thomas L. M. Cornel, Daniel |
Drivetrain Simulation for the Assessment of the NVH-Behavior of Electric Vehicles Conference Presentation (2018) | Drichel, Pascal Jacobs, Georg Müller-Giebeler, Mark Behrang Jaeger, Markus Berroth, Joerg Karl Wegerhoff, Matthias Klein, Johannes Christian Rick, Sebastian Ferdinand Johannes Vorländer, Michael Hameyer, Kay |
Correlation of Tribofilm Formation in Rolling Bearings and Tribometers Contribution to a book, Contribution to a conference proceedings (2018) | Maneke, Julian (Corresponding author) Jacobs, Georg Stratmann, Andreas |
Reibungsreduzierung dynamischer Elastomerdichtungen durch Mikrostrukturierung der Dichtungsgleitfläche Conference Presentation (2018) | Keller, Dennis Jacobs, Georg Kramer, Achim Neumann, Stephan Paulkowski, Dominik Eifel, Stephan |
Reibungsreduzierung dynamischer Elastomerdichtungen durch Mikrostrukturierung der Dichtungsgleitfläche Contribution to a book, Contribution to a conference proceedings (2018) | Keller, Dennis Jacobs, Georg Kramer, Achim Neumann, Stephan Paulkowski, Dominik Eifel, Stephan |
Prognose von Gleitlagerverschleiß im Start-Stopp-Betrieb Contribution to a book, Contribution to a conference proceedings (2018) | König, Florian Jacobs, Georg Sous, Christopher |
Effect of Base Oil Type in Grease Composition on the Lubricating Film Formation in EHD Contacts Contribution to a book, Journal Article (2018) | Fischer, Dennis (Corresponding author) Jacobs, Georg Stratmann, Andreas Burghardt, Gero |
Prüfmethode zur Bewertung der Energieeffizienz von Radladern Journal Article (2018) | Gottschalk, Marcel Jacobs, Georg Kramer, Achim |
New material concepts for thermally sprayed hydrodynamic bearings Contribution to a book, Contribution to a conference proceedings (2018) | Bobzin, Kirsten Öte, Mehmet Königstein, Tim Denis Stefan Wietheger, Wolfgang (Corresponding author) Schröder, Tim Jacobs, Georg Bosse, Dennis |
Design study of a high speed power unit for electro hydraulic actuators (EHA) in mobile applications Contribution to a book, Contribution to a conference proceedings (2018) | Pietrzyk, Tobias (Corresponding author) Roth, David Johannes Schmitz, Katharina Jacobs, Georg |
MBSE on parameter level Contribution to a book, Contribution to a conference proceedings (2018) | Katzwinkel, Tim Jacobs, Georg von Fürstenberg, Franz Konrad, Christian Berroth, Joerg Karl |
Investigation on the Effects of Structural Dynamics on Rolling Bearing Fault Diagnosis by Means of Multibody Simulation Journal Article (2018) | Golafshan, Reza (Corresponding author) Jacobs, Georg Wegerhoff, Matthias Drichel, Pascal Berroth, Joerg Karl |
Entwicklung eines elektrisch-mechanisch leistungsverzweigten Hybridantriebs für dieselbetriebene Nahverkehrszüge Contribution to a conference proceedings (2018) | Hoffmann, Hendrik Jacobs, Georg Kramer, Achim Pelger, Christian Martin Niessen, Markus de Doncker, Rik W. |
Electrical Design of a Novel Diesel-Electric Drivetrain for Suburban Trainsets using a Power Split Variator and Energy Storage System : Design and operation strategy of the electrical part of the energy storage system and variator drive Contribution to a conference proceedings (2018) | Niessen, Markus de Doncker, Rik W. Hoffmann, Hendrik Jacobs, Georg |
Influence of Slip and Lubrication Regime on the Formation of White Etching Cracks on a Two-Disc Test Rig Contribution to a book, Journal Article (2018) | Gutierrez Guzman, Francisco Gerardo Antonio (Corresponding author) Özel, Mehmet Ozan Jacobs, Georg Burghardt, Gero Broeckmann, Christoph Janitzky, Thomas L. M. |
Parameter Control assisting morphological product conceptualization of Multi-Technology Machine-Tools Contribution to a book, Contribution to a conference proceedings (2018) | Schmid, Alexander Jacobs, Georg Löwer, Manuel Katzwinkel, Tim Schmidt, Walter Siebrecht, Justus |
Functional Surfaces as initial Product Design Concept in 3D-CAD-Systems Contribution to a book, Contribution to a conference proceedings (2018) | Katzwinkel, Tim Jacobs, Georg Löwer, Manuel Schmid, Alexander Schmidt, Walter Siebrecht, Justus |
An Information Model to estimate Efforts of Product Development Processes Contribution to a book, Contribution to a conference proceedings (2018) | Dittmann, Claudia Jacobs, Georg Felix, Valerie |
Fluggerät zum Erfassen des Windvektors Patent (2017) | Noll, Martin-Christopher Jacobs, Georg Schelenz, Ralf Meier, Marvin |
Konstruktionsmethodische Entwicklung hybrider Produktionssysteme an der RWTH Aachen Journal Article (2017) | Jacobs, Georg Schmid, Alexander Löwer, Manuel |
Functional surfaces as intial product design concept in 3D-CAD-systems Contribution to a conference proceedings (2017) | Katzwinkel, Tim Jacobs, Georg Löwer, Manuel Schmid, Alexander Schmidt, Walter Siebrecht, Justus |
FVA-Gondel: Aufbau und Betrieb der generischen Forschungs-WEA FVA 730 I Contribution to a conference proceedings (2017) | Reisch, Sebastian Jacobs, Georg Bosse, Dennis Leisten, Christian Jassmann, Uwe Abel, Dirk |
Risse auf Lagerringen : Gefügeveränderungen in Wälzlagerringen mit Rissen als Folgeschäden : Abschlussbericht ; Forschungsvorhaben Nr. 707 II Book (2017) | Gutierrez Guzman, Francisco Gerardo Antonio Özel, Mehmet Ozan Pinar, Philippe Burghardt, Gero Janitzky, Thomas L. M. Richter, Silvia Jacobs, Georg Broeckmann, Christoph Mayer, Joachim |
EHD-Betrachtung eines neuartigen Gleitlagerkonzeptes für das Hauptlager einer Windenergieanlage Conference Presentation (2017) | Schröder, Tim Jacobs, Georg Bosse, Dennis |
Plain bearings in wind turbines Journal Article (2017) | Jacobs, Georg Schelenz, Ralf Schröder, Tim Witter, Dennis Sous, Christopher |
Life cycle assessment and sustainable engineering in the context of near net shape grown components : striving towards a sustainable way of future production Journal Article (2017) | Kämpfer, Christoph Leo (Corresponding author) Seiler, Thomas-Benjamin (Corresponding author) Beger, Anna-Lena Jacobs, Georg Löwer, Manuel Moser, Franziska Julia Reimer, Julia Jessica Trautz, Martin Usadel, Björn Wormit, Alexandra Hollert, Henner |
Modelling of Wind Turbine Loads nearby a Wind Farm Contribution to a conference proceedings, Journal Article (2017) | Roscher, Björn (Corresponding author) Werkmeister, Alexander Torsten Jacobs, Georg Schelenz, Ralf |
Evaluation of the efficiency improvement potential of diesel multiple unit railcars by the use of an electrical power split hybrid drive Contribution to a book, Contribution to a conference proceedings (2017) | Hoffmann, Hendrik (Corresponding author) Jacobs, Georg Kramer, Achim Pelger, Christian Martin |
Running-in of journal bearings subjected to non-stationary conditions Conference Presentation (2017) | König, Florian Jacobs, Georg Burghardt, Gero Sous, Christopher Gutierrez Guzman, Francisco Gerardo Antonio |
Schmierfilmausbildung im Kugel/Scheibe-Kontakt: Vergleich von öl- und fettgeschmierten EHD-Kontakten Contribution to a book, Contribution to a conference proceedings (2017) | Fischer, Dennis Jacobs, Georg Burghardt, Gero |
Bestimmung des Einflusses von aktiven Turmschwingungsreduktionsmaßnahmen auf die Getriebe und Turmkopflasten einer Windenergieanlage Contribution to a book, Contribution to a conference proceedings (2017) | Werkmeister, Alexander Torsten Jacobs, Georg Kamper, Tim Berroth, Joerg Karl Schelenz, Ralf |
Influence of the detail of a wind turbine model in respect to the soil and structure to the load calculation Poster (2017) | Werkmeister, Alexander Torsten (Corresponding author) Jacobs, Georg Schelenz, Ralf Berroth, Joerg Karl Michel, Philipp Fontecha Gonzalez, Robert |
Simulative Charakterisierung einer Bogenzahnkupplung in einem 4 MW Windenergieanlagen Systemprüfstand Conference Presentation (2017) | Kock, Stefan (Corresponding author) Jacobs, Georg Bosse, Dennis Grab, Samuel |
Efficient development by automatic calibration of tractor transmission control units Contribution to a book, Contribution to a conference proceedings (2017) | Körtgen, Christopher (Corresponding author) Morandi, Gabriele Jacobs, Georg Kramer, Achim |
Einlaufverhalten von Gleitlagern im Start-Stopp-Betrieb Contribution to a book, Contribution to a conference proceedings (2017) | König, Florian Jacobs, Georg Burghardt, Gero |
A sensitivity analysis of planetary- and high speed shaft bearing loads for typical operating conditions of wind turbines Contribution to a conference proceedings (2017) | Hirt, Andreas (Corresponding author) Jacobs, Georg Neumann, Stephan Bosse, Dennis |
A Sensitivity analysis of planetary- and high speed shaft bearing loads in wind turbines Poster (2017) | Hirt, Andreas Jacobs, Georg Neumann, Stephan Bosse, Dennis |
Comprehensive model for the assessment of the NVH-behavior of electric vehicles Contribution to a book, Contribution to a conference proceedings (2017) | Müller-Giebeler, Mark Behrang Drichel, Pascal Jaeger, Markus Klein, Johannes Christian Wegerhoff, Matthias Rick, Sebastian Ferdinand Johannes Vorländer, Michael Jacobs, Georg Hameyer, Kay |
Influence of slip on the formation of White Etching Cracks on a two-disc test rig and a kinematic study on a full-scale bearing Journal Article (2017) | Gutierrez Guzman, Francisco Gerardo Antonio (Corresponding author) Özel, Mehmet Ozan Guenther, J. Jacobs, Georg Burghardt, Gero Broeckmann, Christoph Janitzky, Thomas L. M. |
Reliability Evaluation of Drivetrains : Challenges for Off‐Highway Machines Contribution to a book (2017) | Wöll, Lothar Christof (Corresponding author) Schick, Katharina Jacobs, Georg Kramer, Achim Neumann, Stephan |
Reibungsreduktion dynamischer Elastomerdichtungen durch Lasermikrostrukturierung und plasmapolymere Beschichtung Conference Presentation (2017) | Keller, Dennis (Corresponding author) Jacobs, Georg (Corresponding author) Kramer, Achim (Corresponding author) Neumann, Stephan (Corresponding author) Paulkowski, Dominik (Corresponding author) Eifel, Stephan (Corresponding author) |
Vergleich der Schmierfilmausbildung im Kugel/Scheibe-Kontakt von öl- und fettgeschmierten EHD-Kontakten Contribution to a book, Contribution to a conference proceedings (2017) | Fischer, Dennis Jacobs, Georg Burghardt, Gero |
Methods for analyzing operational data of wind turbines for enhancing economic viability Conference Presentation (2017) | Pagitsch, Michael Jacobs, Georg Bosse, Dennis |
Task 35 Full-Size, Ground Testing for Wind Turbines and Their Components Contribution to a book (2017) | Duda, Tobias Philipp Roman Jacobs, Georg Bosse, Dennis (Corresponding author) Hughes, Scott (Corresponding author) |
Making wind turbines smart - accessing and evaluating operational data of a research wind turbine Conference Presentation (2017) | Pagitsch, Michael Jacobs, Georg Bosse, Dennis |
Fault Diagnosis for Rolling Bearings in Non-Stationary Operating Conditions Caused by Torsional Vibrations Contribution to a book, Contribution to a conference proceedings (2017) | Golafshan, Reza (Corresponding author) Jacobs, Georg Wegerhoff, Matthias Gaad, Waldemar |
Reduzierung von Lagerschäden im Antriebsstrang von Windenergieanlagen : WEA-Lagerzentrum.NRW Journal Article (2017) | Neumann, Stephan Jacobs, Georg |
Neuartiger Prüfstand für Planetenradlager in Getrieben von Windenergieanlagen Journal Article (2017) | Schlüter, Felix Matthew Jacobs, Georg |
Development of an innovative component test bench for planetary bearings in wind turbine gearboxes Conference Presentation (2017) | Jacobs, Georg Bosse, Dennis Schlüter, Felix Matthew |
Klassifikation und zielgerichtete Entwicklung von wandelbaren Faltkonstruktionen Contribution to a book, Contribution to a conference proceedings (2017) | Paris, Jascha Norman (Corresponding author) Gottschalk, Marcel Buffart, Henri Hoffmann, Susanne Siebrecht, Justus Hüsing, Mathias Jacobs, Georg Trautz, Martin Corves, Burkhard |
Beiträge und Herausforderungen modellbasierter Systementwicklung in frühen Phasen des PEP aus Sicht der Forschung Contribution to a book, Contribution to a conference proceedings (2017) | Katzwinkel, Tim (Corresponding author) Jacobs, Georg Löwer, Manuel Konrad, Christian Moselewski, Daniel Sulejmani, Fatmir |
Varianzsteuerung integraler Produkte durch den prozessbegleitenden Einsatz von Data-Mining Werkzeugen Contribution to a book, Contribution to a conference proceedings (2017) | Konrad, Christian (Corresponding author) Jacobs, Georg Löwer, Manuel Schmidt, Walter |
Methode zur Analyse schlafender Fehler innerhalb einer Fehlermöglichkeits- und -einflussanalyse Contribution to a book, Contribution to a conference proceedings (2017) | Moselewski, Daniel (Corresponding author) Jacobs, Georg Löwer, Manuel Sulejmani, Fatmir Konrad, Christian Katzwinkel, Tim |
Determination of Hydraulic Losses in Radial Cylindrical Roller Bearings Using CFD Simulations Journal Article (2017) | Feldermann, Achim Fischer, Dennis Neumann, Stephan Jacobs, Georg |
Fungal mycelium as a building material Contribution to a conference proceedings (2017) | Moser, Franziska Julia (Corresponding author) Trautz, Martin Beger, Anna-Lena Löwer, Manuel Jacobs, Georg Hillringhaus, Felicitas Wormit, Alexandra Usadel, Björn Reimer, Julia Jessica |
A New Approach for Vibration-based Rolling Bearings Fault Detection in Non-Stationary Operating Conditions Contribution to a book, Contribution to a conference proceedings (2017) | Golafshan, Reza (Corresponding author) Wegerhoff, Matthias Jacobs, Georg Sanlituk, Kenan Y. |
Formation of WEC under rolling contact loading - Influence of slip and lubrication conditions Conference Presentation (2017) | Jacobs, Georg Burghardt, Gero Gutierrez Guzman, Francisco Gerardo Antonio (Corresponding author) Broeckmann, Christoph Özel, Mehmet Ozan |
Influence of slip on the formation of White Etching Cracks on a two-disc test rig Contribution to a conference proceedings (2017) | Gutierrez Guzman, Francisco Gerardo Antonio Jacobs, Georg Özel, Mehmet Ozan Burghardt, Gero Broeckmann, Christoph Janitzky, Thomas L. M. |
Calabash as a new sustainable material for lightweight design Poster (2017) | Reimer, Julia Jessica (Corresponding author) Wormit, Alexandra Pagano, Norina Beger, Anna-Lena Schäfer, Malte Jacobs, Georg Usadel, Björn |
Challenges and Opportunities of Full Size Nacelle Testing of Wind Turbine Generators Contribution to a conference proceedings (2017) | Reisch, Sebastian Jacobs, Georg Bosse, Dennis Matzke, Daniel |
Indirect rotor load measurement at structural components in the drive train of wind turbines Contribution to a book, Contribution to a conference proceedings (2017) | Reisch, Sebastian Jacobs, Georg Bosse, Dennis |
Numerical evaluation of steel cleanliness of large main bearings for multi megawatt wind energy turbines Contribution to a book, Contribution to a conference proceedings (2017) | Sauvage, Paul Jacobs, Georg Menzel, Andreas Kiefer, Björn Lüneburg, Bernd Pantke, Klaus |
Calculation model for evaluation of slippage in large diameter bearings : a combined analytical-numerical evaluation of the post-hardening risk due to slippage in large diameter bearing Contribution to a book, Contribution to a conference proceedings (2017) | Sauvage, Paul Jacobs, Georg Lüneburg, Bernd |
Validation of planetary bearing loads in wind turbine gearboxes on a 4 MW system test bench Contribution to a book, Contribution to a conference proceedings (2017) | Liewen, Christian Jacobs, Georg Bosse, Dennis |
DETERMINATION OF MODEL PARAMETERS FOR TORSIONAL VIBRATION MODELS OF DRIVETRAINS BY SYSTEM MEASUREMENTS Contribution to a conference proceedings (2017) | Juretzki, Björn Jacobs, Georg Andary, Faysal Wegerhoff, Matthias |
Thermally sprayed hydrodynamic main bearings for wind turbines Contribution to a book, Contribution to a conference proceedings (2017) | Bobzin, Kirsten Öte, Mehmet Königstein, Tim Denis Stefan Wietheger, Wolfgang Schröder, Tim Jacobs, Georg Bosse, Dennis |
Techno-Economic Study of Wind Farm Forecast Error Compensation By Flexible Heat-Driven CHP Units Contribution to a book, Contribution to a conference proceedings (2017) | Bexten, Thomas Wirsum, Manfred Roscher, Björn Schelenz, Ralf Jacobs, Georg Weintraub, Daniel Jeschke, Peter |
Experimentelle und numerische Untersuchung des Betriebsverhaltens von Gleitlagern im Start-Stopp-Betrieb Contribution to a book, Contribution to a conference proceedings (2017) | König, Florian Jacobs, Georg Burghardt, Gero |
Wearing-in of journal bearings under non-stationary conditions Contribution to a conference proceedings (2017) | König, Florian Jacobs, Georg Burghardt, Gero Gutierrez Guzman, Francisco Gerardo Antonio |
Antriebsstrangdynamik einer Windenergieanlage inklusive elektromechanischer Kopplung Contribution to a book, Contribution to a conference proceedings (2017) | Matzke, Daniel Jacobs, Georg Schelenz, Ralf Averous, Nurhan Rizqy de Doncker, Rik W. Rick, Sebastian Ferdinand Johannes Hameyer, Kay |
Entire system simulation of a 2.7 MW wind turbine on a test bench Contribution to a book, Contribution to a conference proceedings (2017) | Matzke, Daniel Jacobs, Georg Schelenz, Ralf |
Reproduction of white etching cracks under rolling contact loading on thrust bearing and two-disc test rigs Journal Article (2017) | Gutierrez Guzman, Francisco Gerardo Antonio (Corresponding author) Özel, Mehmet Ozan Jacobs, Georg Burghardt, Gero Broeckmann, Christoph Janitzky, Thomas L. M. |
Soil-Structure Drive Train Interaction of wind turbine Conference Presentation (2017) | Werkmeister, Alexander Torsten Jacobs, Georg Shkara, Yasir Michel, Philipp Fontecha Gonzalez, Robert Schelenz, Ralf |
Energy System Integration Characteristics of Innovative Wind Turbine Concepts Conference Presentation (2017) | Harzendorf, Freia Homann, Jona Schelenz, Ralf Jacobs, Georg |
Methodological development of an optimized product emergence process for fiber reinforced polymers Contribution to a book, Contribution to a conference proceedings (2017) | Sprehe, Jonathan Jacobs, Georg Alpmann, Henrik Heuser, Helena |
The potential of naturally grown bent bamboo structures : quantifying the effect of thermal bending on their tensile strength Contribution to a book, Contribution to a conference proceedings (2017) | Beger, Anna-Lena Merkord, F. Löwer, Manuel Schäfer, Malte Jacobs, Georg Moser, Franziska Julia Trautz, Martin Reimer, Julia Jessica Wormit, Alexandra Usadel, Björn Kämpfer, Christoph Leo Seiler, Thomas-Benjamin Hollert, Henner |
A Functional Platform Strategy for Integrated Machine Tools Contribution to a conference proceedings, Journal Article (2017) | Schmid, Alexander (Corresponding author) Jacobs, Georg Löwer, Manuel Katzwinkel, Tim Schmidt, Walter Siebrecht, Justus |
Determination of hydraulic losses in radial cylindrical roller bearings using CFD simulations Contribution to a conference proceedings, Journal Article (2017) | Feldermann, Achim Fischer, Dennis (Corresponding author) Neumann, Stephan Jacobs, Georg |
Conception of 5 MNm torque transducer for wind turbine test benches Conference Presentation (2017) | Kock, Stefan (Corresponding author) Jacobs, Georg Bosse, Dennis Gnauert, Jonas |
Conception of 5 MNm torque transducer for wind turbine test benches Contribution to a book, Contribution to a conference proceedings (2017) | Kock, Stefan (Corresponding author) Jacobs, Georg (Corresponding author) Bosse, Dennis (Corresponding author) Gnauert, Jonas (Corresponding author) |
Impact of Dispatchable Energy Conversion and Storage Units on the Electrical Autarky of Future Municipal Energy Supply Systems Contribution to a conference proceedings (2017) | Bexten, Thomas (Corresponding author) Wirsum, Manfred Roscher, Björn Schelenz, Ralf Jacobs, Georg Weintraub, Daniel Bachmann Schiavo, Ralf de Doncker, Rik W. |
Verschleißschutz im Wälzlager durch Grenzschichtbildung bei minimaler Additivkonzentration Contribution to a book, Contribution to a conference proceedings (2017) | Stratmann, Andreas Jacobs, Georg Hsu, Chia-Jui Gachot, Carsten Burghardt, Gero |
Antiwear tribofilm growth in rolling bearings under boundary lubrication conditions Contribution to a conference proceedings, Journal Article (2017) | Stratmann, Andreas (Corresponding author) Jacobs, Georg Hsu, Chia-Jui Gachot, Carsten Burghardt, Gero |
Development of a 4 MW Full-Size Wind-Turbine Test Bench Journal Article (2017) | Averous, Nurhan Rizqy Stieneker, Marco Kock, Stefan Andrei, Teofil-Cristian Helmedag, Alexander Sebastian de Doncker, Rik W. Hameyer, Kay Jacobs, Georg Monti, Antonello |
Leistungsverzweigte Antriebe mit mechanischem Variator Journal Article (2017) | Pelger, Christian Martin Jacobs, Georg Schneider, Heinz-Dieter Kramer, Achim |
Automatisierte Synthese leistungsverzweigender Antriebe Contribution to a book, Contribution to a conference proceedings (2017) | Pelger, Christian Martin Jacobs, Georg Straßburger, Felix |
Bildung von "White Etching Cracks" (WEC) durch elektrischen Strom an ölgeschmierten Wälzkontakten Contribution to a book, Contribution to a conference proceedings (2017) | Gutierrez Guzman, Francisco Gerardo Antonio Özel, Mehmet Ozan Jacobs, Georg Broeckmann, Christoph Burghardt, Gero Janitzky, Thomas L. M. |
Sensitivity Analysis on the Reliability of an Offshore Winch Regarding Selected Gearbox Parameters Journal Article (2017) | Wöll, Lothar Christof (Corresponding author) Jacobs, Georg (Corresponding author) Feldermann, Achim (Corresponding author) |
Vibration-based Condition Monitoring for Wind Turbines: Applications of Singular Value Decomposition Contribution to a book, Contribution to a conference proceedings (2017) | Golafshan, Reza (Corresponding author) Wegerhoff, Matthias Jacobs, Georg Ozay, Arda Idris |
Einfluss der Wellenhöhe auf die Zuverlässigkeit einer Offshore-Winde Contribution to a book, Contribution to a conference proceedings (2017) | Wöll, Lothar Christof Jacobs, Georg Feldermann, Achim Neumann, Stephan Straßburger, Felix |
Torque measurement uncertainty in multi-MW nacelle test benches Contribution to a book, Contribution to a conference proceedings (2017) | Kock, Stefan Jacobs, Georg Bosse, Dennis Weidinger, Paula |
Conference for Wind Power Drives : conference proceedings, Aachen 7th-8th of March 2017 Book, Proceedings (2017) | Abel, Dirk (Editor) Brecher, Christian (Editor) de Doncker, Rik W. (Editor) Hameyer, Kay (Editor) Jacobs, Georg (Editor) Monti, Antonello (Editor) Schröder, Wolfgang (Editor) Werkmeister, Alexander Torsten (Editor) |
Antriebstechnisches Kolloquium : ATK 2017 : Aachen 07.-08. März : Tagungsband, Aachen 07.-08. März Book, Proceedings (2017) | Jacobs, Georg (Editor) Schlüter, Felix Matthew (Editor) |
CFD simulation of elastohydrodynamic lubrication problems with reduced order models for fluid-structure interaction Journal Article (2017) | Feldermann, Achim (Corresponding author) Neumann, Stephan Jacobs, Georg |
Multiscale characterization of White Etching Cracks (WEC) in a 100Cr6 bearing from a thrust bearing test rig Journal Article (2016) | Danielsen, H. K. (Corresponding author) Gutierrez Guzman, Francisco Gerardo Antonio Dahl, K. V. Li, Y. J. Wu, J. Jacobs, Georg Burghardt, Gero Fæster, S. Alimadadi, H. Goto, S. Raabe, D. Petrov, R. |
Cyber-Physical Systems for Agricultural and Construction Machinery : Current Applications and Future Potential Contribution to a book (2016) | Jacobs, Georg (Corresponding author) Schlüter, Felix Matthew Schröter, Jan Feldermann, Achim Straßburger, Felix (Corresponding author) |
Application of CPS Within Wind Energy : Current Implementation and Future Potential Contribution to a book (2016) | Kunzemann, Paul (Corresponding author) Jacobs, Georg (Corresponding author) Schelenz, Ralf (Corresponding author) |
Schnelldrehende Elektrische Antriebe für Bau- und Landmaschinen Contribution to a book, Contribution to a conference proceedings (2015) | Schröter, Jan Jacobs, Georg Straßburger, Felix |
Antiwear Performance Testing for Real Life Bearing Applications Conference Presentation (2016) | Berninger, Sven Jacobs, Georg Burghardt, Gero |
Leistungsverzweigte Antriebe mit mechanischem Variator für kleine, mobile Maschinen Conference Presentation (2016) | Jacobs, Georg Straßburger, Felix Pelger, Christian Martin |
Reibungs- und Leckagereduzierung bei dynamischen Kontaktdichtungen Contribution to a book (2016) | Neumann, Stephan Jacobs, Georg Straßburger, Felix |
Tribolayer Formation on Bronze Cu Sn12Ni2 in the Tribological Contact between Cylinder and Control Plate in an Axial Piston Pump with Swashplate Design Contribution to a conference proceedings (2016) | Paulus, Andreas (Corresponding author) Jacobs, Georg (Corresponding author) |
CFD-based analysis of thermal shear localization in EHL films Contribution to a book, Contribution to a conference proceedings, Journal Article (2016) | Feldermann, Achim Jacobs, Georg van Lier, Hermann |
Thermisch gespritzte Gleitlagerwerkstoffe für die Rotorlagerung von Windenergieanlagen Journal Article (2016) | Schröder, Tim (Corresponding author) Jacobs, Georg Bosse, Dennis Bobzin, Kirsten Öte, Mehmet Königstein, Tim Denis Stefan Wietheger, Wolfgang |
Towards a holistic view on wind turbine generators development Conference Presentation (2016) | Harzendorf, Freia Jacobs, Georg Schelenz, Ralf |
Einfluss von Prozessparametern auf die Funktionserfüllung von Bauteilen beim Fused Deposition Modeling Contribution to a book, Contribution to a conference proceedings (2016) | Siebrecht, Justus Jacobs, Georg Beckers, Alexander Löwer, Manuel Schmidt, Walter Körber, Michael |
Verschleißminimierende Grenzschichtbildung und Grenzschichtwachstum in Wälzlagern Conference Presentation (2016) | Stratmann, Andreas (Corresponding author) Burghardt, Gero Jacobs, Georg |
Multiscale analysis of White Etching Cracks (WEC) : Bearing analysis: From tribological contact to full-scale wind turbine nacelle Poster (2016) | Gutierrez Guzman, Francisco Gerardo Antonio (Corresponding author) Jacobs, Georg Schelenz, Ralf (Corresponding author) |
Simulation des Reibungs- und Verschleißverhaltens von Gleitlagern während des Startvorgangs Conference Presentation (2016) | König, Florian Jacobs, Georg Sous, Christopher Burghardt, Gero |
Entstehung von White Etching Cracks (WEC) in Wälzkontakten Conference Presentation (2016) | Jacobs, Georg Burghardt, Gero Gutierrez Guzman, Francisco Gerardo Antonio Broeckmann, Christoph Janitzky, Thomas L. M. Özel, Mehmet Ozan |
Festere Klebeverbindungen durch Flächenstrukturierungadditiv gefertigter Teile Contribution to a book, Contribution to a conference proceedings (2016) | Schmidt, Walter Jacobs, Georg Yang, Yimin Löwer, Manuel |
Datenbankbasierte Kompatibilitätsbewertung technologieintegrierender Werkzeugmaschinen Contribution to a book, Contribution to a conference proceedings (2016) | Schmid, Alexander Jacobs, Georg Löwer, Manuel Katzwinkel, Tim Schmidt, Walter Siebrecht, Justus |
Einfluss betrieblicher Flexibilitätsparameter einer Gasturbine auf Auslegung und Betrieb eines dezentralen Energieversorgungssystems Contribution to a book, Contribution to a conference proceedings (2016) | Bexten, Thomas (Corresponding author) Weintraub, Daniel Wirsum, Manfred Roscher, Björn Bachmann Schiavo, Ralf Jeschke, Peter Jacobs, Georg Schelenz, Ralf de Doncker, Rik W. |
Feasibility of large-scale calorimetric efficiency measurement for wind turbine generator drivetrains Contribution to a book, Contribution to a conference proceedings, Journal Article (2016) | Pagitsch, Michael (Corresponding author) Jacobs, Georg Schelenz, Ralf Bosse, Dennis Liewen, Christian Reisch, Sebastian Deicke, Matthias |
Coupling of electromagnetic and structural dynamics for a wind turbine generator Contribution to a conference proceedings, Journal Article (2016) | Matzke, Daniel (Corresponding author) Rick, Sebastian Ferdinand Johannes Hollas, S. Schelenz, Ralf Jacobs, Georg Hameyer, Kay |
Belastungsanalyse an den Antriebskomponenten von Windenergieanlagen auf einem Systemprüfstand der Multimegawatt-Klasse Contribution to a conference proceedings (2016) | Liewen, Christian (Corresponding author) Jacobs, Georg (Corresponding author) Bosse, Dennis (Corresponding author) |
Reibungs- und Verschleißverhalten von Gleitlagerungen im Start-Stopp-Betrieb Contribution to a book, Contribution to a conference proceedings (2016) | König, Florian Jacobs, Georg Burghardt, Gero |
Influence of surface texturing on the wear behaviour of rolling bearings Conference Presentation (2016) | Stratmann, Andreas (Corresponding author) Burghardt, Gero Hsu, Chia Jui Jacobs, Georg |
Anti-wear tribofilm growth in rolling bearings under boundary lubrication conditions Conference Presentation (2016) | Stratmann, Andreas Jacobs, Georg Hsu, Chia-Jui Gachot, Carsten Burghardt, Gero |
Influence of Operating Conditions and Additive Concentration on the Formation of Anti-wear Layers in Roller Bearings Contribution to a conference proceedings (2016) | Stratmann, Andreas Burghardt, Gero Jacobs, Georg |
New Drive Train Concept with Multiple High Speed Generator Contribution to a conference proceedings, Journal Article (2016) | Barenhorst, Friederike (Corresponding author) Serowy, Simon Andrei, Teofil-Cristian Schelenz, Ralf Jacobs, Georg Hameyer, Kay |
Investigation on pitch system loads by means of an integral multi body simulation approach Contribution to a book, Contribution to a conference proceedings, Journal Article (2016) | Berroth, Joerg Karl (Corresponding author) Jacobs, Georg Kroll, T. Schelenz, Ralf |
Capabilities of Wind Turbine Ground Testing Conference Presentation (2016) | Bosse, Dennis (Corresponding author) Jacobs, Georg Duda, Tobias Philipp Roman |
Capabilities of wind turbine ground test facilities : Benefits from standardizing test methods of blade and nacelle test center around the world Abstract, Contribution to a conference proceedings, Journal Article (2016) | Bosse, Dennis (Corresponding author) Jacobs, Georg |
Microstructural and Chemical Characterization of the Tribolayer Formation in Highly Loaded Cylindrical Roller Thrust Bearings Journal Article (2016) | Gachot, Carsten (Corresponding author) Hsu, ChiaJui Suárez, Sebastián Grützmacher, Philipp Rosenkranz, Andreas Stratmann, Andreas Jacobs, Georg |
Prediction of fatigue limit of journal bearings considering a multi-axial stress state Journal Article (2016) | Sous, Christopher (Corresponding author) Wünsch, Henrik Jacobs, Georg Broeckmann, Christoph |
Zwangskräfte und Biegemomente - Non-Torque Loads - in Antriebssträngen von Windturbinen: Wirkungsvolle Reduktion von Zwangskräften und Biegemomentenmit Hilfe einer Low-Speed Kupplung aus Verbundwerkstoffen Journal Article (2016) | Kari, Alexander (Corresponding author) Jacobs, Georg Sigle, Christof Schelenz, Ralf Berroth, Joerg Karl Kunzemann, Paul |
DRESP2SIMPACK II : Portierung weiterer Berechnungsroutinen aus DRESP nach SIMPACK : Forschungsvorhaben Nr. 603 II Report (2016) | Andary, Faysal Jacobs, Georg Wegerhoff, Matthias |
Portierung weiterer Berechnungsroutine aus DRESP nach SIMPACK Preprint (2016) | Andary, Faysal Jacobs, Georg Wegerhoff, Matthias |
Modellbasierte Analyse der Auslegung und des Betriebs kommunaler Energieversorgungssysteme Contribution to a conference proceedings (2016) | Bexten, Thomas Roscher, Björn Weintraub, Daniel Bachmann, Ralf Schelenz, Ralf Jacobs, Georg Jeschke, Peter de Doncker, Rik W. Wirsum, Manfred |
Modular System Modeling for Quantitative Reliability Evaluation of Technical Systems Journal Article (2016) | Neumann, Stephan (Corresponding author) Wöll, Lothar Christof Feldermann, Achim Straßburger, Felix Jacobs, Georg |
Reducing Friction and Leakage by Means of Microstructured Sealing Surfaces - Example Mechanical Face Seal Conference Presentation (2016) | Wolking, Sebastian Neumann, Stephan (Corresponding author) Jacobs, Georg Feldermann, Achim Straßburger, Felix |
Reducing Friction and Leakage by Means of Microstructured Sealing Surfaces - Example Mechanical Face Seal Contribution to a conference proceedings (2016) | Neumann, Stephan (Corresponding author) Jacobs, Georg Feldermann, Achim Straßburger, Felix |
FEM as a Tool for the Stress Assessment of Complex Structures Using the Example of the RWTH 4MW Wind Turbine Test Bench Conference Presentation (2016) | Kock, Stefan (Corresponding author) Bosse, Dennis (Corresponding author) Jacobs, Georg (Corresponding author) |
Multiphysikalische Verlustmodellierung in mobilen Arbeitsmaschinen - Anwendungsbeispiel Hybridbagger Contribution to a book, Contribution to a conference proceedings (2016) | Feldermann, Achim Jacobs, Georg Lux, Jan (Corresponding author) Murrenhoff, Hubertus Eichler, Katharina Pischinger, Stefan Kurpat, Thorsten Hameyer, Kay Bubert, Andreas de Doncker, Rik W. |
Analysis of time-domain signals of piezoelectric strain sensors on slow spinning planetary gearboxes Abstract, Journal Article (2016) | Noll, Martin-Christopher (Corresponding author) Godfrey, Julian William Schelenz, Ralf Jacobs, Georg |
Influencing factors for static immersion tests of compatibility between elastomeric materials and lubricants Journal Article (2015) | Flórez, Andrew (Corresponding author) Burghardt, Gero Jacobs, Georg |
Improved Wear Behavior of Cylindrical Roller Thrust Bearings by Three-Beam Laser Interference Contribution to a book, Journal Article (2015) | Rosenkranz, Andreas (Corresponding author) Stratmann, Andreas Gachot, Carsten Burghardt, Gero Jacobs, Georg Mücklich, Frank |
Hardware In the Loop Operating Mode for Full Size Nacelle Testing Contribution to a book, Contribution to a conference proceedings (2016) | Franzen, Stefan Schelenz, Ralf Radner, Dominik Bosse, Dennis Jacobs, Georg |
Antriebstechnisches Kolloquium ATK 2015 : Tagungsband 16. Antriebstechnisches Kolloquium ; Aachen, 03. - 04. März 2015 Book, Proceedings (2015) | Jacobs, Georg (Editor) |
Automated parameterization of the transmission control unit for a power split tractor transmission Contribution to a book, Contribution to a conference proceedings (2015) | Körtgen, Christopher Morandi, Gabriele Jacobs, Georg Straßburger, Felix |
Development of a 4 MW Full-Size Wind-Turbine Test Bench Contribution to a book, Contribution to a conference proceedings (2015) | Averous, Nurhan Rizqy Stieneker, Marco Kock, Stefan Andrei, Teofil-Cristian Helmedag, Alexander Sebastian de Doncker, Rik W. Hameyer, Kay Jacobs, Georg Monti, Antonello |
CFD Modeling of Elastohydrodynamic Lubrication Using Reduced FE-Models Contribution to a book, Contribution to a conference proceedings (2015) | Feldermann, Achim (Corresponding author) Neumann, Stephan Jacobs, Georg |
The Effect of a Flexible Low-Speed Coupling on the Wind Drivetrain`s Dynamics Poster (2015) | Kari, Alexander Jacobs, Georg Sigle, Christof Schelenz, Ralf Berroth, Joerg Karl Kunzemann, Paul |
Task 35 Full Size Ground Testing of Wind Turbines and their Components Conference Presentation (2015) | Franzen, Stefan Jacobs, Georg Bosse, Dennis |
Belastungen an den Antriebskomponenten von Windenergieanlagen Conference Presentation (2015) | Bosse, Dennis Jacobs, Georg |
Entwicklung und Erprobung eines energieeffizienten Antriebs- und Steuerungssystems für den Grünen Radlader Contribution to a book, Contribution to a conference proceedings (2015) | Bach, Markus (Corresponding author) Straßburger, Felix Jacobs, Georg Schneider, Markus Koch, Oliver Weber, Jürgen |
Verbundprojekt TEAM - Technologieträger Grüner Radlader, 5. Teil: Kraftstoffeinsparung durch optimierte Komponenten und innovative Maschinensteuerung Journal Article (2015) | Schneider, Markus Koch, Oliver Weber, Jürgen Bach, Markus Jacobs, Georg |
Gleitlager - hidden champions? Journal Article (2015) | Jacobs, Georg |
Analyse der Schädigungsmechanismen von Wälzlagern unter externen Vibrationen : FVA Forschungsreport 589 II Einfluss von Vibrationsanregung auf Wälzlager Report (2015) | Gaad, Waldemar Wegerhoff, Matthias Jacobs, Georg Fruth, Torben Kiekbusch, Timo Sauer, Bernd |
FVA 589 II Einfluss von Vibrationen auf Wälzlager Poster (2015) | Gaad, Waldemar Wegerhoff, Matthias Jacobs, Georg |
Automatisierte Parametrierung der Gebriebsteuerung eines leistungsverzweigten Getriebes Contribution to a conference proceedings (2015) | Körtgen, Christopher Morandi, Gabriele Jacobs, Georg Straßburger, Felix |
Prognosemethodik der Schallleistung von Getrieben während der Konstruktionsphase Conference Presentation (2015) | Kirsch, Vadim Wegerhoff, Matthias Jacobs, Georg |
Prognosemethodik der Schallleistung von Getrieben während der Konstruktionsphase Contribution to a conference proceedings, Journal Article (2015) | Kirsch, Vadim Wegerhoff, Matthias Jacobs, Georg |
NVH Messungen an einer Straßenbahn Poster (2015) | Kirsch, Vadim Schelenz, Ralf Jacobs, Georg |
Prognosemethodik der Schallleistung von Getrieben während der Konstruktionsphase Poster (2015) | Kirsch, Vadim Wegerhoff, Matthias Schelenz, Ralf Jacobs, Georg |
Beispiele von Messkampagnen des Institutes für Maschinenelemente und Maschinengestaltung Poster (2015) | Kirsch, Vadim Schelenz, Ralf Jacobs, Georg Wegerhoff, Matthias |
Bestimmung der Ermüdungsfestigkeit von Weißmetallgleitlagerbeschichtungen Contribution to a book, Contribution to a conference proceedings (2015) | Sous, Christopher (Corresponding author) Burghardt, Gero Jacobs, Georg |
Nacelle Test Benches for Model Validation Conference Presentation (2015) | Berroth, Joerg Karl (Corresponding author) Bi, Laiye (Corresponding author) Matzke, Daniel (Corresponding author) Werkmeister, Alexander Torsten (Corresponding author) Schelenz, Ralf (Corresponding author) Jacobs, Georg (Corresponding author) |
Kennwertverhalten von Elastomerkupplungen unter hochdynamischer Belastung Poster (2015) | Günther, Jonathan Wegerhoff, Matthias Jacobs, Georg |
MBS Gear-tooth Stiffness Model - Implementation of a new coupling model for fast and accurate simulation of gear pairs using stiffness characteristic arrays Conference Presentation (2015) | Andary, Faysal Wegerhoff, Matthias Piel, Daniel Jacobs, Georg Brecher, Christian |
MBS Gear-tooth Stiffness Model - Implementation of a new coupling model for fast and accurate simulation of gear pairs using stiffness characteristic arrays Contribution to a book, Contribution to a conference proceedings (2015) | Andary, Faysal Jacobs, Georg Wegerhoff, Matthias Piel, Daniel Brecher, Christian |
Rapid Wind : Alternative Drive Train Concept with Multiple High Speed Generators Conference Presentation (2015) | Serowy, Simon Barenhorst, Friederike Schelenz, Ralf Jacobs, Georg |
Herausforderungen und Beanspruchungen an Lagern in Windenergieanlagen (WEA) Contribution to a book, Contribution to a conference proceedings (2015) | Gutierrez Guzman, Francisco Gerardo Antonio (Corresponding author) Schelenz, Ralf Burghardt, Gero Jacobs, Georg |
Influence of Run-in Procedures on the Formation of Anti-wear Films in Planetary Gears Contribution to a book, Contribution to a conference proceedings (2015) | Gutierrez Guzman, Francisco Gerardo Antonio Stratmann, Andreas Burghardt, Gero Jacobs, Georg |
10MW low wind turbine Poster (2015) | Berroth, Joerg Karl Busch, C. Schelenz, Ralf Jacobs, Georg |
Local Energy Output : leveling of Renewable Sources Poster (2015) | Roscher, Björn Schönheit, H. Schelenz, Ralf Jacobs, Georg |
The Effect of a Flexible Low-Speed Coupling on the Wind Drivetrain`s Dynamics Conference Presentation (2015) | Kari, Alexander Jacobs, Georg Sigle, Christof Schelenz, Ralf Berroth, Joerg Karl Kunzemann, Paul |
Method for determination of transversely isotropic material parameters for the model of a laminated stator with windings Contribution to a book, Contribution to a conference proceedings (2015) | Wegerhoff, Matthias (Corresponding author) Drichel, Pascal Back, Bruno Schelenz, Ralf Jacobs, Georg |
Hybrid NVH Simulation for Electrical Vehicles II - Structural Model Contribution to a book, Contribution to a conference proceedings (2015) | Wegerhoff, Matthias (Corresponding author) Schelenz, Ralf Jacobs, Georg |
Development of Active load Alleviation Methods for large Wind Turbines Conference Presentation (2015) | Öngüt, Emre Flock, Sebastian Schelenz, Ralf Jacobs, Georg Behr, Marek |
Influence of run-in procedures and thermal surface treatment on the anti-wear performance of additive-free lubricant oils in rolling bearings Journal Article (2015) | Burghardt, Gero (Corresponding author) Wächter, Florian Jacobs, Georg Hentschke, Chistoph |
CFD Modeling of Elastohydrodynamic Lubrication with Reduced Order Models for Fluid-Structure Interaction Conference Presentation (2015) | Feldermann, Achim (Corresponding author) Neumann, Stephan Jacobs, Georg |
CFD Modelling of Elastohydrodynamic Lubrication Using High-Pressure Rheology Models Contribution to a conference proceedings, Journal Article (2015) | Feldermann, Achim (Corresponding author) Neumann, Stephan Jacobs, Georg |
CFD Modeling of Elastohydrodynamic Lubrication Using Reduced FE-Models Conference Presentation (2015) | Feldermann, Achim (Corresponding author) Neumann, Stephan Jacobs, Georg |
Funktionalisierung der Gleitflächen von Laufwerkdichtungen Journal Article (2015) | Neumann, Stephan (Corresponding author) Feldermann, Achim Straßburger, Felix Jacobs, Georg |
Reibungs- und Leckagereduzierung bei dynamischen Kontaktdichtungen Journal Article (2015) | Neumann, Stephan (Corresponding author) Straßburger, Felix Jacobs, Georg |
Modellierung und Analyse des Schwingungsverhaltens eines Elektrofahrzeug-Antriebsstrangs Poster (2015) | Drichel, Pascal Wegerhoff, Matthias Schelenz, Ralf Jacobs, Georg |
Multiphysikalische Simulationsplattform zur Verlustmodellierung in mobilen Arbeitsmaschinen am Beispiel eines Hybridbaggers Contribution to a book, Contribution to a conference proceedings (2015) | Feldermann, Achim Jacobs, Georg Lux, Jan (Corresponding author) Murrenhoff, Hubertus Eichler, Katharina Pischinger, Stefan Bubert, Andreas de Doncker, Rik W. Kurpat, Thorsten Hameyer, Kay |
Funktionalisierung der Gleitflächen von Gleitringdichtungen durch Mikrostrukturen zur Reduzierung von Reibung und Leckage Contribution to a book, Contribution to a conference proceedings (2015) | Neumann, Stephan (Corresponding author) Jacobs, Georg Feldermann, Achim Straßburger, Felix |
6 MW Wind Turbine with Multiple High-speed Generators Contribution to a conference proceedings (2015) | Serowy, Simon Andrei, Cristian Barenhorst, Friederike Schelenz, Ralf Jacobs, Georg Appunn, Rüdiger Hameyer, Kay |
Dynamic simulation of full-scale nacelle test rig with focus on drivetrain response under emulated loads Contribution to a conference proceedings (2015) | Bi, Laiye Schelenz, Ralf Jacobs, Georg |
Test-based study of the influence of 6DOF wind loads on the local loads in a wind turbine gearbox Contribution to a conference proceedings (2015) | Radner, Dominik Jacobs, Georg Schelenz, Ralf Bosse, Dennis |
New infrastructure and test procedures for analyzing the effects of wind and grid loads on the local loads of wind turbine drivetrain components Contribution to a conference proceedings (2015) | Liewen, Christian Radner, Dominik Bosse, Dennis Schelenz, Ralf Jacobs, Georg |
Development of a 4 MW Full-Size Wind Turbine Test Bench Conference Presentation (2015) | Averous, Nurhan Rizqy Stieneker, Marco Kock, Stefan Andrei, Teofil-Cristian Helmedag, Alexander Sebastian de Doncker, Rik W. Hameyer, Kay Jacobs, Georg Monti, Antonello |
Schädlicher Wälzlagerschlupf : Wann ist Wälzlagerschlupf schädlich und führt zum Ausfall des Wälzlagers? ; Abschlussbericht Report (2015) | van Lier, Hermann Hentschke, Christoph Jacobs, Georg |
Wann ist Wälzlagerschlupf schädlich und führt zum Ausfall des Wälzlagers? Preprint (2015) | van Lier, Hermann Hentschke, Christoph Jacobs, Georg |
Risse auf Lagerringen : Gefügeveränderungen in Wälzlagerringen mit Rissen als Folgeschaden : Abschlussbericht Report (2015) | Bongardt, Christian Ploß, Moritz Özel, Mehmet Ozan Richter, Silvia Hentschke, Christoph Jacobs, Georg |
Gefügeveränderungen in Wälzlagerringen mit Rissen als Folgeschaden Report (2015) | Bongardt, Christian Özel, Mehmet Ozan Richter, Silvia Hentschke, Christoph Jacobs, Georg |
Zuverlässige Funktionsfähigkeit reibschlüssiger Freiläufe : eine Auslegungsempfehlung Journal Article (2015) | Jacobs, Georg Hentschke, Christoph (Corresponding author) Neubert, Sebastian (Corresponding author) |
Hardware in the Loop for Nacelle Test Benches Journal Article (2015) | Franzen, Stefan Bosse, Dennis Radner, Dominik Jacobs, Georg Schelenz, Ralf |
Automatisierte Parametrierung der Getriebesteuerung eines leistungsverzweigten Getriebes Contribution to a conference proceedings (2015) | Körtgen, Christopher Morandi, Gabriele Jacobs, Georg Straßburger, Felix |
Gezielte Erzeugung funktionaler Grenzschichten zur Verschleißreduktionin Wälzlagern Contribution to a book, Contribution to a conference proceedings (2015) | Burghardt, Gero Jacobs, Georg |
Graufleckenbildung im Wälzlager : Schadensbild und Einflussfaktoren Contribution to a book, Contribution to a conference proceedings (2015) | Bongardt, Christian Hentschke, Christoph Jacobs, Georg |
White Etching Cracks (WEC) an Wälzlagern : Erscheinungsformen, Entstehungsmechanismen und Schadensreproduktion Contribution to a book, Contribution to a conference proceedings (2015) | Ploß, Moritz Bongardt, Christian Burghardt, Gero Jacobs, Georg |
Das mechanische IVT : Idee/Funktion/Umsetzung Contribution to a book, Contribution to a conference proceedings (2015) | Pelger, Christian Martin Jacobs, Georg Straßburger, Felix |
Drehschwingungsbetrachtung zur Auslegung eines Synchrongelenks für den Einsatz in hydrostatischen Schrägachsenmotoren Contribution to a book, Contribution to a conference proceedings (2015) | Steinwede, Johannes Jacobs, Georg Straßburger, Felix |
Laufwerkdichtungen werden leistungsfähiger : Die Funktionalisierung der Gleitflächen von Gleitringdichtungen macht durch neue Verfahren Fortschritte Journal Article (2015) | Neumann, Stephan (Corresponding author) Jacobs, Georg Armbrüster, Stefan Eifel, Stephan |
Effizienzsteigerung im Produktentwicklungsprozess durch den Einsatz von Drehschwingungssimulation in frühen Entwicklungsphasen Contribution to a conference proceedings (2014) | Juretzki, Björn Jacobs, Georg Schelenz, Ralf |
Efficiency Boost in Product Development Processes through Support by Torsional Vibration Simulation in Early Development Phases Contribution to a conference proceedings (2014) | Juretzki, Björn Jacobs, Georg Schelenz, Ralf |
Einfluss von Vibrationsanregung auf Wälzlager : Bewertung von Schwingungsanregung hinsichtlich möglicher Schädigung an Wälzlagern unter Einbeziehung der Umgebungskonstruktion ; Abschlussbericht Report (2014) | John, Sebastian Jacobs, Georg Kiekbusch, Timo Schelenz, Ralf |
Design Concepts of 10+ MW Wind Turbine Gearbox Conference Presentation (2014) | Mohamed, Tarek Jacobs, Georg Bosse, Dennis |
Prognosemethodik der Schallleistung von Getrieben während der Konstruktionsphase Contribution to a conference proceedings (2014) | Kirsch, Vadim Wegerhoff, Matthias Jacobs, Georg |
EF2046: Erweiterte Antriebsstrangsimulation für Windenergieanlagen Poster (2014) | Kamper, Tim Berroth, Joerg Karl Schelenz, Ralf Berger, Günter Jacobs, Georg |
Development of High Speed Electrical Drives for Mobile Machinery : Challenges and Potential Solutions Contribution to a book, Contribution to a conference proceedings (2014) | Schröter, Jan (Corresponding author) Jacobs, Georg Zhitkova, Svetlana (Corresponding author) Felden, Matthias Hameyer, Kay |
Verbundprojekt TEAM : High-Speed-E-Antriebe für mobile Arbeitsmaschinen ; 4. Teil: Ein Ansatz zur Steigerung von Effizienz und Leistungsdichte elektrischer Antriebe Journal Article (2014) | Schröter, Jan (Corresponding author) Jacobs, Georg |
High Speed Electrical Drives for Mobile Machinery : Drive Concept and Selected Components Contribution to a conference proceedings (2014) | Schröter, Jan (Corresponding author) Jacobs, Georg |
Modellierung und Analyse des Schwingungsverhaltens eines Elektrofahrzeug-Antriebsstrangs Contribution to a conference proceedings (2014) | Drichel, Pascal Wegerhoff, Matthias Schelenz, Ralf Jacobs, Georg |
Modeling an electric vehicle powertrain and analysis of vibration characteristics Contribution to a conference proceedings (2014) | Drichel, Pascal (Corresponding author) Wegerhoff, M. Schelenz, Ralf Jacobs, Georg |
Gondeltest auf Systemprüfständen : Möglichkeiten und Herausforderungen Contribution to a conference proceedings (2014) | Schelenz, Ralf Jacobs, Georg |
Full size nacelle testing on two different test benches Contribution to a conference proceedings (2014) | Liewen, Christian Jacobs, Georg Bosse, Dennis |
Leistungsverzweigtes Hybrid-Getriebekonzept für Regionalbahnen Contribution to a conference proceedings (2014) | Pelger, Christian Martin Jacobs, Georg (Corresponding author) |
Dynamic drive train analysis and control of geared wind turbine pitch systems Contribution to a conference proceedings (2014) | Berroth, Joerg Karl Kamper, Tim (Corresponding author) Schelenz, Ralf (Corresponding author) Jacobs, Georg (Corresponding author) |
Prognose des Wälzlagerverschleißverhaltens unter Berücksichtigung von Regenerationszeiten und Schmierungsbedingungen : FVA 327 I : Forschungsreport zu FVA Informationstagung 02.12.2014 Contribution to a conference proceedings, Journal Article (2014) | Bongardt, Christian Hentschke, Christoph Jacobs, Georg |
Einfluss der Additivkonzentration bei ZDDP-additiviertem Mineralöl auf den Verschleißschutz in Wälzlagern Contribution to a book, Contribution to a conference proceedings (2014) | Stratmann, Andreas Hentschke, Christoph Jacobs, Georg |
High Speed Electrical Drives for Mobile Machinery - Drive Concept and Selected Components Contribution to a conference proceedings (2014) | Schröter, Jan Jacobs, Georg |
Einfluss der Betriebsbedingungen und des Schmierstoffs auf die Graufleckenbildung im Wälzlager Conference Presentation (2014) | Bongardt, Christian Hentschke, Christoph Jacobs, Georg |
Green Wheel Loader : Development of an energy efficient drive and control system Contribution to a book, Contribution to a conference proceedings (2014) | Schneider, Markus (Corresponding author) Koch, Oliver Weber, Jürgen Bach, Markus Jacobs, Georg |
Einflussparameter auf die Graufleckenbildung im Wälzlager Conference Presentation, Contribution to a conference proceedings (2014) | Bongardt, Christian Hentschke, Christoph Jacobs, Georg |
Energieeffizienter hybridisierter Antriebsstrang für Radlader Journal Article (2014) | Bach, Markus Jacobs, Georg Schneider, Markus Weber, Jürgen |
Testing nacelles of wind turbines with a hardware in the loop test bench Journal Article (2014) | Helmedag, Alexander Sebastian (Corresponding author) Isermann, Timo Jassmann, Uwe Radner, Dominik Abel, Dirk Jacobs, Georg Monti, Antonello |
Simulation einer mikrostrukturierten Laufwerkdichtung als flexibles Mehrkörpersystem mit Kopplung zur Elastohydrodynamik Contribution to a book, Contribution to a conference proceedings (2014) | Neumann, Stephan Straßburger, Felix Jacobs, Georg |
Einflussgrößen auf die Graufleckenbildung im Wälzlager Journal Article (2014) | Bongardt, Christian Hentschke, Christoph Jacobs, Georg |
Model predictive control of a wind turbine modelled in Simpack Contribution to a conference proceedings, Journal Article (2014) | Jassmann, Uwe (Corresponding author) Berroth, Joerg Karl (Corresponding author) Matzke, Daniel Schelenz, Ralf Reiter, Matthias Christian Jacobs, Georg Abel, Dirk |
Bewertung von Schwingungsanregung hinsichtlich möglicher Schädigung an Wälzlagern unter Einbeziehung der Umgebungskonstruktion Report (2014) | John, Sebastian Schelenz, Ralf Jacobs, Georg |
Einfluss von Vibrationsanregung auf Wälzlager Report (2014) | Jacobs, Georg Schelenz, Ralf |
Mechnisch anfahren ohne Kupplung - innovativer Ansatz zur stufenlosen Leistungsübertragung Contribution to a book, Journal Article (2014) | Pelger, Christian Martin Jacobs, Georg |
Maschinengestaltung : Vorlesungsumdruck für das Sommersemester ; Maschinengestaltung II/III Lecture (2014) | Jacobs, Georg (Editor) |
Prediction of Oil Cleanliness Class in Gearboxes Contribution to a book, Contribution to a conference proceedings (2014) | Mathy, Gunter Jacobs, Georg Hentschke, Christoph |
Interview mit Prof. Dr. Georg Jacobs, Center for Wind Power Drives (CWD) Contribution to a book (2014) | Jacobs, Georg (Interviewee) |
Interview with Prof. Dr. Georg Jacobs, Center for Wind Power Drives (CWD) Contribution to a book (2014) | Jacobs, Georg (Interviewee) |
Lifetime Model for Freewheels Operated in the Overrunning Mode Contribution to a book, Contribution to a conference proceedings (2014) | Neubert, Sebastian Hildenbrand, D. Hentschke, Christoph Jacobs, Georg |
Prognosemethodik der Schallleistung von Getrieben während der Konstruktionsphase Contribution to a conference proceedings (2013) | Kirsch, Vadim Drichel, Pascal Schelenz, Ralf Jacobs, Georg |
NVH Messungen an einer Straßenbahn Poster (2013) | Kirsch, Vadim Schelenz, Ralf Jacobs, Georg |
Feldmessungen, Beispiele von Messkampagnen des Institutes für Maschinenelemente und Maschinengestaltung Poster (2013) | Kirsch, Vadim Schelenz, Ralf Jacobs, Georg |
Full Size Ground Testing for Wind Turbines and their components Contribution to a conference proceedings (2013) | Serowy, Simon Jacobs, Georg |
Energy Efficiency of Powertrains Conference Presentation (2013) | Bach, Markus Jacobs, Georg (Corresponding author) |
Wälzlagergraufleckigkeit Journal Article (2013) | Bongardt, Christian Hentschke, Christoph Jacobs, Georg Bartel, Dirk Beilicke, Ronny Deters, Ludger |
Einfluss von instationären Betriebszuständen zur Graufleckenbildung in Wälzlagern und Klärung von Mechanismen : Forschungsvorhaben 627 Report (2013) | Bongardt, Christian Hentschke, Christoph Jacobs, Georg Bartel, Dirk Beilicke, Ronny Deters, Ludger |
Einfluss von instationären Betriebszuständen zur Graufleckenbildung in Wälzlagern und Klärung von Mechanismen : Forschungsvorhaben 627 I Report (2013) | Bongardt, Christian Hentschke, Christoph Jacobs, Georg Bartel, Dirk Beilicke, Ronny Deters, Ludger |
Ermittlung der für die Funktion von reibschlüssigen Freiläufen notwendigen (minimalen und maximalen) Anfederkräfte unter Berücksichtigung sämtlicher von der Feder zu erfüllenden Aufgaben Report (2013) | Neubert, Sebastian Ochse, Gerald Hentschke, Christoph Jacobs, Georg |
Einfluss des Partikelgehälter auf den Sekundärverschleiß : Partikelgehalt II ; Forschungsvorhaben Nr. 493 II - Abschlußbericht Report (2013) | Mathy, Gunter Rombach, Volker Hentschke, Christoph Jacobs, Georg |
Modell zur Prognose der Leerlaufverschleißlebensdauer reibschlüssiger Freiläufe Journal Article (2013) | Neubert, Sebastian Hentschke, Christoph Jacobs, Georg |
Analysis and Application of Hardware in the Loop Wind Loads for full Scale Nacelle Ground Testing Journal Article (2013) | Bosse, Dennis Radner, Dominik Schelenz, Ralf Jacobs, Georg |
Formation of Anti-Wear Films in Rolling Bearings due to Run-in Procedures Abstract, Contribution to a book, Contribution to a conference proceedings (2013) | Stratmann, Andreas Hentschke, Christoph Jacobs, Georg |
Produktpiraterie in der Antriebstechnik - Anti - Piraterie - Audit und technische Schutzmaßnahmen Contribution to a conference proceedings, Journal Article (2013) | Witter, Dennis Geiger, Rebecca Schelenz, Ralf Jacobs, Georg Seiter, Mischa Horsváth, Péter |
Prognosemethodik für die Schallleistung von Getrieben während der Konstruktionsphase Contribution to a conference proceedings, Journal Article (2013) | Kirsch, Vadim Drichel, Pascal Schelenz, Ralf Jacobs, Georg |
Erweiterung des Wöhlerlinenkonzeptes für dynamisch auf Drehschub belastete elastische Kupplungen, für sehr hohe Lastwechselzahlen sowie zur Berechnung des Temperatureinflusses und der Schadensakkumulation Contribution to a conference proceedings, Journal Article (2013) | Brammertz, Dirk Schelenz, Ralf Jacobs, Georg |
Einfluss von instationären Betriebszuständen zur Graufleckenbildung in Wälzlagern und Klärung von Mechanismen Contribution to a conference proceedings, Journal Article (2013) | Bongradt, christian Hentschke, Christoph Jacobs, Georg Deters, L. Bartel, D. Beilicke, R. |
Wann ist Wälzlagerschlupf schädlich und führt zum Ausfall des Wälzlagers Contribution to a conference proceedings, Journal Article (2013) | van Lier, Hermann Hentschke, Christoph Jacobs, Georg |
Modellbildung zur NVH Simulation eines E - MOTIVE Antriebsstrangs Contribution to a conference proceedings, Journal Article (2013) | Wegerhoff, Matthias Schelenz, Ralf Jacobs, Georg Rick, Sebastian Ferdinand Johannes Franck, David Andre Hameyer, Kay Vorländer, Michael Behler, Gottfried Kurt Klein, Johannes Christian |
Ermittlung der für die Funktion von reibschlüssigen Freiläufen notwendigen laufend (minimalen und maximalen) Anfederkräfte unter Berücksichtigung sämtlicher von der Feder zu erfüllenden Aufgaben Contribution to a conference proceedings, Journal Article (2013) | Neubert, Sebastian Hentschke, Christoph Jacobs, Georg Rienäcker, A. Ochse, G. |
Prognose des Wälzlagerverschleißverhaltens unter Berücksichtigung von Regenerationszeiten und Schmierungsbedingungen Contribution to a conference proceedings, Journal Article (2013) | Bongardt, Christian Hentschke, Christoph Jacobs, Georg |
Einfluss des Partikelgehalts von Getriebeölen auf den Sekundärverschleiß Contribution to a conference proceedings, Journal Article (2013) | Mathy, Gunter Hentschke, Christoph Jacobs, Georg |
Systemverhalten von Kupplungen bei hochdynamischen Vorgängen Contribution to a conference proceedings, Journal Article (2013) | Brammertz, Dirk Schelenz, Ralf Jacobs, Georg |
Untersuchungen zum Einfluss der Schmierstoffzusammensetzung auf die Risseinleitung bei Wälzlagern Contribution to a conference proceedings, Journal Article (2013) | Schrömbgens, Daniel Hentschek, Christoph Mathy, Gunter Jacobs, Georg Beckmann, P. Dreher, W. Hämmerle, H. Illner, Th. Bartel, D. Deterrs, L. |
Übungsumdruck für Maschinengestaltung II Book (2013) | Jacobs, Georg |
Hydraulisch-mechanischer Hybridantrieb für Flurförderfahrzeuge Contribution to a book, Contribution to a conference proceedings (2013) | Straßburger, Felix Jacobs, Georg |
Gondeltest im Labor : Center for Wind Power Drives Aachen Conference Presentation, Contribution to a conference proceedings (2013) | Jacobs, Georg |
Einflüsse von mikroskaliger Oberflächenstruktur auf die Schmierfilmbildung in EHD-Kontakten Contribution to a book, Contribution to a conference proceedings (2013) | Neubert, Sebastian Hentschke, Christoph Jacobs, Georg Rosenkranz, A. Gachot, C. Mückllich, F. |
Einfluss von Einlaufprozessen auf die Ausbildung von Verschleiß schützender Triboschichten im Wälzlager Contribution to a book, Contribution to a conference proceedings (2013) | Burghardt, Gero Jacobs, Georg Hentschke, Christoph |
Bewertung von Schwingungsanregung hinsichtlich möglicher Schädigung an Wälzlagern Contribution to a book, Contribution to a conference proceedings (2013) | Kiekbusch, T. John, Sebastian Schelenz, Ralf Sauer, B. Jacobs, Georg |
Maschinengestaltung Lecture (2013) | Jacobs, Georg Corves, Burkhard |
Tribology : lecture documentation Lecture (2013) | Jacobs, Georg Plogmann, Michael |
Dünne Schmierfilme : Untersuchung des Schmierfilmaufbaus und derReibung bei dünnen Schmierfilmen mittels Interferometrie und FE8-Wälzlagerversuchen ; Forschungsvorhaben Nr. 580 I ; Abschlussbericht Report (2013) | Hentschke, Christoph Jacobs, Georg |
Filtration of used wind turbine gear oils Contribution to a conference proceedings (2013) | Mathy, Gunter Jacobs, Georg |
Axialgleitlageranalyse- Analyse eines hydrodynamischen Axialgleitlagers unter Mischreibungsbedingungen bei Schiefstellung und experimentelle Validierung der Ergebnisse Contribution to a book, Contribution to a conference proceedings (2013) | Witter, Dennis van de Sandt, Nico Jacobs, Georg Schelenz, Ralf Rewers, G. |
Messung und Modellvalidierung an einem 1 MW WEA Gondelsystemprüfstand im Hinblick auf zukünftige Zertifizierungsprozeduren Contribution to a book, Contribution to a conference proceedings (2013) | Schelenz, Ralf Jacobs, Georg Barenhorst, Friederike Bi, Laiye Berroth, Joerg Karl |
2. Maschinengestaltung. Vorlesungsumdruck für das Sommermsemester Lecture (2013) | Jacobs, Georg (Editor) |
Energieeffiziente Antriebe für Bau- Und Landmaschinen Journal Article (2013) | Jacobs, Georg |
Untersuchung der Schmierungsbedingungen und der Kinematik reibschlüssiger Freiläufe im Leerlaufbetrieb mittels Kontaktwiderstandsmessungen Journal Article (2013) | Neubert, Sebastian Hentschke, Christoph Jacobs, Georg |
Mixed friction model for rough contacts at high pressure Journal Article (2013) | Neubert, Sebastian (Corresponding author) Porat, Artur Hentschke, Christoph Jacobs, Georg |
Antriebstechnisches Kolloquium, ATK, 2013 Book, Proceedings (2013) | Jacobs, Georg (Editor) |
Dimensionierung von Freiläufen : eine Abwägung zwischen sicherer Funktionsfähigkeit und Lebensdauer? Contribution to a book, Contribution to a conference proceedings (2013) | Neubert, Sebastian Hentschke, Christoph Jacobs, Georg |
Innere Leistungsverzweigung : ein Ansatz zur wirtschaftlichen Effizienzsteigerung von Getrieben Contribution to a book, Contribution to a conference proceedings (2013) | Ramm, Marco Körtgen, Christopher Jacobs, Georg |
Interdisziplinäre Plattform für Antriebstechnik Journal Article (2013) | Jacobs, Georg |
ATK 2013 - 15. Antriebstechnisches Kolloquium - 19.-20. März 2013 Book (2013) | Neubert, Sebastian (Editor) Jacobs, Georg (Editor) |
Tagungsband / Conference for Wind Power Drives : Aachen 19. - 20. März 2013 Book, Proceedings (2013) | Abel, Dirk (Editor) Brecher, Christian (Editor) de Doncker, Rik W. (Editor) Hameyer, Kay (Editor) Jacobs, Georg (Editor) Monti, Antonello (Editor) Schröder, Wolfgang (Editor) |
Interdisziplinäre Forschung zum Betriebsverhalten von On-Shore Windkraftanlagen auf einem neuartigen Systemprüfstand Conference Presentation (2012) | Bosse, Dennis Jacobs, Georg |
Systematic breakover of drive technologies - comparison of concepts Conference Presentation, Contribution to a book, Contribution to a conference proceedings (2012) | Jacobs, Georg Ramm, Marco Straßburger, Felix |
Verbesserte Analyse und Verständnis der Antriebsstrangdynamik durch die Nutzung von flexiblen Strukturen : (Modellierungsaufwand im Vergleich zu Modellqualität/Nutzen im Ergebnis) Contribution to a conference proceedings (2012) | Jandrey, Hauke Schelenz, Ralf Jacobs, Georg |
RWTH Aachen research program on wind power drive testing Contribution to a conference proceedings (2012) | Jacobs, Georg Schelenz, Ralf |
Gebrauchsdauerhypothese PVD-beschichteter Bauteile im Trockenlauf : Schlussbericht ; (Bewilligungszeitraum: 01.11.2009 - 31.10.2011) Report (2012) | Hentschke, Christoph Jacobs, Georg Bobzin, Kirsten |
Verschleißberechnung hydrodynamischer Gleitlager unter Mischreibungsbedingungen im EHD2-Joint Contribution to a conference proceedings (2012) | Wolking, Sebastian Hentschke, Christoph Jacobs, Georg |
Wann ist Wälzlagerschlupf schädlich und führt zum Ausfall des Wälzlagers - Zwischenbericht Contribution to a conference proceedings (2012) | Jacobs, Georg Hentschke, Christoph van Lier, Hermann |
Untersuchung zum Einfluss der Schmierstoffzusammensetzung auf die Risseinleitung bei Wälzlagern Contribution to a conference proceedings (2012) | Jacobs, Georg Hentschke, Christoph Schrömbgens, Daniel Illner, T. Deters, Ludger Hämmerle, H. Beckmann, P. |
Ermittlung der für die Funktion von reibschlüssigen Freiläufen notwendige Anfederkräfte unter Berücksichtigung sämtlicher von der Feder zu erfüllenden Aufgaben Contribution to a conference proceedings (2012) | Jacobs, Georg Hentschke, Christoph Neubert, Sebastian Rienäcker, A. Ochse, G. |
Einfluss von instationären Betriebszuständen zur Graufleckenbildung in Wälzlagern und Klärung von Mechanismen : Zwischenbericht Contribution to a conference proceedings (2012) | Jacobs, Georg Hentschke, Christoph Bongardt, Christian Deters, Ludger Bartel, D. Beilicke, Ronny |
Funktionale Erweiterung von DRESP zur durchgängigen Verwendbarkeit Contribution to a conference proceedings (2012) | Jacobs, Georg Schelenz, Ralf Juretzki, Björn |
Systematik zur Validierung und Optimierung von Schwingungssimulationsmodellen in der Antriebstechnik Contribution to a conference proceedings (2012) | Jacobs, Georg Schelenz, Ralf Juretzki, Björn |
Produktpiraterie in der Antriebstechnik : Anti-Piraterie-Audit und technische Schutzmaßnahmen Contribution to a conference proceedings (2012) | Jacobs, Georg Schelenz, Ralf Witter, Dennis Horváth, Péter Seiter, Mischa Geiger, Rebecca |
Einsatzgrenzen von hydrodynamischen Weißmetallgleitlagern infolge von Verschleiß Contribution to a conference proceedings (2012) | Jacobs, Georg Hentschke, Christoph Meier, Volker Deters, Ludger Bartel, D. Illner, T. |
Bewertung von Schwingungsanregung hinsichtlich möglicher Schädigung an Wälzlagern unter Einbeziehung der Umgebungskonstruktion Contribution to a conference proceedings, Journal Article (2012) | John, Sebastian Schelenz, Ralf Jacobs, Georg Sauer, B. Kiekbusch, T. |
Erweiterung des Wöhlerlinienkonzeptes für dynamisch auf Drehschub belastete, elastische Kupplungen für sehr hohe Lastwechselzahlen sowie zur Berechnung des Temperatureinflusses und der Schadensakkumulation Contribution to a conference proceedings, Journal Article (2012) | Brammertz, Dirk Schelenz, Ralf Jacobs, Georg |
Untersuchung des Schmierfilmaufbaus und der Reibung bei dünnen Schmierfilmen mittels Interferometrie und FE8-Wälzlagerversuchen Contribution to a conference proceedings, Journal Article (2012) | Hentschke, Christoph Jacobs, Georg |
Benetzungsverhalten von Gleitlager-Schmierstoff/Werkstoff- Kombinationen Contribution to a conference proceedings, Journal Article (2012) | Meier, Volker Hentschke, Christoph Jacobs, Georg |
Einfluss des Partikelgehalts von Getriebeölen auf den Sekundärverschleiß Contribution to a conference proceedings, Journal Article (2012) | Mathy, Gunter Hentschke, Christoph Jacobs, Georg |
Hydraulisch mechanischer Energiespeicher - Konzeption und Deminsionierung eines Energiespeichersystems für hydrostatische Antriebe in mobilen Arbeitsmaschinen Journal Article (2012) | Straßburger, Felix Jacobs, Georg |
Tribologie - Vorlesungsumdruck : 10/2012 Lecture (2012) | Jacobs, Georg (Editor) Plogmann, Michael |
Tribology - lecture documentation Lecture (2012) | Jacobs, Georg Plogmann, Michael |
Maschinengestaltung : Vorlesungsumdruck für das Wintersemester Lecture (2012) | Jacobs, Georg (Editor) |
Untersuchung der Schmierungsbedingungen und der Kinematik reibschlüssiger Freiläufe im Leerlaufbetrieb mittels Kontaktwiderstandsmessungen Contribution to a book, Contribution to a conference proceedings (2012) | Neubert, Sebastian Hentschke, Christoph Jacobs, Georg |
Einsatz von Hartstoffschichten in trockenlaufenden Wälzlagern am Beispiel (Cr,AI)N Contribution to a book, Contribution to a conference proceedings (2012) | Jacobs, Georg Hentschke, Christoph van Lier, Hermann Bobzin, Kirsten Bagcivan, Nazlim Theiß, Sebastian Weiß, Raphael |
Mixed friction model for rough contacts at high contact pressure Contribution to a conference proceedings (2012) | Neubert, Sebastian Porat, Artur Hentschke, Christoph Jacobs, Georg |
15. Antriebstechnisches Kolloquium (ATK) kündigt sich an für März 2013 Contribution to a book, Journal Article (2012) | Jacobs, Georg Neubert, Sebastian |
Hydrodynamic bearing analysis of a planetary gear in a geared turbofan Conference Presentation (2012) | Jacobs, Georg Rombach, Volker Popel, Sebastian (Corresponding author) |
Einfluss der Schmierstoffformulierung auf Schmierfilmaufbau und Reibungseigenschaften bei dünnen Schmierfilmen Contribution to a conference proceedings (2012) | Hentschke, Christoph Jacobs, Georg |
Filtrierung gebrauchter WEA-Getriebeöle Contribution to a conference proceedings (2012) | Mathy, Gunter Jacobs, Georg Hentschke, Christoph |
Einflussparameter auf die Entstehung von Graufleckigkeit in Wälzlagern Contribution to a conference proceedings (2012) | Bongardt, Christian Jacobs, Georg Hentschke, Christoph |
Maschinengestaltung - Vorlesungsumdruck für das Sommersemester Lecture (2012) | Jacobs, Georg (Editor) |
Hydro-mechanical Energy Storage System for Hydrostatic Transmissions in Mobile Machinery Contribution to a conference proceedings (2012) | Straßburger, Felix Jacobs, Georg |
Effect of Lubricant Properties on Torque Transmission of Frictionally Engaged Overrunning Clutches Contribution to a book, Contribution to a conference proceedings (2012) | Neubert, Sebastian Jacobs, Georg Rombach, Volker Kretschmer, Torsten |
Portierung von Berechnungsroutinen aus DYLA und DRESP nach SIMPACK Report (2011) | Augustino, Romie Jacobs, Georg Schelenz, Ralf |
Erweiterung des Wöhlerlinienkonzeptes für dynamisch auf Drehschub belastete elastische Kupplungen, für sehr hohe Lastwechselzahlen sowie zur Berechnung des Temperatureinflusses und der Schadensakkumulation Contribution to a conference proceedings (2011) | Brammertz, Dirk Schelenz, Ralf Jacobs, Georg |
Simulation hochbelasteter, langsam drehender Radialgleitlager im Mischreibungsbereich unter Berücksichtigung elastischer Verformung und Verschleiß Contribution to a book, Contribution to a conference proceedings (2011) | Witter, Dennis Schelenz, Ralf Jacobs, Georg |
Klemmkörperanfederkräfte Ermittlung der für die Funktion von reibschlüssigen Freiläufen notwendige Anfederkräfte unter Berücksichtigung sämtlicher von der Feder zu erfüllenden Aufgabe : Zwischenbericht ; FVA 646 I Klemmkörperanfederkräfte Contribution to a conference proceedings, Journal Article (2011) | Neubert, Sebastian Rombach, Volker Jacobs, Georg |
Institut für Maschinenelemente und Maschinengestaltung - Instituts Information Book (2011) | Jacobs, Georg (Editor) |
Einfluss von instationären Betriebszuständen zur Graufleckenbildung in Wälzlagern und Klärung von Mechanismen : Zwischenbericht Contribution to a conference proceedings (2011) | Bongardt, Christian Rombach, Volker Jacobs, Georg |
Bewertung von Schwingungsanregung hinsichtlich möglicher Schädigung an Wälzlagern unter Einbeziehung der Umgebungskonstruktion : Zwischenbericht Contribution to a conference proceedings (2011) | John, Sebastian Kiekbusch, T. Sauer, Bernd Schelenz, Ralf Jacobs, Georg |
Systematik zur Erstellung, Validierung und Optimierung von Schwingungssimulationsmodellen in der Antriebstechnik - Abschlussbericht Journal Article (2011) | Juretzki, Björn Schelenz, Ralf Jacobs, Georg |
Einfluss von Stillstandszeiten in feuchter Umgebung und Schmierfettzusammensetzung auf die Gebrauchsdauer von Wälzlager : Abschlussbericht Contribution to a conference proceedings, Journal Article (2011) | Schrömbgens, Daniel Rombach, Volker Jacobs, Georg |
Funktionale Erweiterung von DRESP zur durchgängigen Verwendbarkeit : Zwischenbericht Contribution to a conference proceedings (2011) | Flock, Sebastian Juretzki, Björn Schelenz, Ralf Jacobs, Georg |
Thema: Untersuchung des Schmierfilmaufbaus und der Reibung bei dünnen Schmierfilmen mittels Interferometrie und FE8-Wälzlagerversuchen : Zwischenbericht Contribution to a conference proceedings (2011) | Hentschke, Christoph Rombach, Volker Jacobs, Georg |
Einfluss des Partikelgehaltes von Getriebeölen auf den Sekundärverschleiß : Zwischenbericht Contribution to a conference proceedings (2011) | Mathy, Gunter Rombach, Volker Jacobs, Georg |
Einfluss der gebrauchsbedingten Veränderungen auf die Filtrierbarkeit hochviskoser Getriebeöle : Abschlussbericht Contribution to a conference proceedings (2011) | Mathy, Gunter Rombach, Volker Jacobs, Georg |
Erweiterung des Wöhlerlinienkonzeptes für dynamisch auf Drehschub belastete elastische Kupplungen für sehr hohe Lastwechselzahlen sowie zur Berechnung des Temperatureinflusses und der Schadensakkumulation - Zwischenbericht Contribution to a conference proceedings (2011) | Brammertz, Dirk Schelenz, Ralf Jacobs, Georg |
Schmiermittelfreier Wälzlagerbetrieb durch PVD-Beschichtungen Contribution to a book, Contribution to a conference proceedings (2011) | Jacobs, Georg van Lier, Hermann Rombach, Volker Bobzin, Kirsten Bagivan, N. Theiß, Sebastian Weiß, Raphael |
Drum prüfe, wer sich bindet - Untersuchung der Energieeffizienz von mobilen Arbeitsmaschinen an der RWTH Aachen Journal Article (2011) | Bach, Markus Radner, Dominik Jacobs, Georg |
PVD-beschichteteWälzlager im Trockenlauf Journal Article (2011) | Jacobs, Georg Rombach, Volker Plogmann, Michael van Lier, Hermann Bobzin, Kirsten Bagcivan, Nazlim Theiß, Sebastian Weiß, Raphael (Corresponding author) |
Elastomerkupplungen Contribution to a book, Contribution to a conference proceedings (2011) | Jacobs, Georg Mödder, Ralf Brammertz, Dirk Schelenz, Ralf |
Dauerfestigkeitsnachweis hydrodynamisch belasteter Weißmetalllager Contribution to a book, Contribution to a conference proceedings (2011) | Jacobs, Georg (Corresponding author) Gold, Peter Werner (Corresponding author) Rombach, Volker (Corresponding author) Limmer, Martin (Corresponding author) Popel, Sebastian (Corresponding author) Broeckmann, Christoph (Corresponding author) Beiss, Paul (Corresponding author) Nesic, Dragomir (Corresponding author) |
Einfluss der Schmierstoffformulierung auf die Fluidreibung im EHD-Kontakt Contribution to a book, Contribution to a conference proceedings (2011) | Jacobs, Georg Rombach, Volker Hentschke, Christoph |
Tribologie : Vorlesungsumdruck Lecture (2011) | Jacobs, Georg (Editor) Plogmann, Michael (Editor) |
Tribology : lecture documentation Book (2011) | Jacobs, Georg (Editor) Plogmann, Michael (Editor) |
Maschinengestaltung : Vorlesungsumdruck für das Wintersemester Lecture (2011) | Jacobs, Georg (Editor) |
Tagungsband / Antriebstechnisches Kolloquium, ATK 2011, Heavy Drive Train Conference : Aachen, 29. - 30. März 2011 Book, Proceedings (2011) | Jacobs, Georg (Editor) Hameyer, Kay (Editor) Brecher, Christian (Editor) |
Akustisches Verhalten von hochdrehenden, spielarmen Elektromotor-Getriebe Einheiten Report (2010) | Bosse, Dennis Lange, Enno Adalbert Schelenz, Ralf Jacobs, Georg |
Beurteilung des schmierstoffbedingten Verschleißverhaltens von Wälzlagern unter Berücksichtigung von Bauart und Baugröße Contribution to a conference proceedings (2010) | Jacobs, Georg Hentschke, Christoph |
Getriebeölfiltrierbarkeit Contribution to a conference proceedings (2010) | Jacobs, Georg Mathy, Gunter |
Einfluss der gebrauchsbedingten Veränderungen auf die Filtrierbarkeit hochviskoser Getriebeöle : Zwischenbericht Contribution to a conference proceedings (2010) | Jacobs, Georg Mathy, Gunter |
Modellfindung Schwingungssimulation : Zwischenbericht Contribution to a conference proceedings (2010) | Jacobs, Georg Schelenz, Ralf Juretzki, Björn |
E-Motor-Getriebe-Akustik Contribution to a conference proceedings (2010) | Bosse, Dennis Lange, Enno Adalbert Schelenz, Ralf van der Giet, Michael Hameyer, Kay Jacobs, Georg |
High Speed Motor-Getriebe-Akustik Contribution to a conference proceedings (2010) | Bosse, Dennis Lange, Enno Adalbert Schelenz, Ralf van der Giet, Michael Hameyer, Kay Jacobs, Georg |
Einfluss der Wälzlagerbaugröße auf das Verschleißverhalten von Wälzlagern : Zwischenbericht Contribution to a conference proceedings (2010) | Jacobs, Georg Hentschke, Christoph |
Einfluss des Partikelgehalts von Getriebeölen auf den Sekundarverschleiß - Zwischenbericht Contribution to a conference proceedings (2010) | Jacobs, Georg |
Untersuchung des schmierfilmaufbaus und der Reibung bei dünnen Schmierfilmen mittels Interferometrie und FE8-Wälzlagerversuchen : Zwischenbericht Contribution to a conference proceedings (2010) | Jacobs, Georg Schelenz, Ralf Brammertz, Dirk |
Prognosemethodik für die Schwingungsregung von Getrieben an der Schnittstelle Getriebefundament Contribution to a conference proceedings (2010) | Jacobs, Georg Schelenz, Ralf Kurutas, Savas |
Einfluss von Stillstandszeiten in feuchter Umgebung und Schmierfettzusammensetzung auf die Gebrauchsdauer von Wälzlagern : Zwischenbericht Contribution to a conference proceedings (2010) | Jacobs, Georg Schrömbgens, Daniel Rombach, Volker |
PVD-beschichtete Wälzlager im Trockenlauf Contribution to a conference proceedings (2010) | van Lier, Hermann Rombach, Volker Plogmann, Michael Jacobs, Georg Bobzin, Kirsten Bagcivan, Nazlim Theiß, Sebastian Göbbels, Nico |
Ermüdungslebensdauerverlängerung bei Wälzlagern mittels PVD-Beschichtungen - ein Erklärungsansatz Contribution to a book, Contribution to a conference proceedings (2010) | Jacobs, Georg Plogmann, Michael Gold, Peter Werner Rombach, Volker |
Tribologische Untersuchungen an beschichteten Wälzlagern unter Berücksichtigung der Schmierfilmeigenschaften Contribution to a book (2010) | Gold, Peter Werner Jacobs, Georg Loos, Jörg Plogmann, Michael |
Erfassung tribologischer Zusammenhänge und Erkenntnisse in einer Datenbank Contribution to a book (2010) | Gold, Peter Werner Jacobs, Georg Loos, Jörg Rombach, Volker Kurutas, Savas Fröde, Astrid |
Einfluss der Wälzlagerbaugröße auf das Verschleißverhalten von Wälzlagern Contribution to a conference proceedings (2010) | Jacobs, Georg Rombach, Volker Hentschke, Christoph |
Kupplungskennwerte und Kennwertabhängigkeit von Großkupplungen Contribution to a conference proceedings (2010) | Jacobs, Georg Brammertz, Dirk Schelenz, Ralf |
Akustisches Verhalten von hochdrehenden, spielarme Elektromotor-Getrieb Einheiten Contribution to a conference proceedings (2010) | Jacobs, Georg Bosse, Dennis Hameyer, Kay Schelenz, Ralf van der Giet, Michael Lange, Enno Adalbert |
Bericht der Forschungstelle IME, RWTH Aachen University: Entwicklung einer umweltverträglichen Weißmetalllegierung auf Basis der IWK-K-Legierung und Steigerung der Festigkeit um 20% gegenüber heute weltweit etablierten Sn-Basislegierungen Contribution to a conference proceedings (2010) | Jacobs, Georg Rombach, Volker Limmer, Martin |
Maschinengestaltung : Vorlesungsumdruck für das Wintersemester Lecture (2010) | Jacobs, Georg (Editor) |
Environmentally friendly tribological systems in axial piston machines Journal Article (2010) | Murrenhoff, Hubertus Enekes, Claus Peter Gold, Peter Werner Jacobs, Georg Rombach, Volker Plogmann, Michael Bobzin, Kirsten Bagcivan, Nazlim Theiß, Sebastian Göbbels, Nico |
Maschinengestaltung Book (2010) | Jacobs, Georg (Editor) |
Messen in der Fluidtechnik : Teil 5 (Fortsetzung): Mechanik und Bewegung Journal Article (2010) | Jacobs, Georg Weber, Oliver |
Messen in der Fluidtechnik : Teil 5: Mechanik und Bewegung Journal Article (2010) | Jacobs, Georg Weber, Oliver |
Hydraulic displacement pump as environmentally friendly tribosystem by PVD-coatings Journal Article (2010) | Plogmann, Michael Jacobs, Georg Rombach, Volker Murrenhoff, Hubertus Enekees, Claus |
Tribological Aspects of PVD-Coated and Ecological Lubricated Roller Bearings Abstract, Contribution to a book, Contribution to a conference proceedings (2010) | Plogmann, Michael Jacobs, Georg Gold, Peter Werner Rombach, Volker Dott, Wolfgang Michael, Sabrina |
Enviromentally Friendly Tribological Systems in Axial Piston Pumps Abstract, Contribution to a book, Contribution to a conference proceedings (2010) | Plogmann, Michael Jacobs, Georg Enekes, Claus Peter Murrenhoff, Hubertus Gold, Peter Werner Rombach, Volker Theiß, Sebastian Göbbels, Nico Bagcivan, Nazlim Bobzin, Kirsten |
Ermüdungsmechanismen und Lebensdauer dynamisch hoch belasteter Radialgleitlager Conference Presentation (2009) | Limmer, Martin Jacobs, Georg Gold, Peter Werner |
Simulation der dynamischen Beanspruchungen des Antriebsstranges von WEA Contribution to a conference proceedings (2009) | Jacobs, Georg Schelenz, Ralf Möller, Dennis |
Tribology : lecture documentation ; Issue WT 2009/2010 Book (2009) | Jacobs, Georg Plogmann, Michael |
High Speed Motor-Getriebe-Akustik : Zwischenbericht Contribution to a conference proceedings (2009) | Bosse, Dennis Lange, Enno Adalbert Schelenz, Ralf Hameyer, Kay Jacobs, Georg |
Gebrauchtöl Filtrierbarkeit : Zwischenbericht Contribution to a conference proceedings (2009) | Jacobs, Georg Mathy, Gunter |
Untersuchung des schmierfilmaufbaus und der Reibung bei dünnen Schmierfilmen mittels Interferometrie und FE-Wälzlagerversuchen - Zwischenbericht Contribution to a conference proceedings (2009) | Jacobs, Georg |
Schwingungsprognose Getriebefundament Contribution to a conference proceedings (2009) | Jacobs, Georg |
Kupplungskennwerte und Kennwertsabhängigkeiten von Großkupplungen - Zwischen/Abschlußbericht Contribution to a conference proceedings (2009) | Jacobs, Georg Schelenz, Ralf Brammertz, Dirk |
Versuche zur Ermüdungs-Lebensdauer dynamisch hoch beanspruchter Radialgleitlager Contribution to a book, Contribution to a conference proceedings (2009) | Limmer, Martin Jacobs, Georg Gold, Peter Werner Rombach, Volker |
Akustisches Verhalten von hochdrehenden, spielarmen Servomotor-Getriebe Einheiten : Zwischenbericht Contribution to a conference proceedings (2009) | Bosse, Dennis Lange, Enno Adalbert Jacobs, Georg Hameyer, Kay |
Einfluss von Stillstandszeiten in feuchter Umgebung und Schmierfettzusammensetzung auf die Gebrauchsdauer von Wälzlagern : Zwischenbericht Contribution to a conference proceedings (2009) | Jacobs, Georg Karbacher, R. Schrömbgens, Daniel |
Bewertung von Schwingungsanregung hinsichtlich möglicher Schädigung an Wälzlagern unter Einbeziehung der Umgebungskonstruktion Contribution to a conference proceedings (2009) | Jacobs, Georg Schelenz, Ralf John, Sebastian Sauer, Bernd Kikbusch, T. |
Das neue Achtgang-Automatikgetriebe von BMW Contribution to a conference proceedings (2009) | Jacobs, Georg Kretschmer, Jan Arman, Kara |
Kupplungskennwerte und Kennwertabhängigkeiten von Großkupplungen : Zwischenbericht Contribution to a conference proceedings (2009) | Jacobs, Georg Baumeister, Ralf Brammertz, Dirk Schelenz, Ralf |
Entwicklung einer umweltverträglichen Weißmetalllegierung auf Basis der IWK-K-Legierung und Steigerung der Festigkeit um 20 % gegenüber heute weltweit etablierten Sn-Basislegierungen Contribution to a conference proceedings (2009) | Jacobs, Georg Rombach, Volker Limmer, Martin |
Prognosemethodik für die Schwingungsanregung von Getrieben an der Schnittstelle Getriebefundament : Zwischenbericht Contribution to a conference proceedings (2009) | Jacobs, Georg Schelenz, Ralf Kurutas, Savas |
Einfluss der Wälzlagerbaugröße auf das Verschleißverhalten von Wälzlagern : Zwischenbericht Contribution to a conference proceedings (2009) | Jacobs, Georg Rombach, Volker Hentschke, Christoph |
Einfluss der gebrauchsbedingten Veränderungen auf die Filtrierbarkeit hochviskoser Getriebeöle : Zwischenbericht Contribution to a conference proceedings (2009) | Jacobs, Georg Rombach, Volker Mathy, Gunter |
Untersuchung des Schmierfilmaufbaus und der Reibung bei dünnen Schmierfilmen mittels Interferometrie und FE8-Wälzlagerversuchen : Zwischenbericht Contribution to a conference proceedings (2009) | Jacobs, Georg Rombach, Volker Gierlings, Sabrina |
Tribology : lecture documentation ; Issue WT 2009/2010 Lecture (2009) | Jacobs, Georg |
Maschinengestaltung : Vorlesungsumdruck für das Wintersemester Lecture (2009) | Jacobs, Georg (Editor) |
Maschinengestaltung : Vorlesungsumdruck für das Sommersemester Lecture (2009) | Gold, Peter Werner (Editor) Jacobs, Georg (Editor) |
Versuche zur Ermüdungs-Lebensdauer dynamischer hoch beanspruchter Radialgleitlager Contribution to a book, Contribution to a conference proceedings (2009) | Limmer, Martin (Corresponding author) Jacobs, Georg (Corresponding author) Gold, Peter Werner (Corresponding author) Rombach, Volker (Corresponding author) |
Ermüdung dynamisch hoch belasteter hydrodynamischer Radialgleitlager Contribution to a book, Contribution to a conference proceedings (2009) | Limmer, Martin Rombach, Volker Jacobs, Georg Gold, Peter Werner |
Einsatz von PVD-Beschichtungen im Tribosystem Wälzlager Contribution to a book, Contribution to a conference proceedings (2009) | Plogmann, Michael Rombach, Volker Jacobs, Georg Gold, Peter Werner |
PVD-Beschichtungen im Wälzlagereinsatz und ihre tribologische Wirkung Contribution to a book, Contribution to a conference proceedings (2009) | Plogmann, Michael Rombach, Volker Gold, Peter Werner Jacobs, Georg |
Tagungsband / Antriebstechnisches Kolloquium, ATK 2009 : Fahrzeugtechnik, Energietechnik, Grundlagen ; Aachen, 05. - 06. Mai 2009 Proceedings (2009) | Jacobs, Georg (Editor) |
Ermüdung dynamisch hoch belasteter hydrodynamischer Radialgleitlager Contribution to a book, Contribution to a conference proceedings (2007) | Gold, Peter Werner Jacobs, Georg Wolf, Thomas Rombach, Volker Limmer, Martin |