Person

Dennis Keller

M. Sc. RWTH
Chair and Institute for Machine Elements and Systems Engineering

Address

Building: 1310

Room: 306

Schinkelstr. 10

52062 Aachen

Contact

workPhone
Phone: +49 241 80 95607
 

Vita

Dennis Keller, M.Sc. studied towards a Bachelor degree in Mechanical Engineering at RWTH Aachen University from 2011 to 2016 with a specialization in "Design Technology". In 2017 he completed the "Development and Construction" Master degree program, also at RWTH Aachen University. As part of his thesis, he investigated the lubricant-related power loss in gears and roller bearings using CFD simulations.

Mr. Keller has been employed as a research associate at MSE in the Off-Highway department since 2017. He deals with the simulation-based friction reduction in elastomer seals.

 

Publications

Source Author(s)
[Contribution to a book, Contribution to a conference proceedings]
Development of a low-friction radial shaft seal: Using CFD simulations to optimise the microstructured sealing lip
In: ECOTRIB 2019 : 7th European Conference on Trbology width special event 4th Austria-India-Symposium on Materials Engineering and Tribology, MaTri'19 : book of abstracts / Editors: N. Dörr ; C. Gachot ; F. Franek ; M. Kalin ; E. Ciolli ; R. Crockett, 2019
Keller, Dennis
Jacobs, Georg
Kramer, Achim
[Contribution to a book, Contribution to a conference proceedings]
Friction Reduction of dynamic Elastomer Seals by Microstructuring of the Seal Sliding Surface
In: Zylinderlaufbahn, Kolben, Pleuel 2018 : der Kurbeltrieb im Spannungsfeld unterschiedlicher Anforderungen : Baden Baden, 05. und 06. Juni 2018. VDI-Fachtagung / VDI-Gesellschaft Materials Engineering, 137-152, 2018
Keller, Dennis
Jacobs, Georg
Kramer, Achim
Neumann, Stephan
Paulkowski, D.
et al.
[Contribution to a book, Contribution to a conference proceedings]
Reibungsreduzierung dynamischer Elastomerdichtungen durch die simulationsgestützte Optimierung der mikrostrukturierten Dichtfläche
In: Sealing technology - beyond limitations : International Sealing Conference : 20th ISC : Stuttgart, Germany, Oct. 10-11, 2018 / eine Kooperation von IMA Uni Stuttgart, VDMA Fluidtechnik, 2018
Keller, Dennis
Jacobs, Georg
Kramer, Achim
Neumann, Stephan
[Conference Presentation]
Reibungsreduzierung dynamischer Elastomerdichtungen durch Mikrostrukturierung der Dichtungsgleitfläche
In: 9. VDI-Fachtagung "Zylinderlaufbahn, Kolben, Pleuel 2018" Baden-Baden 2018-06-05 - 2018-06-06, 2018
Keller, Dennis
Jacobs, Georg
Kramer, Achim
Neumann, Stephan
Paulkowski, Dominik
et al.
[Contribution to a book, Contribution to a conference proceedings]
Reibungsreduzierung dynamischer Elastomerdichtungen durch Mikrostrukturierung der Dichtungsgleitfläche
In: 9. VDI-Fachtagung Zylinderlaufbahn, Kolben, Pleuel 2018 : der Kurbeltrieb im Spannungsfeld unterschiedlicher Anforderungen : Baden-Baden, 05. und 06. Juni 2018, 137-153, 2018
Keller, Dennis
Jacobs, Georg
Kramer, Achim
Neumann, Stephan
Paulkowski, Dominik
et al.
[Contribution to a conference proceedings]
Reibungsreduktion dynamischer Elastomerdichtungen durch Lasermikrostrukturierung und plasmapolymere Beschichtung
In: [6. ATZ-Fachtagung Tribologie "Reibungsminimierung im Antriebsstrang"], 2017
Keller, Dennis
Jacobs, Georg
Kramer, Achim
Neumann, Stephan
Paulkowski, Dominik
et al.