Product Development Laboratory D³

3D printer for the production of prototypes and illustrative objects from gypsum powder. The gypsum powder is solidified layer by layer in the binder jetting process by applying a binder. A special feature of the ProJet 660Pro is the ability to produce full-color objects for initial function tests, installation analyses and for communicating function and design.

• Print volume (x y z) 381 x 254 x 203 mm
• Layer height 0.1 mm
• Detail size 0.1 mm
• Number of colors 390,000 colors

Wacom Cintiq 24HD touch

• 24 inch graphics tablet for digital support of creative processes in product development and design. A pressure- and tilt-sensitive pen can be used to draw directly on the screen.

Handheld 3D scanner for effective and reliable 3D measurements of physical objects, for inspection and reverse engineering.

• Accuracy up to 0.030 mm
• Volumetric accuracy 0.020 mm + 0.060 mm/m
• Object size 0.1 m to unlimited

3D printer for the production of prototypes and small series products from plastics such as PLA or ABS. The plastic is melted in the Fused Filament Fabrication process (FFF) and applied layer by layer through a nozzle.

Ultimaker 2

• Print volume (x y z) 223 x 223 x 205 mm
• nozzle diameter 0.2 - 0.8 mm
• Layer height 0.02 - 0.4 mm
• Accuracy 0.1 mm 

Ultimaker 2 Extended

• Print volume (x y z) 223 x 223 x 305 mm
• nozzle diameter 0.2 - 0.8 mm
• Layer height 0.02 - 0.4 mm
• Accuracy 0.1 mm

3D printer for the production of prototypes and small series products from photopolymers (resins). The photopolymer is solidified layer by layer in the stereolithography process (SLA) by means of a laser or a UV light source. A special feature of Formlab Form 2 is the possibility of producing objects with very fine structures.

• Print volume (x y z) 145 x 145 x 175 mm
• Focus diameter 140 µm
• Layer height 25 - 100 µm

3D printer for the production of prototypes and small series products from plastics such as PLA or ABS. The plastic is melted in the Fused Filament Fabrication process (FFF) and applied layer by layer through a nozzle. A special feature of the Felix Pro 2 here is the dual extruder system, which allows two different materials to be processed during one printing process.

• Print volume (x y z) 237 x 244 x 235 mm
• Nozzle diameter 2x 0.2 - 0.6 mm
• layer height 0,05 - 0,35 mm
• Accuracy 0,1 mm

3D printer for the production of prototypes and small series products made of plastics such as polyamide 12 (PA 12). The plastic is heated in powder form in the selective laser sintering (SLS) process and solidified layer by layer by means of a laser. The special feature of the Sintratec kit is the high mechanical load-bearing capacity of the objects and increased design freedom due to the support of overhangs in the powder bed.

• Print volume (x y z) 110 x 110 x 110 mm
• Focus diameter 140 µm
• Layer height 100 µm

3D printer for the production of prototypes and small series products from plastics such as PLA or ABS. The plastic is melted in the Fused Filament Fabrication process (FFF) and applied layer by layer through a nozzle. A special feature of the Creality CR-10 5s is the large installation space, which enables the production of objects with dimensions of up to 500 mm.

• Print volume (x y z) 500 x 500 x 500 mm
• nozzle diameter 0.2 - 1.2 mm
• Layer height 0.05 - 0.6 mm