Person
Martin Linzmayer
M. Sc.Address
Building: 1310
Room: 301
Schinkelstr. 10
52062 Aachen
Contact
- WorkPhone
- Phone: +49 241 80 95677
Vita
Martin Linzmayer, M.Sc. studied Biomedical Engineering at the Univerity of Rostock (Universität Rostock) from 2009 till 2015. During his studies Mr. Linzmayer worked for the company Cortronik GmbH and at the institute for textile technique (Institut für Textiltechnik) at RWTH Aachen as a student assistant.
In addition, Mr. Linzmayer completed an internship at Uniklinik RWTH Aachen in collaboration with the Institute of Applied Medical Engineering in the field of tissue engineering.
Since November 2015, Mr. Linzmayer has been working as a research assistant at the MSE (former IME) in the field tribology. The main focus, he deals with the subject of freewheels and the issue of joint storage.
In teaching, Mr. Linzmayer oversees the Metrological Laboratory (MTL) and is responsible for the correction of the exams.
Publications
Source | Author(s) |
---|---|
[Journal Article] Accelerated White Etch Cracking (WEC) FE8 type tests of different bearing steels using ceramic rollers In: Wear : an international journal on the science and technology of friction, lubrication and wear, 494/495, 204230, 2021 [DOI: 10.1016/j.wear.2021.204230] | Danielsen, H. K. (Corresponding author) Gutierrez Guzman, Francisco Gerardo Antonio Fæster, S. Shirani, M. Rasmussen, B. H. et al. |
[Journal Article] Interlaboratory comparison : Round robin test for the damage reproduction of white etching crack in cylindrical roller thrust bearings In: Wear : an international journal on the science and technology of friction, lubrication and wear, 480/481, 203925, 2021 [DOI: 10.1016/j.wear.2021.203925] | Linzmayer, Martin (Corresponding author) Jacobs, Georg Sous, Christopher Gutierrez Guzman, Francisco Gerardo Antonio |
[Journal Article] Post-testing measurement of freely movable and diffusible hydrogen in context of WEC formation at cylindrical roller thrust bearings from 100Cr6 In: Friction, 9 (4), 876-890, 2020 [DOI: 10.1007/s40544-020-0454-4] | Linzmayer, Martin (Corresponding author) Gutierrez Guzman, Francisco Gerardo Antonio Manke, Gregor Jacobs, Georg Sous, Christopher et al. |
[Book, Report] Risse auf Lagerringen : Ringversuch : Abschlussbericht : Forschungsvorhaben Nr. 707 : Ringversuch zur reproduzierbaren Erzeugung von Gefügeveränderungen in Wälzlagern mit Rissen als Folgeschaden In: FVA-Heft 1357, 2019 | Linzmayer, Martin Jacobs, Georg Sous, Christopher |
[Book, Report] Risse auf Lagerringen : Wasserstoffdetektion : Abschlussbericht : Forschungsvorhaben Nr. 707 : Detektion von diffusiblem Wasserstoff in Hinblick auf Gefügeveränderungen in Wälzlagern mit Rissen als Folgeschaden In: FVA-Heft 1356, 2019 | Linzmayer, Martin Gutierrez Guzman, Francisco Gerardo Antonio Steinweg, Florian Özel, Mehmet Ozan Mikitisin, Adrian et al. |
[Contribution to a book, Contribution to a conference proceedings] Detektion von diffusiblem Wasserstoff im Zusammenhang mit der Entstehung und Ausbreitung von WEC In: Antriebstechnisches Kolloquium ATK 2019 : Tagungsband : Aachen, 12. - 13. März 2019 / herausgegeben von Univ.-Prof. Dr.-Ing. Georg Jacobs und Jonas Marheineke, M. Sc. (Institut für Maschinenelemente und Systementwicklung), 43-67, 2019 [DOI: 10.18154/RWTH-2019-05394] | Linzmayer, Martin Jacobs, Georg Gutierrez Guzman, Francisco Gerardo Antonio Sous, Christopher Pohl, Michael |
[Contribution to a conference proceedings] FVA 707 IV - Risse auf Lagerringen - Wasserstoffdetektion In: FVA-Informationstagung : 04. und 05. Dezember 2018 in Würzburg / Forschungsvereinigung Antriebstechnik e.V., 2018 | Linzmayer, Martin Jacobs, Georg Gutierrez Guzman, Francisco Gerardo Antonio Sous, Christopher Steinweg, Florian et al. |
[Poster] Gelenklagerprüfstand : Reibung und Verschleiß von Radial-Gelenklagern In: 17. Antriebstechnisches Kolloquium Aachen 2017-03-07 - 2017-03-08, 2017 | Linzmayer, Martin |