Fluid power networks : proceedings : 19th - 21th March 2018 : 11th International Fluid Power Conference
Murrenhoff, Hubertus (Editor)
Aachen : [Mainz] (2018)
Buch, Tagungsband
Einrichtungen
- Lehrstuhl und Institut für fluidtechnische Antriebe und Systeme [412810]
Identifikationsnummern
- ISBN: 3-95886-215-2
- ISBN: 978-3-95886-215-9
- DOI: 10.18154/RWTH-2018-224356
- RWTH PUBLICATIONS: RWTH-2018-224356
Downloads
Verwandte Publikationen
- [RWTH-2018-224544] Predictive Maintenance Service Powered by Machine Learning and Big Data
- [RWTH-2018-224545] From Big Data to Smart Data
- [RWTH-2018-224546] Towards digitalization of hydraulic systems using soft sensor networks
- [RWTH-2018-224614] Benchmarking of potential substituents for leaded bronze in axial sliding bearings for mobile hydraulic applications
- [RWTH-2018-224615] Investigation of the Thermal Behaviour in the Lubricating Gap of an Axial Piston Pump with Respect to Lifetime
- [RWTH-2018-224616] Reducing the wall thickness of the cups and pistons in Floating Cup pumps and motors
- [RWTH-2018-224617] Noise and vibration reduction for an aerospace secondary controlled hydraulic motor
- [RWTH-2018-224618] myCro - Downsizing of hydraulic power units by revolutionizing the design
- [RWTH-2018-224619] Computer-assisted modeling and automatic controller adjustment for hydraulic drives based on an innovative nonparametric identification method
- [RWTH-2018-224620] Dynamic High-Torque Test Stand with Hydrostatic Drive
- [RWTH-2018-224622] Electro-Hydrostatic Drive Concept for the Ring Rolling Process
- [RWTH-2018-224623] Systematic Data Analysis for Optimal System Design
- [RWTH-2018-224625] Experimental Evaluation of the New Meter Out Sensing Architecture
- [RWTH-2018-224627] Adaptive Park Brake Technology to Improve Stability of Wheeled Excavators
- [RWTH-2018-224628] Quantification of Energy Saving Influencers in a 21t Excavator Hydraulic System - A Holistic Investigation?
- [RWTH-2018-224629] Control design and validation for the hydraulic DOT500 wind turbine
- [RWTH-2018-224630] Characterization and Calibration of a Power Regenerative Hydrostatic Wind Turbine Test Bed using an Advanced Control Valve
- [RWTH-2018-224631] Electrification of Hydraulics Opens New Ways for Intelligent Energy-Optimized Systems
- [RWTH-2018-224633] High-dynamic Proportional Solenoid on basis of Established Production Technologies
- [RWTH-2018-224634] Proportional Pressure Reducing Valves with Intrinsic Fail Safe Function
- [RWTH-2018-224635] Proportional Leak-Free Pressure Control Valve
- [RWTH-2018-224637] Smart hydraulic cylinder with force measurement system
- [RWTH-2018-224638] Sealing Systems for Hydraulic Cylinders
- [RWTH-2018-224639] The improvement of the total efficiency of the gerotor orbital hydraulic motor
- [RWTH-2018-224640] An Active-control digital hydraulic damper: Design, modeling and simulation
- [RWTH-2018-224642] The optimization design algorithm of hydraulic components under multiple operating conditions
- [RWTH-2018-224643] The Development of an integrated monitoring and filtration system for performance assurance of hydraulic mould oscillation systems used in continuous casting machines at flat steel plants
- [RWTH-2018-224644] Experimental Investigation of a Directly Driven Hydraulic Unit in an Industrial Application
- [RWTH-2018-224645] Reliability Evaluation of Hydraulic Pump Based on Performance Degradation
- [RWTH-2018-224646] Efficiency Study of an Electro-Hydraulic Excavator
- [RWTH-2018-224647] Wireless Control of an Electro-hydraulic Robotic Manipulator
- [RWTH-2018-224648] A new type of hydraulic swing drive with integrated motion sensor for narrow spaces
- [RWTH-2018-224649] Hydraulic Multi-axial Levelling Control for Turbine Access System of Offshore Wind Farm
- [RWTH-2018-224650] Application of Pneumatic Muscle Actuator to Pulse Diagnosis System of Chinese Therapy
- [RWTH-2018-224652] Fault Diagnosis of Pneumatic Actuator Based on Virtual Prototype Fault Simulation
- [RWTH-2018-224653] On Stability of the Two Stage Piloted Gas Pressure Control Unit
- [RWTH-2018-224654] Principle and Application in FAST of Parallel Reliability Test Bench
- [RWTH-2018-224655] Oil film characteristics and failure mechanism analysis of one kind of mechanical seal under the effect of fluid-structure-thermal coupling
- [RWTH-2018-224656] Innovative Structural Design and Coupled Vibration Analysis of the Bionic Hydraulic Pipeline
- [RWTH-2018-224657] Experimental Researches to Measure the Total Resistance Forces that Appear at the Switching Process of Directional Control Valves
- [RWTH-2018-224355] Fluid power networks : proceedings : 19th - 21th March 2018 : 11th International Fluid Power Conference
- [RWTH-2018-224357] Fluid power networks : proceedings : 19th - 21th March 2018 : 11th International Fluid Power Conference
- [RWTH-2018-224531] Transient simulation of a pneumatic sharp edged L-shaped pipe
- [RWTH-2018-224543] A survey of "Industrie 4.0" in the field of Fluid Power - challenges and opportunities by the example of field device integration
- [RWTH-2018-224632] Design study of a high speed power unit for electro hydraulic actuators (EHA) in mobile applications
- [RWTH-2018-224641] A control approach for fast voice coil actuators for servo valve applications in mobile and industrial hydraulics
- [RWTH-2018-224658] Surface tension of fuels - Analysis of measurement methods and applicability on rail-pressure environments