Vita

Mr. Berroth studied Mechanical Engineering at RWTH Aachen University.

After completing his studies, he was employed from 2012 to 2014 at IME as a research associate in the Drive Technology department. His research focused on the analysis of entire system and drivetrain dynamics in wind turbines. In the teaching field, he was responsible for the design subject area.

After 2014, Mr. Berroth continued his work at the Center for Wind Power Drives, CWD for short. There he headed the System Design department's modeling and simulation research group until August 2017. This research group's work focuses on the further development of simulation methods based on elastic multi-body simulation.

In August 2017 he received his doctoral degree at the Chair for Wind Power Drives with the "Impact of Rotor Blades Pitch Dynamics on the Load of Pitch Systems of Wind Turbines."

Mr. Berroth returned to MSE, formerly IME, in September 2017 and since then he has headed the Department of Systems Engineering - Modelling and Simulation (formerly Drive Technology).

 

 

Publications

Source	Author(s)
[Journal Article] A system modeling process based on SysML to support data consistency across system requirement, function, and solution model layers In: Journal of engineering design, 2023 [DOI: 10.1080/09544828.2023.2247860]	Zhang, Yizhe (Corresponding author) Jacobs, Georg Yu, Wei Höpfner, Gregor Berroth, Joerg Karl
[Journal Article] Calculation of tooth pair stiffness by finite element analysis for the multibody simulation of flexible gear pairs with helical teeth and flank modifications In: Multibody system dynamics, 2023 [DOI: 10.1007/s11044-023-09926-4]	Andary, Faysal (Corresponding author) Heinzel, Christine Wischmann, Stefan Tobias Berroth, Joerg Karl Jacobs, Georg
[Contribution to a conference proceedings] An Improved Method for Fem Modeling and Param- Eter Identification of Damping in Bolted Lap Joints Using Zero-Thickness Elements In: [ICSV29, 29th International Congress on Sound and Vibration], 2023	Wischmann, Stefan Tobias Berroth, Joerg Karl König, Florian Jacobs, Georg
[Journal Article] Optimization workflow to parameterize elastomer material models based on arbitrary time‐domain measurement data In: Journal of applied polymer science, 140 (25), e53974, 2023 [DOI: 10.1002/app.53974]	Rapp, Tobias (Corresponding author) Jacobs, Georg Berroth, Joerg Karl Bauermeister, Ralf Wischmann, Stefan Tobias
[Report] Rechnergestützte Prognose des dynamischen Verhaltens von Elastomerkupplungen in stoßbelasteten Antriebssträngen - Abschlussbericht, 2023	Rapp, Tobias Jacobs, Georg Berroth, Joerg Karl
[Contribution to a book, Journal Article] Towards hierarchical workflows in sysml to support virtual validation of technical systems In: Applied Sciences, 13 (8), 5122, 2023 [DOI: 10.3390/app13085122]	Zhang, Yizhe (Corresponding author) Jacobs, Georg Höpfner, Gregor Berroth, Joerg Karl
[Report] Fügestellenmodellierung für die Sytemsimulation - Abschlussbericht, 2023	Wischmann, Stefan Tobias Berroth, Joerg Karl Jacobs, Georg
[Contribution to a conference proceedings] Numerische Transferpfadanalyse zur modellbasierten Optimierung des Geräuschverhaltens von Antriebssträngen In: [DAGA 2023], 2023	Wischmann, Stefan Tobias Pasch, Gerwin Jacobs, Georg Berroth, Joerg Karl
[Contribution to a conference proceedings, Journal Article] Customer-centric and function-oriented development of mechatronic systemsKundenzentrierte und funktionsorientierte Entwicklung mechatronischer Systeme In: Forschung im Ingenieurwesen = Engineering research, 87 (1), 507-519, 2023 [DOI: 10.1007/s10010-023-00658-7]	Zerwas, Thilo (Corresponding author) Jacobs, Georg Brand, L. Dehn, Simon Michael Spütz, Kathrin et al.
[Contribution to a conference proceedings, Journal Article] On identifying possible artificial intelligence applications in requirements engineering processes In: Forschung im Ingenieurwesen = Engineering research, 87 (1), 497-506, 2023 [DOI: 10.1007/s10010-023-00657-8]	Dehn, Simon Michael (Corresponding author) Jacobs, Georg Zerwas, Thilo Berroth, Joerg Karl Hötter, Matthis Peter et al.
[Contribution to a conference proceedings, Journal Article] Model-based NVH optimization of a tractor drivetrain during different phases of a design adaption In: Forschung im Ingenieurwesen = Engineering research, 87 (1), 147-157, 2023 [DOI: 10.1007/s10010-023-00632-3]	Müller, Julius (Corresponding author) Jacobs, Georg Ramm, Marco Wischmann, Stefan Tobias Jagla, Patrick Karol et al.
[Contribution to a conference proceedings, Journal Article] An investigation into the transferability of dynamic elastomer dampers’ properties between different damper sizes using FEM In: Forschung im Ingenieurwesen = Engineering research, 87 (1), 411-420, 2023 [DOI: 10.1007/s10010-023-00637-y]	Rapp, Tobias (Corresponding author) Jacobs, Georg Berroth, Joerg Karl Kleinewegen, Stefan
[Contribution to a conference proceedings, Journal Article] Reusable workflows for virtual testing of multidisciplinary products in system models In: Forschung im Ingenieurwesen, 87 (1), 339-351, 2023 [DOI: 10.1007/s10010-023-00621-6]	Berges, Julius Moritz (Corresponding author) Spütz, Kathrin Zhang, Yizhe Höpfner, Gregor Berroth, Joerg Karl et al.
[Contribution to a conference proceedings, Journal Article] Classification of function-oriented solution elements for MBSE In: Forschung im Ingenieurwesen = Engineering research, 87 (1), 469-477, 2023 [DOI: 10.1007/s10010-023-00651-0]	Jagla, Patrick Karol (Corresponding author) Jacobs, Georg Spütz, Kathrin Berroth, Joerg Karl
[Journal Article] Towards a Holistic and Functional Model-Based Design Method for Mechatronic Cyber-Physical Systems In: Journal of computing and information science in engineering, 23 (5), 051001, 2023 [DOI: 10.1115/1.4056807]	Höpfner, Gregor (Corresponding author) Nachmann, Imke Helene Zerwas, Thilo Berroth, Joerg Karl Kohl, Jens et al.
[Contribution to a conference proceedings, Journal Article] Combining sensitivity and uncertainty analysis to efficiently quantify parametric uncertainties in NVH system simulation models In: Forschung im Ingenieurwesen = Engineering research, 87 (1), 453-467, 2023 [DOI: 10.1007/s10010-023-00644-z]	Wischmann, Stefan Tobias (Corresponding author) Drichel, Pascal Jacobs, Georg Berges, Julius Moritz Berroth, Joerg Karl
[Journal Article] Enhanced method for optimum driving point identification for modal testing In: Journal of vibration and control : JVC, 29 (7/8), 1472-1483, 2022 [DOI: 10.1177/10775463211064699]	Pasch, Gerwin (Corresponding author) Wischmann, Stefan Tobias Drichel, Pascal Jacobs, Georg Berroth, Joerg Karl
[Contribution to a book, Contribution to a conference proceedings] Classification of Engineering Models by Physical Effects In: IEEE ISSE 2022 : 8th IEEE International Symposium on Systems Engineering : Vienna, Austria, October 24-26, 2022 : ISSE 2022 conference proceedings / sponsors and organizers: IEEE, IEEE Systems Council, 8 Seiten, 2022 [DOI: 10.1109/ISSE54508.2022.10005543]	Jagla, Patrick Karol (Corresponding author) Jacobs, Georg (Corresponding author) Höpfner, Gregor (Corresponding author) Berroth, Joerg Karl (Corresponding author) Jin, Kaihao (Corresponding author)
[Contribution to a book, Contribution to a conference proceedings] Development of System Alternatives using Generative Engineering In: IEEE ISSE 2022 : 8th IEEE International Symposium on Systems Engineering : Vienna, Austria, October 24-26, 2022 : ISSE 2022 conference proceedings / sponsors and organizers: IEEE, IEEE Systems Council, 6 Seiten, 2022 [DOI: 10.1109/ISSE54508.2022.10005535]	Menninger, Bastian (Corresponding author) Berroth, Joerg Karl (Corresponding author) Jacobs, Georg (Corresponding author)
[Contribution to a book, Contribution to a conference proceedings] Towards Digitalization of Physical Effect Libraries In: IEEE ISSE 2022 : 8th IEEE International Symposium on Systems Engineering : Vienna, Austria, October 24-26, 2022 : ISSE 2022 conference proceedings / sponsors and organizers: IEEE, IEEE Systems Council, 8 Seiten, 2022 [DOI: 10.1109/ISSE54508.2022.10005547]	Meißner, Maximilian (Corresponding author) Dehn, Simon Michael (Corresponding author) Jacobs, Georg (Corresponding author) Berges, Julius Moritz (Corresponding author) Berroth, Joerg Karl (Corresponding author) et al.
[Contribution to a book, Journal Article] Automated Identification of Valid Model Networks Using Model-Based Systems Engineering In: Systems : open access journal, 10 (6), 250, 2022 [DOI: 10.3390/systems10060250]	Berges, Julius Moritz (Corresponding author) Spütz, Kathrin Jacobs, Georg Kowalski, Julia Zerwas, Thilo et al.
[Journal Article] Characterization of elastohydrodynamic contact film thickness under high frequency force excitation using a 2D unwrapping-based image processing technique In: Tribology international, 175, 107841, 2022 [DOI: 10.1016/j.triboint.2022.107841]	Golafshan, Reza (Corresponding author) Su, Boquan Jacobs, Georg Berroth, Joerg Karl
[Journal Article] Towards a Model-Based Approach for the Optimization of the Mechanical and Economical Properties of Laser-Based Plastic-Metal Joints In: Key engineering materials : KEM, 934, 75-80, 2022 [DOI: 10.4028/p-wcv8f2]	Berges, Julius Moritz (Corresponding author) van der Straeten, Kira Martina (Corresponding author) Jacobs, Georg (Corresponding author) Berroth, Joerg Karl (Corresponding author)
[Contribution to a conference proceedings] Vernetzung von Simulationsmodellen und Model-Based Systems Engineering zur virtuellen Produktentwicklung In: [NAFEMS DACH Regionalkonferenz - Konferenz für Berechnung & Simulation im Engineering, NRC 22, 2022-10-04 - 2022-10-06, Bamberg, Germany], 263-267, 2022	Berges, Julius Moritz Jacobs, Georg Höpfner, Gregor Zhang, Yizhe Berroth, Joerg Karl
[Contribution to a book, Journal Article] A Numerical Approach for the Efficient Concept Design of Laser-Based Hybrid Joints In: Applied Sciences, 12 (20), 10649, 2022 [DOI: 10.3390/app122010649]	Berges, Julius Moritz (Corresponding author) Jacobs, Georg Berroth, Joerg Karl
[Contribution to a conference proceedings] Modellierung und Analyse funktionaler Varianz komplexer technischer Systeme In: [33. DfX-Symposium 2022], [1]-10, 2022 [DOI: 10.35199/dfx2022.15]	Menninger, Bastian Wiechel, Dominik Rackow, Sascha Höpfner, Gregor Oleff, Christian et al.
[Contribution to a book, Journal Article] Virtual Testing Workflows Based on the Function-Oriented System Architecture in SysML: A Case Study in Wind Turbine Systems In: Wind, 2 (3), 599-616, 2022 [DOI: 10.3390/wind2030032]	Zhang, Yizhe (Corresponding author) Röder, Julian Jacobs, Georg Berroth, Joerg Karl Höpfner, Gregor
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Classification of Simulation Models for the Model-based Design of Plastic-Metal Hybrid Joints In: Procedia CIRP, 109, 37-42, 2022	Spütz, Kathrin (Corresponding author) Berges, Julius Moritz Jacobs, Georg Berroth, Joerg Karl Konrad, Christian
[Contribution to a conference proceedings, Journal Article] Classification of Simulation Models for the Model-based Design of Plastic-Metal Hybrid Joints In: Procedia CIRP, 109, 37-42, 2022 [DOI: 10.1016/j.procir.2022.05.211]	Spütz, Kathrin (Corresponding author) Berges, Julius Moritz Jacobs, Georg Berroth, Joerg Karl Konrad, Christian
[Journal Article] On the influence of surface sealant on the nonlinear dynamics of jointed structures In: Mechanical systems and signal processing : mssp, 173, 109061, 2022 [DOI: 10.1016/j.ymssp.2022.109061]	Wischmann, Stefan Tobias (Corresponding author) Seifert, Karl-Heinz Berroth, Joerg Karl Jacobs, Georg
[Contribution to a book, Journal Article] Optimization Workflows for Linking Model-Based Systems Engineering (MBSE) and Multidisciplinary Analysis and Optimization (MDAO) In: Applied Sciences, 12 (11), 5316, 2022 [DOI: 10.3390/app12115316]	Habermehl, Christian (Corresponding author) Höpfner, Gregor Berroth, Joerg Karl Neumann, Stephan Jacobs, Georg
[Journal Article] Determining Dynamic Properties of Elastomer-Dampers by Means of Impact Testing In: Experimental mechanics, 62 (5), 823-836, 2022 [DOI: 10.1007/s11340-022-00832-y]	Rapp, T. (Corresponding author) Jacobs, Georg Berroth, Joerg Karl Guenther, J.
[Contribution to a book] Function-Oriented Model-Based Product Development In: Design Methodology for Future Products : Data Driven, Agile and Flexible / Dieter Krause, Emil Heyden, 131, 2021	Jacobs, Georg Konrad, Christian Berroth, Joerg Karl Zerwas, Thilo Höpfner, Gregor et al.
[Journal Article] Towards Holistic System Models Including Domain-Specific Simulation Models Based on SysML In: Systems : open access journal, 9 (4), 76-97, 2021 [DOI: 10.3390/systems9040076]	Zhang, Yizhe (Corresponding author) Höpfner, Gregor Berroth, Joerg Karl Pasch, Gerwin Jacobs, Georg
[Contribution to a book, Journal Article] Model-Based Estimation of the Strength of Laser-Based Plastic-Metal Joints Using Finite Element Microstructure Models and Regression Models In: Materials, 14 (17), 5004, 2021 [DOI: 10.3390/ma14175004]	Berges, Julius Moritz (Corresponding author) van der Straeten, Kira Martina Jacobs, Georg Berroth, Joerg Karl Gillner, Arnold
[Journal Article] On magnetization deviations as the dominant cause for vibration harmonics in the spectrum of a PMSM drive In: Archives of electrical engineering, 70 (3), 719-730, 2021 [DOI: 10.24425/aee.2021.137584]	Jaeger, Markus (Corresponding author) Drichel, Pascal (Corresponding author) Schröder, Michael Berroth, Joerg Karl Jacobs, Georg et al.
[Contribution to a book, Contribution to a conference proceedings] Influence of Model Detail Level on the Prognosis Quality of the Perceived Sound of an Electrified Passenger Car Powertrain In: 19th Drive Train Technology Conference (ATK 2021) : 9th-11th March 2021, Aachen, Germany / editorial board: Prof. Dr.-Ing. Georg Jacobs, Sebastian Stein, M.Sc, 012010, 1-12, 2021 [DOI: 10.1088/1757-899X/1097/1/012010]	Drichel, Pascal (Corresponding author) Jaeger, Markus (Corresponding author) Möller-Giebeler, Mark (Corresponding author) Berroth, Joerg Karl Schröder, Marc et al.
[Contribution to a book, Contribution to a conference proceedings] Damage Diagnosis of Cardan Shafts in Mobile Mining Machines using Vibration Analysis In: 19th Drive Train Technology Conference (ATK 2021) 9th-11th March 2021, Aachen, Germany, 012019, 1-12, 2021 [DOI: 10.1088/1757-899X/1097/1/012019]	Golafshan, Reza (Corresponding author) Dascaliuc, Catalin Jacobs, Georg Roth, David Johannes Berroth, Joerg Karl et al.
[Contribution to a book, Contribution to a conference proceedings] Model-Based Design Workflows for Cyber-Physical Systems Applied to an Electric-Mechanical Coolant Pump In: 19th Drive Train Technology Conference (ATK 2021) 9th-11th March 2021, Aachen, Germany, 012004, 1-15, 2021 [DOI: 10.1088/1757-899X/1097/1/012004]	Höpfner, Gregor (Corresponding author) Jacobs, Georg Zerwas, Thilo Drave, Imke Helene Berroth, Joerg Karl et al.
[Contribution to a book, Contribution to a conference proceedings] Mechanical concept development using principle solution models In: 19th Drive Train Technology Conference (ATK 2021) : 9th-11th March 2021, Aachen, Germany / editorial board: Prof. Dr.-Ing. Georg Jacobs, Sebastian Stein, M.Sc., 012001, 2021 [DOI: 10.1088/1757-899X/1097/1/012001]	Zerwas, Thilo (Corresponding author) Jacobs, Georg Spütz, Kathrin Höpfner, Gregor Drave, Imke Helene et al.
[Contribution to a book, Contribution to a conference proceedings] Acoustic Optimization of a Power Take-off Gear Box Using Numerical Transfer Path Analysis In: 19th Drive Train Technology Conference (ATK 2021) : 9th-11th March 2021, Aachen, Germany / editorial board: Prof. Dr.-Ing. Georg Jacobs, Sebastian Stein, M.Sc, 012012, 1-10, 2021 [DOI: 10.1088/1757-899X/1097/1/012012]	Wischmann, Stefan Tobias (Corresponding author) Pasch, Gerwin Berroth, Joerg Karl Jacobs, Georg
[Contribution to a book, Contribution to a conference proceedings] Numerical Transfer Path Analysis for NVH System-Simulation Models In: 19th Drive Train Technology Conference (ATK 2021) : 9th-11th March 2021, Aachen, Germany / editorial board: Prof. Dr.-Ing. Georg Jacobs, Sebastian Stein, M.Sc., 012008, 1-12, 2021 [DOI: 10.1088/1757-899X/1097/1/012008]	Pasch, Gerwin (Corresponding author) Jacobs, Georg Berroth, Joerg Karl
[Journal Article] Systematische Nutzung von Modellen in künftigen Produktentwicklungsprozessen In: News / Mitteilungen der WiGeP, 2020 (2), 8-10, 2020	Jacobs, Georg Berroth, Joerg Karl Höpfner, Gregor Sprehe, Jonathan Konrad, Christian
[Journal Article] NVH System Simulation of a Tractor with Hydrostatic-Mechanical Power Split Transmission In: Landtechnik, 75 (4), 301-315, 2020 [DOI: 10.15150/lt.2020.3254]	Pasch, Gerwin (Corresponding author) Jacobs, Georg Berroth, Joerg Karl
[Contribution to a book, Contribution to a conference proceedings] Modeling Mechanical Functional Architectures in SysML In: Proceedings of the 23rd ACM/IEEE International Conference on Model Driven Engineering Languages and Systems, 79-89, 2020 [DOI: 10.1145/3365438.3410938]	Drave, Imke Helene Rumpe, Bernhard Wortmann, Andreas Berroth, Joerg Karl Höpfner, Gregor et al.
[Report] Verzahnungsmodellierung für Systemsimulation - Abschlussbericht, 2020	Andary, Faysal Jacobs, Georg Zalfen, Moritz Johannes Wischmann, Stefan Tobias Berroth, Joerg Karl
[Journal Article] Die Kopplung elektrotechnischer und strukturdynamischer Domänen zu einem NVH-Systemmodell eines elektrischen Antriebsstrangs In: Elektrotechnik und Informationstechnik : e & i, 137 (4/5), 258-265, 2020 [DOI: 10.1007/s00502-020-00802-z]	Jaeger, Markus (Corresponding author) Drichel, Pascal Schröder, Michael Berroth, Joerg Karl Jacobs, Georg et al.
[Report] Erweiterung der Simulationsmöglichkeiten für maschinenakustische Untersuchungen an E-Motive-Antrieben im Kontext zur Fahrzeugstruktur, 2019	Jaeger, Markus Drichel, Pascal Müller-Giebeler, Mark Behrang Schröder, Michael Berroth, Joerg Karl et al.
[Report] FVA-Nr. 685 II Kupplungsstöße : Systemverhalten von Elastomerkupplungen unter stoßartiger Belastung, 2019	Rapp, Tobias Jacobs, Georg Berroth, Joerg Karl
[Contribution to a book, Contribution to a conference proceedings] Multi-Domain Simulation for the Assessment of the NVH Behaviour of a Tractor with Hydrostatic-Mechanical Power Split Transmission In: Land.Technik AgEng 2019 : Hannover, Nov. 8th + 9th 2019 : 77th International Conference on Agricultural Engineering / VDI-Wissensforum ; Supporters: VDI Max-Eyth Society for Agricultural Engineering (VDI-MEG), the European Society of Agricultural Engineers (EurAgEng), DLG, 8 Seiten, 2019 [DOI: 10.18154/RWTH-2020-00568]	Pasch, Gerwin Jacobs, Georg Höpfner, Gregor Berroth, Joerg Karl
[Contribution to a book, Contribution to a conference proceedings] Modellbildung und Analyse des NVH-Verhaltens moderner Antriebsstrangkonzepte am Beispiel eines elektrifizierten PKW sowie eines Traktors In: Dresdner Maschinenelemente Kolloquium : DMK 2019 : 26.-27. Nov. / Technische Universität Dresden ; Fakultät Maschinenwesen, Institut für Maschinenelemente und Maschinenkonstruktion, IMM ; Herausgeber: Prof. Dr.-Ing. Berthold Schlecht, 543-560, 2019	Höpfner, Gregor Jacobs, Georg Pasch, Gerwin Drichel, Pascal Berroth, Joerg Karl
[Conference Presentation] NVH-Systemanalyse und -simulation am Beispiel eines E-Fahrzeug-Antriebsstrangs In: PAK-Tag Fürstenfeldbruck 2019-05-14 - 2019-05-15, 2019 [DOI: 10.18154/RWTH-2019-08249]	Höpfner, Gregor Jacobs, Georg Drichel, Pascal Berroth, Joerg Karl
[Contribution to a book, Contribution to a conference proceedings] Methodik zur modellbasierten NVH-Analyse von Traktoren mit hydrostatisch-mechanischen Leistungsverzweigungsgetrieben In: Antriebstechnisches Kolloquium : ATK 2019, Aachen 12.-13. März : Tagungsband / Herausgegeben von Univ.-Prof. Dr.-Ing. Georg Jacobs und Jonas Marheineke, M.Sc. (Institut für Maschinenelemente und Systementwicklung); MSE, Institut für Maschinenelemente und Systementwicklung, RWTH Aachen University, 309-327, 2019 [DOI: 10.18154/RWTH-2019-05395]	Pasch, Gerwin Jacobs, Georg Höpfner, Gregor Berroth, Joerg Karl
[Contribution to a book, Contribution to a conference proceedings] A Benchmark Study for MEMS-Sensors-Based Fault Diagnosis for Rolling Bearings In: Antriebstechnisches Kolloquium : ATK 2019, Aachen 12.-13. März : Tagungsband / Herausgegeben von Univ.-Prof. Dr.-Ing. Georg Jacobs und Jonas Marheineke, M.Sc. (Institut für Maschinenelemente und Systementwicklung); MSE, Institut für Maschinenelemente und Systementwicklung, RWTH Aachen University, 15-30, 2019 [DOI: 10.18154/RWTH-2019-05391]	Golafshan, Reza Jacobs, Georg Andary, Faysal Berroth, Joerg Karl
[Journal Article] An Energy-Based Load Distribution Approach for the Application of Gear Mesh Stiffness on Elastic Bodies In: Journal of mechanical design, 141 (9), 095001, 2019 [DOI: 10.1115/1.4043313]	Andary, Faysal (Corresponding author) Berroth, Joerg Karl Jacobs, Georg
[Contribution to a book, Contribution to a conference proceedings] Modellierungsmethodik zur multiaxialen Abbildung des höherfrequenten Übertragungsverhaltens von Elastomerlagern in der NVH-Systemsimulation In: Antriebstechnisches Kolloquium : ATK 2019, Aachen 12.-13. März : Tagungsband / Herausgegeben von Univ.-Prof. Dr.-Ing. Georg Jacobs und Jonas Marheineke, M.Sc. (Institut für Maschinenelemente und Systementwicklung); MSE, Institut für Maschinenelemente und Systementwicklung, RWTH Aachen University, 359-381, 2019 [DOI: 10.18154/RWTH-2019-03693]	Drichel, Pascal Jacobs, Georg Wischmann, Stefan Tobias Berroth, Joerg Karl
[Journal Article] Investigation of Rolling Bearing Condition Monitoring Techniques Based on Long Term Run-to-Failure Vibration Data In: Bearing world journal, 3, 107-118, 2018 [DOI: 10.18154/RWTH-2021-04406]	Golafshan, Reza Jacobs, Georg Berroth, Joerg Karl
[Conference Presentation] Multi-domain simulation for the assessment of the NVH-behavior of electric vehicles with special attention to the influence of rotor eccentricity In: Dassault Systemes User Conference = Dassault Systèmes User Conference Hanau 2018-12-04 - 2018-12-06, 2018	Drichel, Pascal Müller-Giebeler, Mark Behrang Jaeger, Markus Berroth, Joerg Karl Jacobs, Georg et al.
[Conference Presentation] Drivetrain Simulation for the Assessment of the NVH-Behavior of Electric Vehicles In: 4. Wind & Drivetrain Conference, 2018	Drichel, Pascal Jacobs, Georg Müller-Giebeler, Mark Behrang Jaeger, Markus Berroth, Joerg Karl et al.
[Contribution to a book, Contribution to a conference proceedings] MBSE on parameter level In: Berechnung und Simulation: Anwendungen, Entwicklungen, Trends : NAFEMS 18 DACH Conference : 14-16 May, Bamberg, Germany : conference proceedings / NAFEMS, the International Association for the Engineering Modelling, Analysis and Simulation Community ; the conference is organized by NAFEMS Deutschland, Österreich, Schweiz GmbH, 129-132, 2018	Katzwinkel, Tim Jacobs, Georg von Fürstenberg, Franz Konrad, Christian Berroth, Joerg Karl
[Journal Article] Investigation on the Effects of Structural Dynamics on Rolling Bearing Fault Diagnosis by Means of Multibody Simulation In: International journal of rotating machinery, 2018, 5159189, 2018 [DOI: 10.1155/2018/5159189]	Golafshan, Reza (Corresponding author) Jacobs, Georg Wegerhoff, Matthias Drichel, Pascal Berroth, Joerg Karl
[Contribution to a book, Contribution to a conference proceedings] Bestimmung des Einflusses von aktiven Turmschwingungsreduktionsmaßnahmen auf die Getriebe und Turmkopflasten einer Windenergieanlage In: (R)Evolution des Antriebs - Auswirkung auf die Betriebsfestigkeit der Bauteile in der Wirkungskette : 44. Tagung des DVM-Arbeitskreises Betriebsfestigkeit : 11. und 12, Oktober 2017, Friedrichshafen / DVM Deutscher Verband für Materialforschung und -prüfung e.V. ; Obmann: Dr.-Ing. M. Brune, BMW Group, München, 2017	Werkmeister, Alexander Torsten Jacobs, Georg Kamper, Tim Berroth, Joerg Karl Schelenz, Ralf
[Poster] Influence of the detail of a wind turbine model in respect to the soil and structure to the load calculation In: 13. Internationale Windenergie-Konferenz Bremen 2017-10-17 - 2017-10-18, 2017	Werkmeister, Alexander Torsten (Corresponding author) Jacobs, Georg Schelenz, Ralf Berroth, Joerg Karl Michel, Philipp et al.
[Dissertation / PhD Thesis] Einfluss der Stelldynamik der Rotorblätter auf die Lasten der Blattverstellsysteme von Windenergieanlagen, 2017	Berroth, Jörg Karl
[Contribution to a book, Contribution to a conference proceedings, Journal Article] Investigation on pitch system loads by means of an integral multi body simulation approach In: Journal of physics / Conference Series, 753, 112002, 2016 [DOI: 10.1088/1742-6596/753/11/112002]	Berroth, Joerg Karl (Corresponding author) Jacobs, Georg Kroll, T. Schelenz, Ralf
[Journal Article] Zwangskräfte und Biegemomente - Non-Torque Loads - in Antriebssträngen von Windturbinen: Wirkungsvolle Reduktion von Zwangskräften und Biegemomentenmit Hilfe einer Low-Speed Kupplung aus Verbundwerkstoffen In: Wind-Kraft-Journal & natürliche Energien, 2, 22-26, 2016	Kari, Alexander (Corresponding author) Jacobs, Georg Sigle, Christof Schelenz, Ralf Berroth, Joerg Karl et al.
[Poster] The Effect of a Flexible Low-Speed Coupling on the Wind Drivetrain`s Dynamics In: EWEA 2015 Annual Event - The European Wind Energy Association Paris 2015-11-17 - 2015-11-20, 2015	Kari, Alexander Jacobs, Georg Sigle, Christof Schelenz, Ralf Berroth, Joerg Karl et al.
[Conference Presentation] Nacelle Test Benches for Model Validation In: Simpack Wind and Drive Train Conference Hamburg 2015-10-07 - 2015-10-07, 2015	Berroth, Joerg Karl (Corresponding author) Bi, Laiye (Corresponding author) Matzke, Daniel (Corresponding author) Werkmeister, Alexander Torsten (Corresponding author) Schelenz, Ralf (Corresponding author) et al.
[Poster] 10MW low wind turbine In: 14. World Wind Energy Conference Jerusalem 2015-10-26 - 2015-10-28, 2015	Berroth, Joerg Karl Busch, C. Schelenz, Ralf Jacobs, Georg
[Conference Presentation] The Effect of a Flexible Low-Speed Coupling on the Wind Drivetrain`s Dynamics In: 5. International Conference DRIVETRAIN Concepts for Wind Turbines Bremen 2014-10-27 - 2014-10-29, 2015	Kari, Alexander Jacobs, Georg Sigle, Christof Schelenz, Ralf Berroth, Joerg Karl et al.
[Poster] EF2046: Erweiterte Antriebsstrangsimulation für Windenergieanlagen In: Statusseminar Energieforschung NRW Düsseldorf 2014 Düsseldorf 2014-12-14 - 2014-12-14, 2014	Kamper, Tim Berroth, Joerg Karl Schelenz, Ralf Berger, Günter Jacobs, Georg
[Contribution to a conference proceedings] Simpack in the Design Process of Wind Turbines : from Entire Systems to Subcomponent Dynamics In: [Simpack User Meeting, Augsburg, Germany], 2014	Berroth, Joerg Karl
[Contribution to a conference proceedings] Dynamic drive train analysis and control of geared wind turbine pitch systems In: 4th International Conference E/E-Systems for Wind Turbines : Bremen, 19-22 May, 2014, 2014	Berroth, Joerg Karl Kamper, Tim (Corresponding author) Schelenz, Ralf (Corresponding author) Jacobs, Georg (Corresponding author)
[Contribution to a conference proceedings, Journal Article] Model predictive control of a wind turbine modelled in Simpack In: Journal of physics / Conference series, 524, 012047, 2014 [DOI: 10.1088/1742-6596/524/1/012047]	Jassmann, Uwe (Corresponding author) Berroth, Joerg Karl (Corresponding author) Matzke, Daniel Schelenz, Ralf Reiter, Matthias Christian et al.
[Contribution to a book, Contribution to a conference proceedings] Messung und Modellvalidierung an einem 1 MW WEA Gondelsystemprüfstand im Hinblick auf zukünftige Zertifizierungsprozeduren In: 4. VDI-Fachtagung Schwingungen von Windenergieanlagen 2013 : mit Fachausstellung ; Bremen, 19. und 20. Februar 2013 / VDI - Schwingungstechnik, 201-214, 2013	Schelenz, Ralf Jacobs, Georg Barenhorst, Friederike Bi, Laiye Berroth, Joerg Karl
[Conference Presentation] Advanced Modeling of Wind Turbine Drive Trains Including Aeroelastics : With Regard to the Coupled Dynamics of Tower and Drive Train In: 1. International Conference Advances in Wind Turbine Towers Bremen 2012-08-28 - 2012-08-30, 33 Folien, 2012	Schelenz, Ralf Berroth, Joerg Karl (Corresponding author)
[Contribution to a conference proceedings] F&E-Modelle für WEA-Antriebsstränge In: 16. Fachkongress Zukunftsenergien Windenergie : EnergieAgentur.NRW ; Essen, 07.02.2012, 2012	Schelenz, Ralf Barenhorst, Friederike Berroth, Joerg Karl